User Guide
jjPlus CORP.
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Product Overview
Item
Quantity
QST015B wireless charger
1
QST015B associated tray
1
Cardboard (setup tool)
1
Magnet (setup tool)
3
Power adaptor
1
Manual
1
jjPlus QST015B is a Qi compatible wireless charger designed for charging mobile phones
through thin non-metallic solid materials such as wood, plastic, glass, and granite. It can
support 5W Qi BPP standard, and 7.5W Apple fast charging.
Packaging Contents
Installation guide
Define the desired charging area on a thin solid material. Put the magnet at the center of
the desired charging area.
Align the associated tray with the setup tool under the solid material.
Insert the charger onto the tray. So, the charging area of the charger is well within the
defined area on the thin solid material.
Connect the power adaptor to the wireless charger. The LED color should be blue and
blinking, which means the wireless charger is at normal standby mode. Place the mobile
phone in the center of the charging area, the phone will start charging.
Frequency
Magnetic field frequency: 100-148 KHz
jjPlus CORP.
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installatio n.
This equipment generates, uses and can radiate radio frequency energy and, if not inst alled
and used in accordance with the instructions, may cause harmful interference t o radio
communications. However, there is no guarantee that interfer enc e will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television r eception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not express ly
approved by the party responsible for compliance could void the user's authority to operate
this equipment. (Example - use only shielded interface cables when connecting t o computer
or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired opera tion.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including inter f erence that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil do it acc ept er tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
jjPlus CORP.
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Loading...