JL Audio 10WXv2 Owner's Manual
Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have your
enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 10WXv2-4 JL AUDIO 10WXv2-4 3
SUBWOOFER 10WXv2-4
Free Air Resonance (Fs): 29.38 Hz
Electrical “Q” (Qes): 0.471
Mechanical “Q” (Qms): 10.021
Total Speaker “Q” (Qts): 0.450
Equivalent Compliance (Vas):
1.660 ft
3
47.01 liters
One-way, Linear Excursion (Xmax)*:
0.375 in.
9.5 mm
Efficiency (1W/1m)**: 86.06 dB SPL
Effective Piston Area (Sd):
50.690 in
2
0.0327 m
2
DC Resistance (Re): 3.51 ohm
Nominal Impedance: 4 ohm
Power Handling (continuous): 200 W
* Xmax specifications are derived via one-way voice coil overhang method
with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output
capability and should not be used as a comparison to other subwoofers
to determine which one is “louder” !
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)Fc(Hz)
Qtc
10WXv2-4
0.625 ft
3
17.70 liters
17.25 in. x 11 in. x 9 in.
438 mm x 279 mm x 229 mm
48 56.18 .8604
All specifications are subject to change without notice.
A
B
E
D
C
10WXv2 SUBWOOFER
PHYSICAL SPECIFICATIONS
Nominal Diameter:
10.0 in.
250 mm
Overall Diameter (A):
10.52 in.
267 mm
Mounting Hole Diameter (B):
9.0625 in.
230 mm
Bolt Hole Circle (C):
9.7 in.
246.5 mm
Magnet Diameter (D):
4.13 in
105 mm
Mounting Depth (E):
4.8 in.
122 mm
Net Weight:
5.3 lbs.
2.40 kg
Driver Displacement:
0.032 ft
3
0.91 liters
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
(Width x Height x Depth)
Round Port Specs
(Inner Diameter x Length)
Port Information
Tune to:
(Hz)F3(Hz)
10WXv2-4
1.000 ft
3
28.32 liters
22 in. x 12 in. x 10.5 in.
559 mm x 305 mm x 267 mm
3 in. x 13.5 in.
76.2 mm x 342 mm
Round port requires a 90˚ elbow
to fit in the specified enclosure
35 39
!!
CAUTION
!!
JL AUDIO 10WXv2-4
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
• The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using 5/8" (16mm) thick
material, subtract 1/4" (6.5mm) from each dimension.
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
• All enclosure volumes listed are net inte rnal
volumes! Box volume displacement, port
displacement and brace displacement must be
added to obtain the final gross internal volume. All
enclosure dimensions listed have already taken this
into account.
• When using two subwoofers in a common
enclosure simply double the required volume and,
in the case of a ported enclosure, use two times the
recommended port(s).
• We recommend the use of this speaker in a bi-amplified
system using high-quality s atellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type o f
device will adversely affec t performance.
U.S. PATENT: #6,219,431
Loading...