JJPlus JWX5556 User Manual

jjPlus CORP.
User Guide
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
jjPlus CORP.
Product Overview
The devices Mini PCI-e adapter cards contain an Atheros chip for Wireless LAN
applications. The mini PCI-e adapter cards support key security features like Wi-Fi
Protected Access (WPA), WPA2, WEP and 802.1x.
Typical application of the card is integration into other wireless products such as AP/ Router
which is used distance 20 cm away human body.
Packaging Contents
The mini PCI-e card package contains the following item(s):
1 x Wireless Mini PCI-e Adapter
Installation guide
Shut down the power of the platform
Align the Mini PCI-e adapter with the Mini PCI-e socket on the platform
Adjust and push down the Mini PCI-e adapter gently until the metal locking levers on the
Mini PCI-e socket is latched. (Please take note that the Mini PCI-e adapter can only fit in
one direction due to the keyed notch. Wrong orientation will cause improper installation
and may damage the Mini PCI-e socket)
Connect the antenna(s) on the mini PCI-e module
Reboot on the platform
Install drivers if necessary
Frequency
2412 ~ 2462 MHz
5180 ~ 5240MHz, 5745 ~ 5825MHz
Connector: Reverse U.FL PLUG
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
jjPlus CORP.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
FCC Caution
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
13F-3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Loading...
+ 4 hidden pages