1
JJC WR-100 WIRELESS CONTROLLER
Thank you for purchasing JJC WR-100 series wireless controller. For the best performance, please
read this instruction carefully before use.
Remove the remote control socket cap of the camera.
Take out the JJC WR-100 wireless controller receiver and plug it into the remote control socket of the
camera.
Slide the function button in the W Mode. The receiver is active. Under this condition, the receiver can
receive the signal from the transmitter; the receiver consumes the power of the battery. User can uses
the Shutter button of the transmitter and Focus button to control the Camera’s shutter and Focus.
Press the transmitter’s shutter button to take a photo. Press the transmitter’s focus button to focus.
Slide the function button in the O Mode. The receiver is turnoff. Under this condition, the transmitter
can not active the receiver to control the camera. The receiver will not consume any power of the
battery. User can use the shutter button of the receiver to take photos. Press the shutter button
halfway to focus. Press it fully to take a photo.
Slide the function button in the L Mode and turn on the camera to BULB mode. Under this condition,
the transmitter opens the lens; Slid the function button in the O Mode, the transmitter closes the lens.
2
When the camera is under no-Bulb mode and taking the photo, the transmitter will lock the shutter
button, and the camera will implement continues shooting. Under L mode, the transmitter can not
control the receiver.
Operating range
Maximum operating range 100m. (The operating range may be obstructions or interference with other
electronic equipment to reduce the distance)
Charging
The WR-100 inbuilt High Capacity Li-ion battery. Take out the power adapter, plug it into the power
socket of the transmitter and then plug the power adapter to the power outlet. When the transmitter is
under charging, the light of transmitter is on. There are 5 lights, each light represent 20% of battery
power. When all of the lights are on, which mean the battery is full, please take off the power
adapter.
WR-100A compatible with Canon
EOS 5D EOS 1D EOS 1Ds EOS 1D Mark II EOS 1Ds Mark II
EOS 1Ds Mark II
Digital
EOS 1D Mark II N
Digital
EOS 1D Mark III EOS 1DS Mark III EOS 400D Digital
EOS 30D EOS 20D EOS 10D EOS D60 EOS D30
EOS 40D EOS 1V EOS 3 EOS D2000
WR-100B compatible with Nikon/ Kodak/ Fuji
D2H D1x D1h D1
D2x D100* D200 F5
D2Xs D300 D3
Nikon
F6 F100 F90 F90x
Kodak DCS-14n
Fuji Finepix S3pro Finepix S5pro
*MB-D100 Vertical Grip/Battery Holder Needed
WR-100C compatible with Canon/ Pentax/ Contax/ Samsung
K100D K110D K10D *ist DS2
K100D Super
*ist D *ist Ds *ist *ist DL
PENTAX
MZ-6 ZX-L MZ-L *ist DL2
645 N N1 NX
CONTAX
N Digital
Loading...