JK Audio RAMP2 Data Sheet
JK Audio
RemoteAmp Two
STEREO HEADPHONE AMPLIFIER
FEATURESFEATURES
XLR Line level Input
•
JK Audio combines professional audio electronics in a rugged
new belt pack design.
3.5 mm Stereo Line Input Jack
•
3.5 mm Earpiece Jack
•
¼” Stereo Headphone Jack
•
Compatible with Party Line
•
Intercoms
>20 Hours on one 9 Volt Battery
•
RemoteAmp Two provides a listen only connection for mono IFB
or full bandwidth stereo music listening. Separate volume controls
for the XLR and 3.5 mm line input jacks allow a simple mix of
mono and stereo sources. The XLR line level input accepts either
a balanced mono signal, or a party line intercom feed (listen-only).
The ½ watt, ¼” stereo headphone jack will cut through any crowd
noise. Connect an IFB earpiece to the 3.5 mm earpiece jack for
operation.
JK Audio
www.jkaudio.com ⁄ 1311 East 6th Street Sandwich, IL 60548 USA ⁄ Phone: [815] 786.2929 ⁄ Toll Free: [800] 552.8346
Copyright © 2008 JK Audio, Inc.
JK Audio
XLR Line
Input
3.5 mm
earpiece jack
1/4” Headphone
3.5 mm line input
RemoteAmp Two
STEREO HEADPHONE AMPLIFIER
BACK VIEW
www.jkaudio.com ⁄ 1311 East 6th Street Sandwich, IL 60548 USA ⁄ Phone: [815] 786.2929 ⁄ Toll Free: [800] 552.8346
Specications
Impedance:
Level
(Line):
Frequency
Response:
20Hz – 20 kHz Size:
Input
Female XLR
Microphone
20k ohms 20 k ohms 100 ohms 8 ohms
(0 dBu nom)
Copyright © 2008 JK Audio, Inc.
3.5mm
Stereo
(-10 dBu) nom
Earpiece Jack
40 mW
Weight: 10 ounces (275 grams)
Output
Headphones
1/2 watt per
channel
4.7” x 3.75” x 1.65”
(12 x 9.5 x 4.2 cm)
1/4"
JK Audio
Loading...