Jinke Hanlin V8 User Manual

（V8 Model）

Tianjin Jinke Electronics Co.,LTD.
Address: No.15,Keyandong Road, Nankai District,

Tianjin, PRChina
Postal Code: 300192
Tel.:[phone]
Fax:[phone]
Website:www.jinke.com.cn
E-mail:[e-mail]

[e-mail]

Version: 05/2006 3rd version

Safety Notice

Please strictly abide the rules, otherwise the danger will happen. For safely and efficiently use
the product, you should read the following information before firstly use the product.

Do not put the product under the hot sunshine and use or put it in the extra high and low
temperature environment. If you do these, that will cause the distortion of the product and
damage of the electronic component and battery.

Do not put or use it in humidity environment. Do not let liquid immerge into the product,
affected with water and damp will cause the malfunction of operation of the internal circuit.

Put the product on a stable place, violently shake or fall off will cause the damage of the
product and its electronic component.

Do not heavily press the display or put heavy on the display, prevent the display from breaking
or hurting people.

Do not put the product in the dust, dirty place and the place full of erodent air.

Do not use chemical solvent to clean the surface of the product. Please use the soft cloth to
wipe up the dust from the surface of the screen or the cover. You can use a little distilled water
to erase the dirty on the screen or the cover.

Do not privately disassemble the product. Only the qualified maintenance man of our company
or authorized maintenance center can assemble the product.

Please pay attention to put the product or its fittings on the place, which the children cannot
reach.

Do not put the product near the magnetic field; prevent it from disturbing of the magnetic field.

Please use the authorized fittings, do not use unmatched components.

Copyright card:

※ Do not bend it, carefully protect the metal part of the card.

※ Keep the metal part clean, prevent it from dust or chemical articles.
※ For protecting the metal part, please avoid regularly pulling out the copyright card

from the product.

※ Do not put copyright card in extra high or low temperature environment.

Battery:

※ Do not use the rechargeable battery with damaged surface.
※ If battery leaks liquid, please clean the product and put the new battery. If the liquid

drops on your body, please carefully clean it.

※ Please properly dispose the old and waste batteries.

This product is CE approved.

Components Guide

p

N

umber key

Indicator

Display

Stylus Slot

Reset

Copyright Card

0~9

Shift

Zoom

Catalog

Opening knob

Select page

Rotation

Bookshelf

Page turning knob

Stylus

Port

Battery

Touch

anel

SD card slotEarphone jack

Buttons:
Number Key 0~9: you can input number under the select page performance; under the
bookshelf interface, press number 0 can enter into online help (The "DIC" folder of SD card
should contain help.wol file.) Under bookshelf and catalog interfaces, press the number key
(1~8) can select the corresponding item; under the text interface, long-press number 0 can shift
to different reading method, number 9 can reveal/conceal status bar and tip bar and the
performances of number (1-8) will be different according to different reading methods.(about
specific performances, please refer to tip bar.)
Bookshelf: Back to the current bookshelf from text/catalog interface; return to the previous
level bookshelf.
Page Turning Knob：Previous/next page turning, turning 5 pages per long-press.
Rotation: Text direction (Horizontal or vertical direction)
Zoom: Font zoom in/out under the text interface.
Catalog: After press the catalog key, the catalog of the current book will be displayed.