JJC RM-S2 User Manual
JJC
JJC
JJC
JJC RM-
RM-
RM-
RM- S2
S2
S2
S2
Long
Long
Long
Long range
range
range
range Infrared
Infrared
Infrared
Infrared Remote
Design
Design
Design
Design for
for
for
for FUJIFILM
Remote
Remote
Remote Control
FUJIFILM
FUJIFILM
FUJIFILM FINEPIX
Control
Control
Control Instruction
FINEPIX
FINEPIX
FINEPIX S2000HD
Instruction
Instruction
Instruction
S2000HD
S2000HD
S2000HD
JJC
RM-
Thank you very much for purchas ing a JJC
best performance, read these instructions carefully before use and keep them handy for your
reference.
�
To
�
�
� To
Replace
To
Replace
To Replace
Replace the
1. The remote control is powered by CR-2025 battery which is already included in.
2. Open the battery holder at the bottom of remote control.
3. Insert a fresh battery , please ensure the battery is put into a correct direction.
4. Replaces the battery holder .
the
Battery
the
Battery
the Battery
Battery
JJC
JJC RM-
S2
RM-
S2
RM- S2
S2 long range Infrared Remote Control. For the
�
To
use
RM-
S2
�
To
use
�
�
To
To
1. Mount the camera on a tripod (recommended) or place the camera on a stable, level surface.
2. Aim the transmitter on the remote control at the infrared receiver on the camera (usually within
+/- 20 degree of the lens axis, from the left to the right and from the top to the bottom) and
press the shutter-release button on the remote control (when us ing the remote outdoors,
make sure that the subject is not backlit and that the line of site between the transmitter and
the infrared receiver is not blocked by the lens or other obstacles).
3. How the camera focuses and shoots depends on the option selected for your camera's
custom setting. For further information, check your camera's manual.
4. Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the
front end of the remote control when operating.
�
To
�
To
�
�
To
To
Connect your FUJIFILM FinePix S2000HD to a TV using the A/V cable to enjoy images that you
have take in high definition.
camera from a remote position.
RM-
use
use RM-
RM- S2
use
RM-
use
RM-
use
use RM-
RM- S2
Remote
S2
Remote
S2 Remote
Remote Control
S2
Remote
S2
Remote
S2 Remote
Remote Control
Control
Control
Control to
Control
Control
Control with
You
can also use the wireless remote control to comfortably control the
to
take
to
take
to take
take photo
with
with
with TV
photo
photo
photo
TV
TV
TV
Connecting
Connecting
Connecting
Connecting the
1. Turn the camera's power OFF
2. Open the camera's terminal cover and connect the A/V cable into A/V
end of the cable into the TV A/V input.
Operating
Operating
Operating
Operating the
1. Aim the transmitter on the wireless remote control at the receiver on the front of the camera.
2. Excluding the shutter button, the remote control's operational buttons perform the same
actions as those on the FUJIFILM FinePix S2000HD.
3. There is no function for pressing the shutter button half-way down. An image is taken by
pushing the shutter button down completely.
�
Specification
�
Specification
�
� Specification
Specification
• Battery Type: 1X CR-2025
• Operating temperature: 5 ° C to 40 ° C (40 ° F to 105 ° F).
• Operation distance: 1cm-15meters.
• Weight:
• Size: 56 X 3 4 X 6 mm
• RM- S2 replaces FUJIFILM RC-S2 wireless remote control.
• RM-S2 compatibles with FUJIFILM PINEPIX S2000HD.
the
camera
the
camera
the camera
camera
the
Wireless
the
Wireless
the Wireless
Wireless Remote
11
g
Remote
Remote
Remote Control
Control
Control
Control
OUT.
Insert the other
* A/V cable is a supplied accessory of S2000HD camera.
Copyright
Copyright
Copyright
Copyright of
WWW.JJC.CC
WWW.JJC.CC
WWW.JJC.CC
WWW.JJC.CC
of
of
of JJC Technology
Technology
Technology
Technology
Loading...