JK Audio QT Data Sheet

QuickTap

QuickTap

Telephone Handset Tap

Product Overview

Connect the QuickTap between your telephone and handset for quick access to audio from any
telephone.

Simply unplug the handset coily cord from the base of your telephone and plug it directly into the
QuickTap. Then, using the supplied cable, connect the QuickTap to the base of the telephone. Now
connect your audio equipment or powered speaker to the audio output jack. This jack contains a nice
mix of both sides of the conversation, as well as the tones being pressed on the keypad.

The QuickTap does not work with cellular telephones or any telephone with a keypad in the handset.

*Works with analog, digital, PBX, and ISDN telephones

*1/8” mono audio out

*Use the QuickTap to get audio into a sound card or tape deck

*Get presentation quality audio using a powered speaker or PA system

*No battery or AC adapter needed

*Durable diecast aluminum construction

JK Audio

Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com

QuickTap

QuickTap

Telephone Handset Tap

Isolation

Transformer

1/8“

Output

JK Audio, Inc.

QuickTap

Block Diagram

4/4/00 - WR

Handset Jack
from Handset

Specifications

Line Output: 1/8” (3.5mm) mono, 600 ohms, 100 mV RMS (-16 dBm nom)
Size: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm)
Weight: 3.4 ounces

Handset Jack

to Phone

JK Audio

Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com