JK Audio Guest Module 1 User Manual

Guest Module 1

REMOTE KEYPAD

User Guide

JK Audio

™

Welcome

Contents

Thank You

Thank you for purchasing the JK Audio
Guest Module 1 Remote Keypad.
Please read this guide for instructions
on setting up and using your new
product.

Getting Assistance

If you have technical or application
questions:

In the US & Canada, call us toll free at:

800-552-8346

All other countries dial: 815-786-2929
(M-F 8:30-5:00pm Central Time Zone)

Email us at: [e-mail]

Or, check out our FAQ section
for answers to common questions.

Guest Module 1 Remote Keypad Contents

ii

Limited Warranty

Guest Module 1 is covered by a 2
year warranty to be free from defective
workmanship and materials. To obtain
service, contact JK Audio by phone
or email for return authorization.
Once authorized, you will carefully
pack and ship the faulty product and
all accessories to us. You will pay
for shipping to us and we will pay for
return back to you.

This warranty does not cover
damages due to accident, weather,

re, ood, earthquake, misuse,
unauthorized repairs or modications,

or damages occurred in shipping, only
defective workmanship or materials.

THERE ARE NO EXPRESSED OR IMPLIED
WARRANTIES WHICH EXTEND BEYOND
THE WARRANTY HERE MADE.

Overview 1

Using Guest Module 1 2

Technical Information 3

iiiii

Features Introducing the Guest Module 1.

Compatible with Broadcast Host,
innkeeper LTD, and innkeeper 1x/1rx

DTMF keypad

Keypad disable switch

Guest Module 1 Remote Keypad Overview

iv

Call Button

Drop Button

Ring / Call LED

Guest Module 1 gives you remote access to the on-hook / off-hook and dial
features of the Innkeeper 1, 1r, 1x,1rx or Broadcast Host digital hybrids.

This little time-saver gives you call control you simply can't get with an auxiliary
telephone and a couple of switches. An 8 pin RJ45 modular cable provides
remote power so there is no need for batteries or an external power pack. The

Call button will icker when a call comes in. Press this button to answer or place

a call. The button will stay lit when a call is present. When you dial on air, the
tones go out on the line, and do not come back mixed with the dial tone or caller
signal.

Overview

1

Using Guest Module 1 Technical Information

Getting Connected

Connect Guest Module 1 to your
JK Audio digital hybrid using an 8
pin RJ45 modular cable. This cable
provides remote power so there is
no need for batteries or an external
power pack. We have provided a 25
foot cable to cover most installations.
If you need a custom length cable, be
sure to purchase a cable wired so that
the wire on pin 1 of each connector is
the same color (pin 1 = pin 1). Data
cables are usually wired pin 1 to pin 1,
but telephone cables are usually wired
pin 1 to pin 8.

Guest Module 1 Remote Keypad Technical Information

2

Operating

The Call button will icker when a call

comes in. Press this button to answer
or place a call. The button will stay lit
when a call is present. When you dial
on-air, the tones go out on the line,
and do not come back mixed with
the dial tone or caller signal. Guest
Module 1 was designed exclusively for
JK Audio Digital Hybrids.

RJ-45 Modular Pinout:

Pin Description

1) Ground

2) Call / Drop Control

3) Ring / OH LED

4) DTMF Output

5) +5 VDC

6) Reserved

7) Reserved

8) Reserved

Dimensions

Size 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm)

Weight 11 oz (300 g)

Maximum cable length 50 feet.

3

Guest Module 1

REMOTE KEYPAD

User Guide Version 3/13

JK Audio, Inc.
1311 E 6th St.
Sandwich, IL 60548
United States
Telephone: [phone]
Toll Free: 1.800.jkaudio
Fax: [phone]
www.jkaudio.com

™

JK Audio