JLab Audio Bouncer User Manual

The Bouncer Bluetooth Stereo Speaker

1

Welcome to JLab!

Speaker

Remote

AC/DC

Power

Adapter

Quick Start

Guide

The Bouncer

Quick Start

Thank you for purchasing The Bouncer Bluetooth Speaker! Enjoy your music wirelessly from
any smartphone, tablet, laptop, or other Bluetooth enabled device. Connect with
non-Bluetooth devices via an aux in connector port.

What is inside the box:

2

Meet The Bouncer:

Front Buttons

What to do:

Button 1 - Power / Mode

One click will turn The Bouncer on. While on, this button acts as a Mode
button.
When speaker is on, click once to switch between Bluetooth and Aux mode.
Red light indicates power is on.
Hold down this button for up to 5 seconds to turn off the speaker.

Button 2 - Call Button

When receiving a call, one click will answer the call and click again to end the
call.
The Blue indicator light on button.

Button 2 – Blue Indicator

Light

There is a blue indicator light that tells us when The Bouncer is in Bluetooth
mode.
When the blue light is blinking slowly, the speaker is in Bluetooth pairing
mode and ready to connect to a Bluetooth device.
If the blue light is not blinking and remains steady, the speaker is connected to
a Bluetooth device and is ready to play.
If the blue light is off, the speaker is in Aux mode.

Button 3 - Volume Control

Use your own USB cord for charging your mobile and Bluetooth devices while
playing music.

1 2 3

3