Jiangmen kangbaishi Electrical appliances MBF 019 User Manual

LOGO
INSTRUCTION MANUAL
Bread maker
MBF-019
Read all instructions before using and save it for future reference
1
CONTENTS :
1.IMPORTANT SAFEGUARDS--------------------------------03-04
2.PRODUCT FEATURES ---------------------------------------04-05
3.QUICK-IDEALS-TO-MAKE-BREADS -------------------------06
4.INTRODUCTION OF CONTROL PANEL-----------------07-08
5.OPERATING GUIDE -------------------------------------------09-13
6.SPECIFIC FUNCTIONS DESCRIPTION -----------------14-15
7.RECIPES RECOMMENDED ---------------------------------15-21
8.CLEANING AND MAINTENANCE -----------------------------21
9.TECHNICAL SPECIFICATION ----------------------------------22
10.PROBLEM SOLUTION --------------------------------------22-23
11.
HOW TO CONTROL DEVICE VIA AMAZON ECHO
-----23-27
2
1.IMPORTANT SAFEGUARDS
When using the electrical appliance,basic precautions should always be followed including the following: Read all instructions.
1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Close supervision is necessary when any appliance is used by or near children.
2. Keep the appliance and its cord out of reach of children less than 8 year.
3. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
4.CAUTION: Hot surfaces. Do not touch hot surfaces. Use handles or knobs. Do not let cord hang over edge of table or counter or touch hot surface.
5.The appliances are not intended to be operated by means of an external timer or separate
remote-control system.
6.Clean surfaces in contact with food.
7. Before use, check that the voltage of wall outlet corresponds to the one shown on the rating
plate.
8. To protect against electric shock do not immerse cord, plugs, or housing in water or other
liquid.
9. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or
taking off parts.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil or other hot
liquids.
12. Do not touch any moving or spinning parts of the machine when baking.
13. Never switch on the appliance without properly placed bread pan filled ingredients.
14. Never beat the bread pan on the top or edge to remove the pan, this may damage the
bread pan.
15. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn
any control to OFF, then remove plug from wall outlet.
16. The appliance is not intended to be operated by means of an external timer or separate
3
remote-control system.
17.Do not operate the unit without bread pan placed in the chamber to avoid damaging the
appliance.
18.The use of attachments not recommended by the manufacturer may cause fire, electric
shock or injury.
19.Do not use it outdoors.
20.Do not use appliance for other than intended use.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
a. Reorient or relocate the receiving antenna. b. Increase the separation between the equipment and receiver. c. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
d. Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY
a. A short power-supply cord should be used to reduce the risk resulting from becoming
entangled in or tripping over a longer cord. b. Longer extension cords are available and may be used if care is exercised in their use. c. If a longer extension cord is used:
4
7
10
8
9
2
3
4
1
5
5
1) The markded electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; and
2) The cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over unintentionally.
3) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
d. The body needs to keep a minimum distance of 20 cm from the machine during normal
use.
2.PRODUCT FEATURES
1. Handle
2. LCD Touch Control Panel
3. Steel Housing
4. Fruit Dispenser
5. Bread Barrel
6. Viewing Window
7. Stirring Rod
8. Hook
9. Measuring Spoon
10. Measuring Cup
6
5
Explanation on Measuring Cup
Cup of liquid. (Please see the right graphic)
1. When you take some liquid with transparent cup and try to measure desirable amount, place measuring cup on the flat table at your eyes level. If need to add egg or milk, you would have to mix them into water before reading scale.
2. Measure solid powder ingredient: hold desirable solid powder with this transparent measuring cup, shaking cup lightly in order to flatten the surface of powder, and then read correct scale. Please don’t shake cup for long or sharply, otherwise the powder might descend to the scale lower than requested amount.
One cup
Tips: one cup of flour’s weight approximated 160g
Measuring Spoon:: small spoon and big spoon, used for measuring material
Hook::used for taking the Stirring Rod out from bread.
3.QUICK-IDEALS-TO-MAKE-BREADS
Made Soft Bread at 750g and Medium Color::
1. Clean Bread Barrel, Stirring Rod, Measuring Cup and Measuring Spoon.
2. Align the oblate hole at stirring rod to the corresponding position of revolving axle in bread barrel and fix in appropriate position.
6
3. As recommended Recipe Book’s “Soft Bread” -750g please add material by order. Be sure to add yeast powder above flour and not allow yeast powder to touch water.
4. Put bread barrel into the container and fix it into position, covering the lid.
5. After plugging bread baker to outlet screen displays Defaulted Menu immediately: 750g/Medium Color/ Soft Bread
6.Press “Start/Stop/Pause” with a buzzer sound, indicator light flashed, and bread baker begins to knead.
7. The bread is done as soon as the countdown is over. At this time, program auto-starts “Keep warm”.
8. Pressing “Start/Stop/Pause” for 3 seconds followed by giving a buzzer sound, “Keep warm” is stopped.
9. After bread is done, please wear glove to lift bread barrel and take it out, turning barrel upside down to take out bread.
Tips It may happen the stirring rod remains stuck in the bread when it is turned out . In this case, use the hook accessory as follows.
1) insert the hook in the axis of the stirring rod(A).
2) pull gently to release the stirring rod(B).
Attention: the above bread-making approach is the easiest, no need to use “Menu”, “Loaf” and “Color”. Please refer to “User Manual” for more details.
4.INTRODUCTION OF CONTROL PANEL
1. “Menu”
When select one from the menus 1-17 displayed in Control Panel (see the right graphic), LCD indicator will show the corresponding setting:
1—“Soft Bread” ; 2—“Sweet Bread” ; 3—“Natural Sourdough”; 4—“French” ; 5—“Whole-Wheat” ; 6—“Quick” ;
7
7—“Sugar-Free”; 8—“Multigrain ” ; 9—“ Milky Loaf ” ; 10—“Cake”; 11—“Raw Dough”; 12—“Leaven Dough” 13—“Jam”; 14—“Bake”; 15—“Yogurt”; 16-“Gluten Free”; 17-“Customer Mode”;
2.”LOAF”:: In setting status, pick one of 500g/750g/1000g as bread weight. Except for 1 to 9, “Loaf” can’t be adjusted. And three weight 500g/750g/1000g choice. Long press “LOAF” for more than 3 seconds, WIFI connection will be cancelled, WIFI and router icons on LCD display will disappear.
3. “COLOR”::Select bread color by pressing Light/Medium/Dark one by one in circle for Whole Wheat Bread, French Bread …When select one color, the upper will display the corresponding mark. Long press “COLOR” for more than 3 seconds, WIFI connection will be ready, WIFI icons on LCD display will flash.
4. “START/STOP/PAUSE”::Press this button to start or stop the working of bread maker, giving a buzzer sound. When bread baker begins to work, for avoiding exceptional contact or collision, this performance will start “Exceptional Stop” as protection performance. When press this button for 1second until hear a prompt sound “Buzz”, the unit stops working immediately. NOTE: Within one second short press is “Pause” , the program stops the countdown, the machine all the action at status of “Pause”, you can add some ingredients, etc., press again to quit “pause”, all programs continue the original action. “Stop” Press 3 seconds or more is required.
5. “+”:: In setting status, each pressing this button will add 1,5 or 10minutes delay. If press this button without releasing, the program would rapidly add the time of
delay up to the maximum time of delay. At this moment program would return to the original minimum time of delay and continue to move like this in circle.
6. “-”:: In setting status, each pressing this button will reduce 1,5 or 10minutes delay. If press this button without releasing, the program would rapidly reduce the
time of delay up to the minimum time of delay. At this moment program would return to the original maximum time of delay and continue to move like this in circle.
8
7. Working Status Includes:
Reservationif you need—Preheat—Knead1--Rest—Knead2—Ferment1,2,3
--Bake—Keep Warm—Complete
8. Working for START/PAUSE/STOP
This bread maker(program 1-9 and 16) have function of “Reservation”. after set your reservation time, click button “start /stop/pause ”, ":" starts flashing, reservation function is activated, the countdown begins. If you do not want an appointment, click on “start / stop/ pause” button, ":" starts flashing, bread maker start working. program 10-17 (except program 16) without the function of “Reservation”, but can be adjusted according to your time, set the time click “Start / Stop/Pause”, the time display stops flashing, which means that OK, and then click “Start/ Stop/ Pause”, ":" Start flashing, bread maker start working. When on the halfway of bread maker working or reservation, if you want to pause bread maker, please click on the “Start / Stop/Pause” button to hear a beep, the time display flashes, toaster work suspended; if you want to cancel pause, please Click again to “Start /Stop/Pause” button. If you want to terminate the machine, please press “Start / Stop/Pause” button, you hear a beep, LCD display to its default state, bread maker work stopped.
5.OPERATING GUIDE
Please be careful before use::
Check wire cord, socket and fuse box in order; Rating Load is higher than 3A.
Bread Maker must be grounded in safe. Earth Wire and Zero Line must be
separated, preventing them from twisting in each other over three-plug connector.
Operation Instruction on Making Bread:
Take out bread barrel from the inside of container and put stirring rod into barrel.
1
9
Loading...
+ 19 hidden pages