Model: JM-II
Wireless Remote Controller
English Manual Instruction
Thank you for purchasing JJC JM-II series wireless remote controller. For the best
performance, please read this instruction carefully before using. You must read it
throughly and fully understand this manual to avoid improper operation lead to damage of
the product.
JJC JM-II Series Radio Frequency Wireless Shutter is designed for most DSLR and
SLR cameras that have a remote socket on the camera body. The system works at a
433MHZ frequency and has 16 available channels. What’s more, this wireless remote
system adopts a technology to allow the transmitter trigger the receiver without direct line
of sight up to 30 meters. The JM-II receiver simply attaches to a compatible camera's
accessory shoe, then just connect the supplied JJC receiver cable to the camera's remote
socket. The receiver is powered by one piece of CR-2 lithium battery while the transmitter
is powered by one piece of 23A battery. JM-II transmitter can trigger the camera shutter at
five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous
shots and bulb shot. The receiver has a 1/4"-20 tripod mount socket on the bottom, so you
can even mount the receiver onto a tripod. Most important, our JM-II transmitter is able to
fire multiple receivers at the same time. All these features make it good for eliminate
camera shake in long exposure photography.
Package Contains
JM II transmitter x 1
JM II receiver x 1
CR-2 battery x 1
23A battery x 1
Connecting cord x 1
This manual instruction x 1
Features
JM Receiver:
Battery type: CR-2 3V lithium battery × 1
Operating temperature: 5 °C to 40 °C (40 °F to 105 °F)
Net weight : Approx 19g
Dimensions: 48 × 38 × 29mm (with cold shoe mount)
JM Transmitter:
Battery type: 23A 12V battery x 1
Operating temperature: 5 °C to 40 °C (40 °F to 105 °F)
Net weight : Approx 18g
Dimensions: 82 × 27 × 14.7mm
Identify the Transmitter and Receiver
Transmitter
①Status LED
②Shutter button
③Mode dial
④Antenna head (can be pull out)
⑤Channel setting switch
⑥Battery cover
Receiver
① Left status LED
② Right status LED
③ Shutter button
④ Battery cover
⑤ Channel setting switch
⑥ 1/4"-20 tripod mount socket
⑦ Cold shoe mount
⑧ Lock nut
① ON/OFF switch
② Remote socket
Loading...