JK Audio DAP2 Data Sheet

Daptor Two

Daptor Two

Wireless Telephone Adapter

Product Overview

You can now use your existing audio equipment for remote
broadcasts from any location. Simply plug Daptor Two into the

2.5mm headset jack of any wireless cell phone that accepts a 3rd
party headset or earpiece. You can now send and receive audio
from your mixer or tape recorder through the cell phone. Your cell phone will recognize Daptor Two as
a headset which will disable the mic and speaker in the cell phone itself. You will need to use a
microphone and headphones connected to your mixer to allow conversation over your cell phone to
continue.

! Works with all wireless phones that accept generic

third party earpiece / headsets

! No battery or AC adapter needed
! Durable diecast aluminum construction

JK Audio

Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com

Daptor Two

Daptor Two

Wireless Telephone Adapter

JK Audio, Inc.

Daptor Two

Block Diagram

12/13/01 - WR

1/4“ TRS

Wireless

Jack

Specifications:

Headset

Emulator

Circuit

Limiter

Transformer

Transformer

(Disconnected

when 1/4" send

jack is used)

XLR

Send Jack

1/4"

Send Jack

1/4"

Receive

Jack

XLR

Receive

Jack

(Disconnected

when 1/4" receive

jack is used)

Inputs: XLR 600 ohms balanced, line level, 0 dBm max input

1/4" mono, unbalanced, line level, 0 dBm max input

Outputs: XLR 600 ohms balanced, mic level, -25 dBm avg output

1/4" mono, unbalanced, mic level, -25 dBm avg output
Interface Jack: 1/4” - 3 conductor - 36" cable provided (1/4" - 3 conductor to 2.5mm - 3 conductor)
Passive, no AC or battery power needed
Size: 4.5" x 3.2" x 1.3"

(11.4 x 8.2 x 3.3 cm)
Weight: 9 ounces

JK Audio

Telephone Interface Products
815-786-2929 1-800-JK-Audio www.jkaudio.com