JJC RM-T1
Long range Infrared Remote Control Instruction
Design for SONY DSLR camera
Thank you for purchasing JJC RM-T1 long range Infrared Remote Control. For the best
performance, please read this instruction carefully before use.
Features:
The RM-T1 is a remote control made especially for the SONY DSLR camera provided a remote
sensor. You can operate the camera using the remote control.
z By operating the remote control, you can shoot images and play them back on a TV.*
Shooting the image
Playing back images
Enlarging or reducing the playback images
z The (Slide show) button easily starts/stops a slide show on a TV.*
z Once you connect the camera to a PictBridge printer, you can easily print images while viewing
them on the TV by pressing the PRINT button on the remote control.**
*These function only work when the camera is connected to a TV.
**This function only works when the camera is connected to an HDTV with HDMI cable.
To Replace the Battery:
1. The remote control is powered by two AAA batteries which are already included in.
2. Open the battery cover at the back of remote control.
3. Insert two fresh batteries, please ensure the batteries are putted into a correct direction.
Identifying the parts:
S
2S
DISP
MENU
PRINT
Shutter button
Shutter release in 2
seconds button
Histogram button
Display button
Index button
Rotate button
Playback button
Menu button
Print button
Slide show button
+/-
Scale up/down buttons
Delete button
Multi-selector
Notes:
With the exception of the 2S and S buttons, the buttons only work when the camera is connected to
a TV.
Shooting
Verify that the subject is visually in focus and press the S or 2S button.
S button
When the button is pressed, the shutter is released right away.
2S button
After you press the button, the shutter is released about two seconds later.
z For details about settings, refer to the camera's operating instructions.
z The other buttons are used when the camera is connected to a TV.
Viewing operation with the remote control by connecting the camera to a
TV
Connecting the camera to a TV with a video cable or an HDMI cable and turning to the playback
mode enable you to operate viewing using the remote control. Most of the buttons on the remote
control have the same functions as the buttons on the camera.
z For details, refer to the camera's Operating Instructions.
z The S button, 2S button and PRINT button are used when shooting the image the camera is
connected to a PictBridge printer.
Slide show
The slide show button on the remote control easily starts/stops a slide show. During a slide
show, the following operations are available from the remote control.
z Displaying the previous/next image with
z Pausing/playing back the slide show with .
Printing
Once you connect the camera to an HDTV with an HDMI cable, you can easily print images while
viewing them on the TV.
1. Connect the camera to a TV.
2. Connect the camera to a PictBridge compliant printer.
3. Display the image you want to print.
4. Press the PRINT button on the remote control.
z For details about printing, refer to the camera's Operating Instructions.
Specification:
• Battery Type: 2x 1.5V AAA lithium battery
• Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
• Storage temperature: -20°C to +60 °C (-4 °F to 140°F)
• Operation distance: 1cm-15meters
• Mass: 30g
• Dimensions: Approx. 83.5 X 48.0 X 19.2 mm
• RM-T1 replaces SONY RMT-DSLR1 remote commander.
Attention:
• When the remote control is not in use over a long time, please remove the battery from the
remote control.
• Do not leave the remote control in places subject to extremely high temperatures.
• The operable range of the wireless controller will shorten under the following circumstance.
1. When strong light strikes the camera.
2. When the battery is weak.
Compatible with SONY Alpha Cameras
A230 A290 A330 A380
A390 A450 A500 A550
A560 A580 A700 A850
A900 NEX5/NEX5C
Printed in CHINA
Date:2010-09-30
NO.695029150001
Copyright of
JJC Technology
WWW.JJC.CC
Loading...