1 Input Setup
Press Input key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2",
"HDMI3","USB".
Use
/key to select a input source and press ENTER key to confirm.
2 Channels Selection
There are four ways to select channel:
1) Using number keys, and ENTER keys on the remote control
to select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select channels that were either
erased or not memorized.
2) Using CH
When you press the CH
all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
∧/∨ key on the remote control or on your TV to select channel.
∧/∨ key, the TV changes channels in sequence. You will see
3) Press key to return to previous channel, press it again to return to
current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number keys to select the second channel. Then use the button to quickly
alternate between them.
is not activated if no channel has been changed after TV turning on.
4) Select channels from "Channels List" or "Favorite List".
Press List key to choose from "Channel List" menu.
3 Volume Adjustment and Mute Setup
Volume adjustment
Press VOL+/- key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL+/- key:
To increase the volume, press VOL+ key;
To decrease the volume, press VOL- key;
Mute
Press “Mute” and the sound cuts off. The MUTE icon will appear in the lower-right
corner of the screen.
To resume sound, press the “ Mute” button again, or simply press the VOL+ key.
4 Current Channel Information
Press “INFO” key on the remote control to view current
channel information, the indications of channel
information are listed in the following table.
14.1
Press “EXIT” key on the remote control to exit this OSD.
ATSC-1
Moving picture 480i 4:3480i
08:30 09:30
01/ 012005 08:
40
1. Press MENU key to display the main menu on the screen.
2. Press
3. Press
/ key to select "Picture" option.
or ENTER key to enter "Picture" submenu.
Picture Mode
Your TV has four picture settings ( Sports, Normal,Soft,User）
that are preset at the factory. Only "User" mode can be
set to your preference by adjusting particular items such as
Contrast, Brightness, Color, Sharpness,Tint.
1. Press
2. Press
3. Press
4. You can also press the P.Mode key on the
remote control to select one of the picture settings.
▲/▼ key to select "Picture Mode" option.
or "ENTER" key to enter submenu.
▲/▼key to select one picture mode.
1. Press MENU key to display the main menu on the
screen.
2. Press
3. Press
▲/▼ key to select "Sound" option.
► or ENTER key to enter "Sound" submenu.
Sound Mode
You can select the type of the special sound effect
to be used when watching a given broadcast.
Your TV has five sound settings (“Standard”, “Music”,“Movie”,
“Sports”,“User”) that are preset at the factory.
1. Press
2. Press “” or "ENTER" key to enter submenu.
3. Press
▲/▼ key to select "Sound Mode" option.
◄/► key to select one sound mode.
4. You can also press the S.Mode key on the remote
control to select one of the sound.
Standard: Selects the normal sound mode.
Music: Provides clear and live sound for music.
Movie: Provides live and full sound for movies.
Sports: Emphasizes bass over other sounds.
User: Selects your custom sound settings.
Balance
If the volumes of the left speaker and the right speaker are not the same, you can adjust
the "Balance" to suit your personal preference.
1. Press
2. Press
▲/▼ key to select "Balance" option.
◄/► key to decrease or increase the value of the item.
AVL
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “AVL” automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by
raising the sound output whenthe modulation signal is low.
1. Press
2. Press
▲/▼ key to select “AVL” option，press ENTER/► key to enter submenu.
▲/▼ key to select “On” or “Off”.
Surround Sound
This is used to turn on surround sound to gain better sound effect.
1. Press
2. Press
▲/▼ key to select "Surround Sound” option,press ENTER/► key to enter submenu.
▲/▼ key to select “Surround” or “Off”.
Video Description
1. Press ▲/▼ key to select "Video Description” option,press ENTER/► key to enter submenu.
2. Press
▲/▼ key to select “On” or “Off”.
Link Setup
1. Press ▲/▼ key to select “Link Setup” option.
2. Press ENTER or
Enable Link: Press
Auto Power On: When this option is “On” and the
TV is in standby mode. To turn on the DVD can also
turn the TV at the same time.
Auto Standby: When this Option is “On” and the TV
is on, to turn off TV can also turn the DVD into
standby mode.
►key to enter “Link Setup” submenu.
◄/►to turn on/off the link setup.
HDMI EDID
This function is only used in HDMI mode.
1. Press “
2. Press “ ” or "ENTER" key to confirm.
3. Press / key to select “ 4K” or “ 2K”.
" key to select “HDMI EDID" option.
/
Netflix Deactive
1. Press
2. Press ENTER or
3. Press "Yes" to confirm again, the Netflix will be activated.
▲/▼ key to select “Netflix Deactive" option.
► key to confirm.
Netflix ESN
Display the Netflix Esn information.
Netflix Version
Display the Netflix version.
Vudu Deactivate
1. Press “/" key to select “Vudu Deactivate" option.
2. Press “” or "ENTER" key to confirm.
TTS
You can set TTS information in the TTS menu.
1. Press MENU key to display the main menu on the screen.
2. Press
3. Press ENTER/
▲/▼ key to select "Time" option.
► key to enter "Time" submenu.
Off Time
In "Off Time” item, press ►button or ENTER button
to enter the submenu, set the day & time to turn off
the TV set.
On Time
In "On Time” item, press
to enter the submenu, set the time to turn on the TV
set, when the TV set is in the standby mode. You
can also choose which day to control you TV set in a week.
►button or ENTER button
Sleep Timer
1. Press ▲/▼ key to select "Sleep Timer" option,press ►or ENTER button
to enter the submenu.
2. Press
60mins, 90mins, 120mins, 180mins, 240mins).
Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power
failure occurs.
Notes: When the time is less than 60 seconds, remind information will be displayed on
the screen. Press any key button to cancel timer function.
▲/▼ key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins,
Auto Sleep
Press ▲/▼ key to select whether to open the Nosignal Power off features. If this function is
opened, the TV will power off in ten minutes when there is no signal.
Auto Sync
You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is
decided by the DTV signal.
Clock
When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync
is off.
Time Zone
You can choose it to modify your time zone in the TV set.
1. Press
to enter the submenu.
2. Press
▲/▼ key to select "Time Zone" option,press ►or ENTER button
▲/▼ key to select time zone.
1. Press MENU key to display the main menu on the screen.
2. Press
3. Press
▲/▼ key to select "Option" option.
► or ENTER key to enter “Option" submenu.
OSD Language
1. Press ▲/▼ key to select “OSD Language" option.
2. Press ENTER or
Press
OSD Time
Set the preferred amount of time
for the OSD to be displayed on the screen.
▲/▼ key to select a proper language for OSD.
► key to enter submenu.
Closed Caption
1. Press ▲/▼ key to select “Closed Caption" option.
Press ENTER or
2. Press
▲/▼ key to select CC mode.
► key to enter submenu.
Reset
1.Press ▲/▼ key to select "Reset" option.
2.Press
3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory
setting.
► or ENTER key to confirm.
Network Configuration
Please refer to "Network setting"behind.
Software Update(USB)
When the TV need to be updated, please copy the new software to a USB storage and
inset the USB storage to TV, then operating by following steps.
1.Press
2.Press
3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes
and don't turn off the power, it will turn off automaticly when updating is finish.
▲/▼ key to select "Software Update(USB)" option.
► or ENTER key to confirm.
View End-User License
1.Press “/" key to select "View End-User License" option.
2.Press “” or "ENTER" key to confirm.
Internet Update Check
This can update TV through internet.
Network Update Information
Display the Network Update Information.
User Mode
1.Press ▲/▼ key to select "User Mode" option.
2.Press
3.Switch to use mode "Home" or "Store".
► or ENTER key to confirm.
Lock
The "Lock" feature automatically locks out programming that is
deemed inappropriate for children. The user must first enter a Password before any
of the lock restrictions can be set up or changed.
1. Press / key to select "Lock" option.
2. Press ENTER or key to enter "Lock" submenu, "Enter Password" menu
will appear,enter your 4-digit password to enter "Lock" submenu (the default
password is 0000, and the universal password is 1980).
Lock System
Set the Lock function on or off.
2. Press “” or "ENTER" key to confirm.
3. Press / key to select "On" or "Off".
Set Password
2. Enter your 4-digit password to enter enter "Set
Password" submenu. Choose any 4-digits for your
new password and enter them. As soon as the 4
digits are entered, the cursor skipped to “Confirm
Password” item, re-enter the same 4 digits, and
your new password has been memorized.
When the programs is locked, you can also press the menu
key, Info key and so on. Then you can press / key to call
back the input-password window.
USA TV
2. Press
ENTER or .unem VT ASU nepo ot yek
Lock System 1. Press / key to select " " option.
Password1. Press / key to select "Set " option.
USA TV 1. Press / key to select " " option.
Please Enter Password
Lock System
Set Password
USA TV
USA MPAA
Canada English
Canada French
RRT Setting
RRT Reset
Block Unrated TV
USA MPAA
2. Press
ENTER or key to open USA MPAA menu.
Canada English
2. Press
ENTER or key to open Canada English menu.
USA MPAA 1. Press / key to select " " option.
Canada English 1. Press / key to select " " option.
Canada French
2. Press
ENTER or ►key to open Canada French menu.
RRT Setting
2. Press
ENTER or ►key to open RRT Setting menu.
RRT Reset
2. Press
ENTER or ►key to open RRT Reset menu.
Block Unrated TV
2. Press
ENTER or ►key to open Block Unrated TV menu.
Canada French 1. Press / key to select " " option.
RRT Setting 1. Press / key to select " " option.
RRT Reset 1. Press / key to select " " option.
Block Unrated TV1. Press / key to select " " option.
Lock System
Set Password
USA TV
USA MPAA
Canada English
Canada French
RRT Setting
RRT Reset
Block Unrated TV
Before your television can begin memorizing the
available channels, you must specify the type of
signal source that is connected to the TV (i.e. an
antenna or a cable system).
1. Press MENU key to display the main menu on
the screen.
2. Press
3. Press ENTER or
/ key to select "Channel" option.
key to enter "Channel" submenu.
Antenna Mode
1.Press / key to select "Antenna Mode" option.
2.Press “
3.Press
” or "ENTER" key to enter submenu.
/ key to select "Antenna" or "CABLE"
Auto Search
1. Press / key to select "Auto Search" option.
2. Press
or ENTER key to enter submenu.
then a notice window will be displayed on the screen.
Select "Start" to start search or "Cancel" to cancel it.
When searching, press EXIT key to exit tuning at any
moment. Press MENU key to skip DTV tuning when
searching DTV, skip ATV tuning when searching ATV.
3. After all the available channels are stored,
the searching menu will exit.
Program Edit
After the program is searched, select “Program Edit”
in the “Channel” menu, press “ENTER” button,
program can be edited such as delete or skip
according to the user's habit.
Program Edit
5
14-1ATSC-1
14-1ATSC-2
14-1ATSC-3
50-1KOCE-HD
50-2KOCE-SD
50-3KOCE-LB
Delete
Skip Fav
Return
MENU
Skip (Blue) Button
This function can help shield certain program. Program skips
when selecting program by the “
/” button on the TV or
remote control.
1. Select the program to be shielded in the“Program Edit”.
2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of the
program and this program is shielded.
3. To cancel the Skip function, enter the channel edit menu, select the shielded
program and press “Skip” (Blue) button, the skip mark at the left side of the program
disappears then program is recovered.
Delete (Red) Button
This function can help delete program.
1. Select the program to be deleted in the "Program Edit".
2. Press "Delete"(Red) button, the program will be deleted.
Favorite(Yellow) button
This function can help store the favorite program then these programs can be quickly
selected.
Select the program which is favorite.
1.
Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the Program
2.
Edit is store into the Favorites.
o cancel the Favorite function, enter the program edit menu, select the program and
3.T
press “Fav”(Yellow) button, the favorite mark at the left side of the program disappears.
DTV Manual Search
Enter digital number and press “ENTER” to
select DTV Channel.
DTV Manual Search
UHF CH 40
DTV 0
ATV Manual Search
1. Press / key to select "ATV Manual Search"
option.
2. Press or
Current CH
1. Press / key to select the Current CH.
2. Press / key to select current channel.
Fine-Tune
1. Press / key to select the Fine-Tune.
2. Press / key to select a better frequency for
current channel.
ENTER key to enter submenu.
Signal Information(Used only in DTV)
option.
2. Press “
i of the DTV channel. nformation
ENTER”or key ,you can see the
Signal Information1. Press / key to select “ "
NO Signal
Bad N ormal Goo d
MENU
Return
ATV Manual Search
Current CH 12
Frequency 205.250 Mhz
Save Return
ENTER
Fine-Tune
MENU
Channel 13
Name ATSC-1
Modulation ATSC-VSB
Quality 100
Strength 100
Search
1.Press the “Menu” to enter, then pitch on the ”Option”,and press “ENTER” or click the
right button to enter the submenu.
Lock
2.Pitch on the "Network Configuration",and press "
ENTER" or click right button to
enter the "Network Configuration".
3.When the wired network is used, if select dynamic IP address setting, pitch on the
"DHCP" in the "Network Configuration", then click the "Setting", and press
the "ENTER"button to enter.
If select static IP address setting,pitch on the "Static" in the "Network configuration",
then setting up the IP,Nemask,Gateway and DNS in sequence.When the setting
complete,pitch on the "setting" and press the"Enter".
Sc an N etw or k
Sc an N et wo rk
3.VUDU
Use arrow key to Select button, then press “ENTER” key to enter VUDU.
4.pandora
Use arrow key to Select button, then press “ENTER” key to enter pandora.
PANDORA
Welcome to pandora
Do you have a pandora account?
I have a Pandora Account
I am new to Pandora
5.Twitter
Use arrow key to Select button, then press “ENTER” key to enter Twitter.
Input the right Email and password, then select “Authorize app” button and press
“ENTER” key to log in.
OK
EXIT
Enter
Quit
Use arrow key to browse the pages. press “MENU” key to return to main menu and
press “EXIT” key to exit twitter.
Red key: log in or log out twitter.
Green key: refresh current page.
Yellow key: write new tweet.
Blue key: Search tweet.
6.Facebook
Use arrow key to Select button, then press “ENTER” key to enter Facebook.
Input the right Email and password,
select “log In” button, then press
“ENTER” key to log in.
Back
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body
Model: RNSMU5536-C
ACCESSOIRES
MURAL
Contenu
Menu de Image
Menu de Son
Menu de Fonction
Menu de horaire
Menu de option
Menu de Vérrouillage
Menu de Chaîne
Loading...