
Commercial in Confidence
Operational Logic of HM160
Page 1 Rev. 3

Engineering Specification
Change Record
Rev. No. Change Date Name
Revision No.: 0.1 Date: Apr 12, 2013
Page 2 Rev. 3

RF Radiation Information
RF Radiation Profile
Your radio is designed and tested to comply with a number of national a nd international standards
and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy.
This radio complies with the IEEE and ICNIRP exposure limit s for occupational/controlled RF
exposure environment at operating duty factors of up to 50% transmitting and is authorized by the
FCC for occu pational us e only. In terms of measuring RF energy for compliance with th e FCC
exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during
talking in PTT mode), not w hen it is receiving (listening) or in standby mode.
The device complies with SAR and/or RF field strength limits of RSS-102 requirement
RF Radiation Safety
In order to ensure user health, experts from relevant industries including science, engineering,
medicine and health work with international organizations to develop standards for safe exposure to
RF radiation. These standards consist of:
¾ United States Federal Communications Commiss ion, Code of Federal Regulations; 47CFR part
2 sub-part J;
¾ American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992;
¾ Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999;
¾ International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should
meet the requirements set forth in the above standards before they can be marketed in the U.S, and
the manufacturer shall post a RF label on the product to inform users of ope rational instructions, so
as to enhance their occupational health against expos ure to RF energy.
Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasona ble protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help. Note:“Changes or
Page 3 Rev. 3

modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.”
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the ess ential requirements
and other relevant provisions of the Directive 1999/5/EC. Please note that the above information is
applicable to EU countries only.
Page 4 Rev. 3

TABLE OF CON TENT
A. KEY FUNCTION ........................................................... ..... ... ... ..... ... ..... ... ..... ... .. ...... .. ...... ..........6
POWER ON/OFF (HARDWARE) ..............................................................................................7
B.1
B.2
VOLUME CONTROL (HARDWARE)........................................................................................... 7
SQUELCH (HARDWARE)........................................................................................................... 7
B.3
UP/DOWN............................................................................................................................... 7
B.4
16/9 CHANNEL......................................................................................错误!未定义书签。6
B.5
HI/LO TX POWER ....................................................................................................................8
B.6
WX............................................................................................................................................ 8
B.7
BAND.......................................................................................................................................9
B.8
B.9
SCAN....................................................................................................................................... 10
MEMORY OPEARTION.................................................................................................. 11
B.10
WATCH................................................................................................................................. 11
B.11
B.12
BACKLIGHT..........................................................................................................................13
KEYLOCK............................................................................................................................. 13
B.13
C. SPECIAL FUNCTION OPERATION............................................ ...........................................13
TX TIME OUT ........................................................................................................................ 13
C.1
POWER SAVE MODE ..............................................................................................................13
C.2
DINSTICT TONE...................................................................................................................... 13
C.3
RX STRENGTH INDICATOR....................................................................错误!未定义书签。
C.4
TX INDICATOR....................................................................................................................... 13
C.5
D. EUROPEAN KEY OPERATION.............................................. ................................................14
PROGRAMMING ATIS ID......................................................................................................14
D1.
D2.
* OPEARTION (BAND)............................................................................................................14
Page 5 Rev. 3

A. KEY FUNCTION(HM160)
Key Short Press ( < 3 sec ) Long Press ( > 3 sec )
HI/Lo /Lock TX Power Hi/Low Key Lock
16/9 CH 16 CH09
DW/TriW Dual Watch mode Tri Watch mode
WX/BAND Weather Channel UIC band
SCAN All Scan/all memory Scan Priority all/memory Scan
MEM MEMORY Mode Save/Delete Memory Channel
Up/Down Channel/ Setting Up/Down Channel Fast up/Fast down
UIC UIC
Sql Sql Set
Rotary Key
Volume Power ON / OFF
Adjust the volume level
B.Key arrangement (HM160)
PTT CH/WX/UIC UP UIC
SQL 16/9 DOWN HI/LO/LOCK
SCAN MEM DW/TRIW
Note: In Europe version, CH/WX/UIC key will be changed to CH/PRIV/UIC key
HM160 LCD
Page 6 Rev. 3