JJC JM Series Wireless Controller
Thank you for purchasing JJC JM series wireless controller. For the best performance,
please read this instruction carefully before using.
Package Contains:
z JM transmitter x1
z JM receiver x1
z CR-2 battery x1
z 23A battery x1
z Connecting cord x1
z Manual Instruction x1
Transmitter
23A battery
Parts of Transmitter and Receiver.
Receiver
Connecting cord
① Battery Cover
② Power Switch
③ Shutter Button
④ Status LED
⑤ Remote Socket
CR-2 Lithium battery
Hot Shoe Converter
(For SONY/ MINOLTA model only)
Replaces batteries:
① Status LED
② Shutter Button
③ Model dial
① The JM receiver is powered by one
piece of CR-2 battery and the transmitter is
powered by one 23A battery which are
already included in package.
Code Setting:
② Remove the battery cover at the back of
JM receiver.
③Insert the fresh battery, please ensure
the batteries are putted into a correct
direction.
④Close the battery cover
Please make sure the receiver and the
transmitter are same code setting.
There are 16 codes available.
Description:
JJC JM Series Radio Frequency Wireless Shutter is designed for most of DSLR and SLR
cameras that have a remote socket on the camera body. JM Wireless Shutter, allows you
to easily create compelling close-ups from a safe and secure "line-of-sight" distance of up
to 30meters (100feet). The JM receiver simply attaches to a compatible camera's
accessory shoe and connects to the camera's remote socket with the supplied receiver
cable. The receiver is powered by 1X CR-2 lithium battery and the transmitter is powered
by 1X 23A battery. JM transmitter can trigger the camera shutter(instantly, 3 seconds
delay and long exposures) over receiver up to 30 meters.
Features:
JM Receiver:
• Battery Type: 1x CR-2 lithium battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Net Weight Approximately: 19 g
• Dimensions: 47.5 X 38.0 X 21.9 mm
JM Transmitter:
• Battery Type: 1x 23A battery.
• Operating temperature: 5 °C to 40 °C (40 °F to 105 °F).
• Net Weight Approximately: 18 g
• Dimensions: 81.90 X 27.3 X 14.5 mm
Notice to Usage:
1. Turn OFF the power of the camera before plug the connecting cord into the camera
remote socket.
2. Please make sure the transmitter and receiver are the same code setting.
3. Plug the connecting cord into the receiver remote socket and the camera remote
socket.
4. Turn ON the power of the receiver and the camera.
5. Instant / Delay / Bulb shutter
z Shift the mode dial of the transmitter to 3S section and then press the shutter
button, the camera will take a picture after 3 seconds count down.
z Shift mode dial to 0S section and then press the shutter button, the camera will
take a picture instantly.
z Shift the mode dial to 0S section and then press the shutter button of the
transmitter for 5 seconds, the receiver will lock the shutter for BULB. To release
the shutter look, press the shutter button of the transmitter again, the receiver will
unlock the shutter.
z Half press shutter button of transmitter for camera focus.
z Complete press shutter button of transmitter for camera shutter.
Copyright of
WWW.JJC.CC
JJC Technology
Loading...