Jiffy 70 Series Operating Manual

1

Jiffy 70 Series

Power Ice Drill

OPERATING MANUAL/PARTS GUIDE

This manual contains operating and safet y instructions for the Jiffy
70 Series Power Ice Drill. To receive the greatest possible
performance and satisfaction from your Jiffy Power Ice Drill, and to
reduce the risk of injury, it is important that you read and understand
the assembly, operating, maintenance, and safety instructions before
using your Jiffy Power Ice Drill. Contact your Jiffy dealer or
Feldmann Engineering if you do not understand any of the
instructions in this manual.

As with any power tool, safet y precautions must be observed with
the Jiffy Power Ice Drill to reduce the risk of personal injury.
Careless or improper use m ay cause serious injury and/or damage
to your Jiffy Power Ice Drill.

INDEX

General Information …………………….. 1
Warranty………………………………….. 1
General Safety Precautions ……………. 2
Pre-Use Procedure ……………………... 2
Assembly of Drill…………………………. 3
Oil & Fuel Recommendations…………… 3
To Mix Oil & Gasoline, Fuel Mix Chart…. 3
Fueling…………………………………….. 3
Check Before Starting Your Drill……….. 3
Starting Instructions……………………… 3
Operating/Stopping Instructions………… 4
Maintenance and Adjustments…………. 4
Service & Repair Information…………… 5
Diagram of Main Parts, Parts List……… 6

MANUFACTURER’S One Year Limited Warr an ty

(30 days for Commercial and/or Rental Use)
Feldmann Engineering & Manufacturing Co., Inc. warrants t he Jiffy

Power Ice Drill to be made of first quality mat erials and workm anship
and will, at its option, repair or re place any drill part thereof found to
be defective in such materials and workmanship if returned to the
factory, prepaid within one year from the date of purchase by the
original purchaser. Inbound and outbound transportation c harges are
paid by the purchaser. Feldmann Engineering assumes no
responsibility for damage caused by misuse, careless handling, or
where repairs were made or attempted by an unauthorized person.
The engine and its operation are covered by the engine
manufacturer’s warranty. For engine service or parts, contact your

local Tecumseh service outlet, phone
visit Tecumseh web

site www.tecumsehpower.com

1-800-558-5402, or

Page

Number

SERVICE & REP AIR INFO RMATION

For engine adjustments, repairs or warranty service not
covered in this manual, contact your nearest AUTHORIZED
TECUMSEH SERVICE OUTLET. They are listed in your
telephone book yellow pages under “Engines, Gasoline”. If
you cannot find an Authori zed Tecumseh Ser vice Outlet near
you, call

1-800-558-5402 to locate the Tecumseh outlets

nearest you, or visit the Tecumseh web site at

www.tecumsehpower.com.

warranty service, Jiff y ice drill proof of purc hase establishes
the date of sale and the start of the warranty period.

For non-engine related adjustments, repairs or warranty
service contact your nearest Authorized Jif fy Service Center
listed in the Jiff y Service Directory or call ( 920) 467-6167 for
locations near you, or visit our web site at

www.jiffyonice.com.

Manufactured by:
FELDMANN ENGINEERING &
MANUFACTURING CO., INC.
520 Forest Avenue
Sheboygan Falls WI 53085-2513
Phone: [phone]
FAX: [phone]
e-mail: [e-mail]

www.jiffyonice.com

Other products include: TurfVent Lawn Aeration Equipment, BADGER Earth
Augers

When requesting

Form #WM3071-06A (08/08)

2

GENERAL SAFETY PRECAUTIONS

To receive the greatest possible performance and s atisfaction from
your Jiffy Power Ice Drill, and to reduce the risk of injury, it is
important that you read and understand the assembly, operating,
maintenance, and safety instruct ions before using your Jiffy Power
Ice Drill. Contact your Jiffy dealer or Feldmann Engineering if you do
not understand any of the instructions in this manual.

Your Jiffy Power Ice Drill is designed and manufactured to provide
safe and dependable operation, provided it is operated in
accordance with the following safety precautions.

Preventing accidents is the responsibi lity of every power equipment
operator. The safety precautions identified in this manual must be
fully understood and followed by every operat or of this Jiffy Power
Ice Drill. Review the safety precautions frequently and never take
chances.

Take the time to become familiar with your Jiffy Power Ice Drill and
it’s components, then operate it in a safe manner. Study the
appropriate sections of this manual for the description of the controls
and function of your Jiffy Power Ice Drill. Teach the safety
precautions to all persons who use your Jiffy Power Ice Drill.

+ This symbol points out important safety instructions, which, if

not followed, could endanger your personal safety. Read and
follow all instructions in this manual and any other provided with
this equipment.

+ Avoid mishandling and abuse of your Jiffy Power Ice Drill.

Handle it with care, as any rough treatment can cause damage
to your Jiffy Power Ice Drill or it can cause a malfunction.

+ Should the engine st op while drilling, do not attempt to res tart it

while the drill bit is in the hole.

+ Never attempt to adjust or repair your Jif fy Power Ice Drill while

the engine is running. Avoid possible i njury from moving parts
by first stopping the engine.

+ Never modify your Jiffy Power Ice Drill in any way. Only Jiff y

ice drills and accessories supplied by Feldmann Engineering or
expressly approved by Feldmann Engineering for use with your
Jiffy Power Ice Drill are authorized for connection and use. Th e
use of non-Jiffy or unauthorized components may cause
damage or injury.

+ Check the tightness of screws, nuts, and bolts at regular

intervals and re-tighten if necessary.

+ Do not wear loose clothing while operating your Ji ffy Power Ice

Drill and keep all clothes and parts of the body (hands, feet,
etc.) clear of the rotating ice drill assembly to avoid being drawn
into the boring drill.

+ By wearing cleated or spiked shoes, or i c e creepers when using

your Jiffy Power Ice Drill, you will find it eas ier to control the
rotational torque as you drill holes in the ice.

+ Do not allow children to operate your Jiff y Power Ice Drill at any

time. Do not allow adults to operate your J iffy Power Ice Drill
without proper operational instructions, including all safety
precautions.

+ Do not lend or rent your Jiff y Power Ice Drill without providing

the owner’s manual. Be sure that anyone who uses your Jiffy
Power Ice Drill understands the information contained in this
manual.

+ Give your complete and undivided attention to the proper

operation of your Jiffy Power Ice Drill. To operate it properly,
you must be in good physical condition and m ental health and
not under the influence of any substance (alcohol, drugs , etc.)
which might impair vision, dexterity, or judgment.

+ Using your Jiffy Power Ice Drill may be strenuous . If you have

any condition that may be aggravated by strenuous activity,

check with your doctor before operating your Jiffy Power Ice Drill.

+ Do not operate it when you are fatigued. Tirednes s may resul t in loss of

control of your Jiffy Power Ice Drill.

+ Do not carry your Jiffy Power Ice Drill or leave it unattended while the

engine is running.

+ Close the gas tank cap’s air vent when the engine i s stopped. Drain the

gasoline from the tank before storing or transport ing your Jiffy Power
Ice Drill.

+ When transporting your Jiffy Power Ice Drill in a vehicle, properl y s ecure

it to prevent turnover, spillage and damage.

+ Gasoline is flammable and caution must be used when handling or

storing it.

+ Do not fill the fuel tank while your Jiffy Power Ice Drill is running, if the

engine is hot, or when your Jiffy Power Ice Drill is in an enclosed area.

+ Always fill the fuel tank outdoors.

IMPORTANT INFORMATION

For new, detailed starting i ns tr uc t ions

and other important information, read

the Tecumseh Operator’ s Ma nual

#181-1274-14 for TM049XA engines

PRE-USE PROCEDURE

Before using your Jiffy Power Ice Drill to drill holes in ice, follow this
procedure to prepare for proper and correct use.

• Find, read, and understand Jiffy and Tecumseh owners and
operators manuals. Contact your Jiffy dealer or Feldmann
Engineering if you do not understand any of the ins tructi ons in this
manual.

• Assemble the components of your Jiffy Power Ice Drill as indicated
in the Assembly of Drill section of this manual. Leave the Jiffy
Blade Protector on the drill assembly and make certain it is
securely fastened.

• Go outside and mix fuel as directed in the To Mix Oil and Gasoline,
Fuel Mix Chart section of this manual. Put som e fuel into the tank,
but no more than a quarter of a tankful.

• Re-read and follow the Starting Instructions section of this manual,
and also the Tecumseh Operator’s manual. Letting the Jiffy Power
Ice Drill rest in an upright position on the Jiffy Blade Protector,
carefully start it to verify the satisfactory operation of the engine.

• After allowing the Jiffy Power Ice Drill’s engine to idle for a minute
or so, turn it off as indicat ed in the Stoppi ng Instructions section of
this manual. Drain t he remaining gasol ine from the fuel t ank back
into your pre-mix gas can. Re-start your Jiffy Power Ice Drill and
allow it to run until the fuel is gone. Close the vent on the gas tank,
and your Jiffy Power Ice Drill is now ready for transporting or
storage.

• If the engine does not run satisfactorily, or if you feel it needs an
adjustment of some kind, contact your nearest authorized
Tecumseh warranty station for the proper repairs. Do not at tempt
to adjust the engine operation yourself, only an authorized
Tecumseh service person may make adjustments to your Jiffy
Power Ice Drill’s engine without invalidating the engine warranty.