JJPlus JA24MPN User Manual

miniPCI Manual

1. Product Overview
This JA24MP series PCI adapter contains a Atheros AR2413/4 chip for IEEE

802.11b/g W ireless LAN.
Based on the latest industry standard Wi-Fi Certified IEEE 802.11b/g specifications,
the mini PCI
adapter supports key security features like Wi-Fi Protected Access (WPA), WPA2,
WEP and 802.1x.
You can find this miniPCI module that is seated inside the wireless products such as
the notebook
computers or any other devices containing Mini PCI socket.

2. Packaging Contents
The mini PCI module package contains the following item(s): 1 x Wireless Mini PCI
adapter

3. Installation guide
 Shut down the power of the device.
 Align the PCI adapter to the Mini PCI socket.
 Adjust and push down the PCI adapter gently until the metallocking levers aside
from the Mini
PCI socket is fastened. (Please take note that the PCI adapter can only fit in one
direction
due to the keyed notch. Wrong orientation will cause improper installation and may
damage the Mini PCI socket ! ).
 Connect the antenna(s) on the mini PCI module.
 Turn on the device could work properly.

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver
is connected.

-Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions
(1) This device may not cause harmful interference and
This device must accept any interference received, including interference that may
cause undesired operation

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Caution: Exposure to Radio Frequency Radiation.

To comply with FCC RF exposure compliance requirements, a separation distance of
at least 20 cm must be maintained between the antenna of this device and all persons.
This device must not be co-located or operating in conjunction with any other antenna
or transmitter
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user manual of the end
product. The user manual which is provided by OEM integrators for end users must
include the following information in a prominent location. “To comply with FCC