JJPlus JE24UAG User Manual

Clipper

User Manual

High Power Wireless USB Adaptor

Version: 1.0

2009. Aug.

No part of this publication may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language or computer language, in
any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company.

This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.

The software and specifications are subject to change without notice. All right
reserved including all brand and product names mentioned in this manual are
trademarks and/or registered trademarks of their respective holders.

2

Index

1. Product Information ......................................................................................................................3

1.1 Introduction ................................................................................................................................ 3

1.2 Product Features ....................................................................................................................... 3

1.3 System Requirements .............................................................................................................. 3

1.4 Package Contents ..................................................................................................................... 4

2. Driver Installation and Configuration .........................................................................................5

2.1 Network Adaptor Installation ..................................................................................................... 5

2.2 Manage A Basic Network Connection ..................................................................................... 8

2.2 Introduction to the Wireless LAN Utility .................................................................................. 12

2.3 AP Mode Management Guide ................................................................................................ 18

3. Specification ............................................................................................................................... 21

1. Product Information

1.1 Introduction

The IEEE 802.11b/g wireless USB adaptor enables users to surf the wireless
network at 54Mbps in the 2.4GHz radio frequency. This adaptor is also downward
compatible to IEEE 802.11b wireless devices at a maximum 11Mbps data rate.
Someone may configure this adaptor either with ad-hoc mode to connect with
alternative 2.4GHz wireless computers or with infrastructure mode to connect to a
wireless AP or router for the internet access. This adaptor includes a convenient
utility for scanning available networks and saving preferred networks that users
usually connected with. Security encryption is configured via this utility as well.

1.2 Product Features

Thank you for purchasing this high-speed wireless network adaptor! This wireless
network adaptor supports the IEEE 802.11b/g wireless standards. With
easy-to-install USB 2.0 interface - a very common expansion port of computers –
plug this wireless network adaptor into any empty USB port of your computer, just
that simple!

 Main features

1. Complies with wireless IEEE 802.11b/g standards

2. High speed transfer rate up to 54Mbps

3. Supports USB 2.0/1.1/1.0 interface

4. Supports 64/128-bit WEP, WPA (TKIP with 802.1x), WPA2 (AES with IEEE

802.1x) for high security level

5. Operating system supports: Windows 98se/ME/2000/XP/Vista/Linux/MacOS
*Maximum performance may vary depending on network conditions and

environmental factors.

1.3 System Requirements

1. CPU: Pentium III 1G above or similar

2. Memory size: 256MB RAM

3. One CD-ROM drive

4. Hard disk: more than 100MB available space

5. One available USB 2.0 port (USB 1.0 port will largely degrade the
performance)

6. Operating system: Windows 98se/ME/2000/XP/Vista/Linux/MacOS

3

4

1.4 Package Contents

1. Clipper 802.11b/g USB adaptor x 1

2. USB Y-cable x 1

3. CD-ROM x 1 (driver and user manual)

4. Antenna x 1

2. Driver Installation and Configuration

2.1 Network Adaptor Installation

Please follow these instructions to install your new wireless network card:
Insert the USB cable into an empty USB 2.0 port of your computer after the

computer is switched on. Never use force to insert the cable. If there is difficulty
inserting the cable, flip it over and try again.

This autorun wizard can be run in Windows 2000/XP/Vista. The proce dures sh own
are for a Windows XP installation. You can install the Wireless Adapter using the
Setup Wizard on the CD-ROM included in the package. The wizard is an easy a nd
quick configuration tool for internet connection with step-by-step process.

When you start the Setup Wizard, you will get the following welcome screen.
Please choose the language to start the configuration. The wizard will guide you to
finish your network connection. We will not provide any instruction for the Setup
Wizard here.

5

6

1. Select the desired installation language in the auto-run menu window, and the
programs will appear. Please select the desired language and click ‘OK’.

2. The welcome window pops up. Click the ‘Next’ button to proceed.

3. Please wait while installation.