We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
W
T
O
D
Y
E
E
T
I
M
I
L
W
A
T
#
S
GO WORK
HEADSET
U
P
P
BLUETOOTH PAIRING
A
R
Y
T
R
N
R
A
M
J
L
A
A
E
B
M
A
E
T
O
T
R
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com
or visit jlab.com/contact
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
Turn on Bluetooth in
1
your device settings.
Settings
Bluetooth
Press and hold button
for 8 seconds. Release.
Lights will flash blue/red.
MULTIPOINT (CONNECT 2 DEVICES SIMULTANEOUSLY)
Once FIRST device is connected,
1
turn off Bluetooth in device
settings. GO Work will auto
enter Bluetooth Pairing.
Enter your SECOND device
Bluetooth settings and connect
to GO Work.
Select “JLab GO Work” in your
32
device settings to connect.
Settings
Bluetooth
JLab GO Work
Enter your FIRST device settings.
32
Turn on Bluetooth and reconnect
to GO Work.
Settings
Bluetooth
JLab GO Work Connected
Settings
Bluetooth
JLab GO Work Connect
JLab GO Work
For more info and troubleshooting on MULTIPOINT visit: JLAB.COM/MULTIPOINT
BUTTON FUNCTIONS
VOLUME UP: Press once
TRACK FORWARD:
Press and hold 2+ seconds
VOLUME DOWN: Press once
TRACK BACKWARD:
Press and hold 2+ seconds
SWITCH EQ VOICE / MUSIC:
Press and hold both buttons
simultaneously
BOOM MICROPHONE
can rotate to left or right side
POWER ON/OFF:
Press and hold 2+ seconds
PLAY/PAUSE/ANSWER/HANG UP CALLS:
Press once
REJECT INCOMING CALL:
Press and hold 1+ second
ACTIVATE SIRI (iOS) OR “OK GOOGLE”
(ANDROID): Press twice
HEAR YOURSELF ON/OFF:
Triple Press (when on call)
BLUETOOTH PAIRING:
See Bluetooth Pairing.
CHARGING
Connect to computer or USB 5v 1A (or less) output device.
Note:
GO Work can simultaneously charge while Bluetooth is connected.
Power on and connect to device after charging occurs.
MUTE ONMUTE OFF
MICROPHONE
MUTE ON / OFF
AUX INPUT
GO Work can be used as a wired headset with AUX cable.
Note: The headset will still use a limited amount of battery for the
microphones to function.
CHARGING
OR
CAUTIONS
• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to
improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
JLAB.COM
Loading...