We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
A
C
F
T
S
I
I
O
T
A
S
30
G
DAY
U
E
A
T
R
N
A
W
T
O
D
Y
E
E
T
I
M
I
L
JBUDS AIR
EARBUDS
A
B
S
.
E
S
D
.
U
C
U
S
T
O
M
U
E
S
R
FIRST TIME SETUP: BLUETOOTH PAIRING
YOUR SATISFACTION IS GUARANTEED
N
You may exchange or return merchandise within 30 days of the purchase date. Please return the item to
E
the location you purchased it. If your item has been opened or used, restrictions may apply.
YOUR WARRANTY
A
R
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
T
R
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact.
O
P
P
AUTO-CONNECTING EARBUDS
1
Press and hold 3+ seconds on both buttons.
White lights will flash to indicate earbuds
are automatically pairing to each other.
CONNECTING TO BLUETOOTH
3
Select “JLab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights
CONNECTING TO BLUETOOTH
2
Once earbuds pair, the right earbud will flash blue and white
indicating the earbuds are ready to pair to your Bluetooth device.
Left earbud will be solid white.
will indicate you are connected. You will now be ready to use your JBuds Air.
Settings
Bluetooth
Settings
Bluetooth
JLab JBuds Air
PAIRING NEW / ADDITIONAL BLUETOOTH DEVICES:
When earbuds are powered off, press and hold Right Earbud button 10+ seconds. The earbud will flash blue and white
indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds.
ACCESSORIES
3 GEL TIP
SIZES
2 CUSH
FINS™
USB CABLE
CHARGING
CASE
BUTTON FUNCTIONS
LEFT
EARBUD
TURN ON / OFF:
Press & hold 5+ seconds.
VOLUME DOWN: 1 click.
PLAY / PAUSE: 2 clicks.
TRACK BACK:
Press & hold 1+ second.
RIGHT
EARBUD
TURN ON / OFF:
Press & hold 5+ seconds.
VOLUME UP: 1 click.
ANSWER: 1 click. HANGUP: 2 clicks.
REJECT INCOMING CALLS:
Press & hold 1+ second.
SIRI (iOS) or “OK GOOGLE” (ANDROID):
2 clicks.
TRACK FORWARD:
Press & hold 1+ seconds.
VOICE PROMPTS
“Hello”: Power ON
“Earbuds joined”:
Earbuds paired to each other
“Ready to Pair”: JBuds Air are
ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-75%
“Battery Medium”: 75-25%
“Low Battery”: Less than 25%
When power decreases to 10%,
“Low Battery” will play
“Goodbye”: Power OFF
EQUALIZER MODES
Click either the right or left earbud 3 times for different EQ settings (JBuds Air will cycle 3 EQ settings).
CHARGING EARBUDS
The left and right earbud need to
match the corresponding L and R
letters on the charging case for
proper charging and connection.
Placing the earbuds in the case will
auto power off the earbuds and
start charging.
Solid blue lights on the earbuds
will indicate charging and will turn
off after earbuds are fully charged.
Case will show blinking blue lights
while charging.
JLab SIGNATURE
JLab C3™ signature
sound with amplified
bass and vocals
LEFT
EARBUD
BALANCED
Even sound with
no additional
enhancements
RIGHT
EARBUD
BASS BOOST
Amplified bass
and sub-bass
Removing the earbuds from the case will turn on
and auto connect to your device for next use.
CHARGING CASE
Connect the JBuds Air to computer
or USB 5V output device.
LEDs pulse white when charging and
turn solid white when fully charged.
OR
FITTING
Try the optional Cush Fins and all
ear tips for best fit and proper seal.
CUSH FIN
EAR TIP
Hold the earbud
1
vertical to the ear.
Twist in the ear
2
canal to lock in.
TROUBLESHOOTING
CAN YOU HEAR MUSIC FROM THE RIGHT EARBUD BUT NOT THE LEFT?
CONNECT/RECONNECT THE LEFT AND RIGHT EARBUDS
If the right earbud is working but no sound is coming out of the left, follow these steps to pair the two earbuds together.
Turn Bluetooth off on your
1
device.
Turn both earbuds off (by
pressing and holding each
earbud button until voice
prompt says ‘good bye’
or you see no lights).
Settings
Bluetooth
When earbuds are off, press and
2
hold 15+ seconds on the RIGHT
earbud button.
While holding, earbud will flash
blue and white.
Release when earbud flashes white.
Repeat process with
3
LEFT earbud: Press and
hold 15+ seconds on
earbud button.
Release when earbud is
solid white. Once earbuds
connect, the right earbud
will flash blue and white
indicating it is ready to
connect to Bluetooth.
Left earbud will be
solid white.
Note: To avoid having to reconnect the earbuds again, make sure you return the earbuds to the correct spot in the case.
See Charging Earbuds.
ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port.
Turn your device Bluetooth
4
back on.
Select “JLab JBuds Air”
to connect.
Settings
Bluetooth
JLab JBuds Air
Microphone covered
Microphone open
QUICK TIPS WARNING
• The Bluetooth connection is established from the right earbud.
For most stable connection, keep the device near right hand side
or in right pocket.
Fully dry off the earbuds before
putting in the charging case to
avoid any damage to the case.
• When receiving/taking calls, only the right earbud will accept and
play from your mobile device. The left earbud will mute during calls
and continue playback after call ends.
• If you prefer to wear only one earbud, you must wear the right earbud.
WARM-UP YOUR HEADPHONES
Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach
optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone
driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and
frequency sweeps to achieve this.
Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play.
Or access the burn-in method at: jlabaudio.com/burnin
The earbuds are sweat/water
resistant but the case is not.
CAUTIONS
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume
or discontinuing use temporarily.
• If you experience regular discomfort while using this product,
discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair
of sunglasses and keep them in safe location when not in use.
JLABAUDIO.COM
Loading...