JK Audio Daptor Three User Manual

Warranty
Daptor Three is covered by a 2-year warranty to be free from defective workmanship and materials. In the event that the Daptor Three needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground. No free repairs will be made if the defect was caused by misuse, weather conditions, or other cause, except for defective workmanship or materials. THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTY HERE MADE.
Daptor Three
Daptor Three
Daptor ThreeDaptor Three
Wireless Audio Interface
10/09
JK Audio, Inc. 1311 E 6th Street, Sandwich, IL 60548 USA
Voice: (815) 786-2929 Toll Free: 800-JK-Audio Fax: 815-786-8502
info@jkaudio.com www.jkaudio.com
Copyright © 2009 JK Audio, Inc. All rights reserved.
User Guide
JK Audio
Introduction
FCC-B Part 15 Compliance
Daptor Three is a simple, professional audio interface using Blue­tooth* Wireless Technology. This device allows balanced and un-
balanced connections to your cell phone. Daptor Three connects to your cell phone like any other Bluetooth Wireless Technology enabled headset. It will also connect to any other product, such as a laptop, that allows wireless headset connections.
With the latest firmware release, Daptor Three can now be set to function as a Master device, sending stereo audio to other devices that support the A2DP profile.
There are many profiles that may be used for Bluetooth communi­cation. Daptor Three is compatible with these three typically used in cell phones and headsets:
A2DP (Advanced Audio Distribution Profile) Headphone mode, used for stereo music
streaming. 30-20 kHz stereo, receive only, headphone mode 30-17 kHz stereo, master mode transmit
Headset Facilitates mono, full-duplex audio between two
paired devices. 300-3.4 kHz mono, both directions
Hands-Free Similar to Headset profile but allows the receiving
device more control over the call such as volume,
accept/reject/end a call.
3.4 kHz mono, both directions
Any Questions?
Before you pick up the phone... Please thumb through the rest of this manual. You might find those deep technical questions are covered on later pages.
This device has been tested and found to comply with the lim­its for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protec­tion against harmful interference when the equipment is oper­ated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not in­stalled and used in accordance with the instruction manual, may cause harmful interference to radio communication. Op­eration of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by JK Audio can void the user's authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The internal antennas used for this mobile transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
* The Bluetooth word mark and logos are owned by the Blue- tooth SIG, Inc. and any use of such marks by JK Audio, Inc. is un­der license. Other trademarks and trade names are those of their respective owners.
2
11
Loading...
+ 4 hidden pages