Page 1
Void After: June 2024
IAPMO RESEARCH AND TESTING, INC.
5001 E. Philadelphia Street, Ontario, CA 91761 • Phone (909) 472-4100 • Fax (909) 472-4244 • www.iapmort.org
CERTIFICATE OF LISTING
Issued To:
KINGERO SANITARY WARE CO., LTD.
EAST GUAYUAN ROAD NO.18 CHAOZHOU, GD 521031, GUANGDONG, CHINA
Product:
Water Closets with Dual Flush Feature
File Number: 11135
Eective Date: June 2019
IAPMO Research and Testing, Inc. is a product certication body which tests and inspects samples taken from the
supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable
codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as
well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO
Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
This certicate is not evidence of current listing. To verify listing status, visit the IAPMO R&T Product Listing Directory at pld.iapmo.org
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
Products are in compliance with the following standard(s)
ASME A112.19.2-2018/CSA B45.1-18
This listing period is based upon the last date of the month indicated on the Eective Date and Void After Date shown above. Any change in material, manufacturing process, marking or
design without having rst obtained the approval of the Product Certication Committee, or any evidence of non-compliance with applicable codes and standards or of inferior
workmanship, may be deemed sucient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specic written
permission of IAPMO Research and Testing, Inc. Any alteration of this certicate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
Page 1 of 4
Kingero
Page 2
IAPMO RESEARCH AND TESTING, INC.
CERTIFICATE OF LISTING
Issued To: KINGERO SANITARY WARE CO., LTD. Eective Date: June 2019
File Number: 11135
Product: Water Closets with Dual Flush Feature Void After: June 2024
This certicate is not evidence of current listing.To verify listing status, visit the IAPMO R&T Product Listing Directory at pld.iapmo.org
Identification:
Water Closets with Dual Flush Feature shall be marked with the manufacturer’s name or registered
trademark, or in the case of private labeling, the name of the customer for whom the fixture was
manufactured. Markings shall be permanent, legible, and visible after installation.
The model number of close-coupled water closets shall be marked on both the tank and the bowl.
Water closets with Dual Flush Feature shall be marked to identify the average water consumption, expressed
in litres and gallons per flush. The litre or gallon value may be stated first, at the manufacturer’s option. The
product shall be marked with the reduced flush volume and the designation ASME A112.19.14 to signify
compliance with this Standard. The location of this mark shall be determined by the manufacturer and is not
required to be permanent, but it shall be visible after installation. The label shall be intended for removal by
the occupant only, and this shall be so stated on the label.
Gravity flush tanks shall be marked with a water level mark or with the information necessary to determine the
water level in the tank needed to deliver the intended flush volume. This mark shall be applied to the ceramic
body of the tank, the tank liner, or the flush valve overflow tube. The vertical distance between the water level
mark and the lowest point of the tank overflow channel shall not exceed 38 mm (1.5 in).
Water closet tanks shall have a label indicating at least the following:
(a) the telephone number or contact information of a service department from which end-users can obtain
replacement parts;
(b) the serial or part number of the flush valve seal; and
(c) information on procuring replacement parts for maintaining the original flush volume.
All packaging shall be marked with the manufacturer’s name or registered trademark; or in case of private
labeling, the name of the customer for whom the fixture was manufactured and the model number. Packaging
shall be marked with the water consumption in gpf and Lpf.
Each fixture shall be marked with the cUPC® certification mark. In the case where the tank and the bowl are
sold separately, both shall have the certification mark.
Identification of flush mode options shall be depicted on the actuator. This identification shall be either by
graphic display or lettering, or shall be intuitively apparent.
Fixtures that require proprietary (i.e., non-standard) components, e.g., supply fittings, waste fittings, or water
closet seats, shall indicate, in the packaging or the accompanying literature, that such components are
provided by the manufacturer and shall identify the proper replacement parts.
Page 2 of 4
Kingero
Page 3
Fixtures that do not comply with one or more of the dimensional requirements of this Standard shall be
marked with an “N” to indicate the non-standard nature of the fixture.
Characteristics:
To be installed in accordance with the manufacturer's instructions, the latest edition of the Uniform Plumbing
Code, and the National Plumbing Code of Canada.
Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition
has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Page 3 of 4
Kingero
Page 4
Models
Floor Mount WC
Model Number Description
K-0507 one piece toilets, siphonic, dual flush
K-0510 one piece toilets, siphonic, dual flush
K-0707W wall hung toilet, rimless, dual flush
K-0708W wall hung toilet, rimless, dual flush
K-0318DF one piece toilet, siphonic, dual flush
K-0324DF one piece toilet, siphonic, dual flush
K-0328DF one piece toilet, siphonic, dual flush
K-0329DF one piece toilet, siphonic, dual flush
K-0331DF one piece toilet, siphonic, dual flush
K-0332DF one piece toilet, siphonic, dual flush
K-0335SDF one piece toilet, siphonic, dual flush
K-0336DF one piece toilet, siphonic, dual flush
K-0338DF one piece toilet, siphonic, dual flush
K-0339DF one piece toilet, siphonic, dual flush
K-0358DF one piece toilet, siphonic, dual flush
K-0382DF one piece toilet, siphonic, dual flush
K-0397DF one piece toilet, siphonic, dual flush
K-0398DF one piece toilet, siphonic, dual flush
IAPMO RESEARCH AND TESTING, INC.
CERTIFICATE OF LISTING
Issued To: KINGERO SANITARY WARE CO., LTD. Eective Date: June 2019
File Number: 11135
Product: Water Closets with Dual Flush Feature Void After: June 2024
This certicate is not evidence of current listing.To verify listing status, visit the IAPMO R&T Product Listing Directory at pld.iapmo.org
Page 3 of 4
Kingero
Loading...