Jiangmen Dascom Computer Peripherals DP530SI User Manual

FP-530si ,DP-530si

Operator’s Manual

Printek, LLC

2515 Lakeshore Drive

Saint Joseph, MI 49085-2977

269-925-3200

www.printek.com

Printek, LLC. A Company.

Part Number 7666 Rev A

FCC Part 15 Class B

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: 1) this device may not cause interference; 2) this device must accept any interference, including
interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter
by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication. Maximum power output plus maximum antenna gain of the EUT is: 4.5W/m2 , Limit is 10Wm2.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par
Industrie Canada.

Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante. La puissance de sortie maximale plus
gain d'antenne maximal du EUT est : 4.5W/m

2

Limite est 10W/m

2

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and the receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Canadian and FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co­located or operating in conjunction with any other antenna or transmitter.

Part 15.21 Caution: Changes or modifications not expressly approved by Printek, LLC could void the user’s authority to
operate the equipment.

Canadian Department of Communications Radio Interference Statement

i www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Acknowledgments:
Printek is a registered trademark of Printek, LLC
Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Zebra, CPCL and ZPLare registered trademarks of Zebra Technologies

Windows is a registered trademark of Microsoft Corporation
All other trademarks are the property of their respective owners.

© 2015 By Printek LLC, 1517 Townline Road, Benton Harbor, MI 49022. All rights reserved.

Read all set up and operating instructions before proceeding with operation. Do not operate in an enclosure unless properly

ventilated. Do not operate near a heat source.

Lesen Sie vor der Inbetriebnahme die Aufbau- und Bedienungsanleitung Betreiben Sie den Drucker nicht in einem kleinen,
geschlossenen Raum, es sei denn dieser wird ordnungsgemäß belüftet. Nehmen Sie den Drucker nicht in der Nähe einer Wärmequelle in
Betrieb

No user-serviceable parts inside. Refer service or repairs to a qualified service professional. Use of genuine Printek replacement
parts is required to warrant proper, safe operation. Any alteration or modification of this device voids the user warranty and may make the
product unsafe to operate. The print head and motors get hot during use. Wait until they cool before touching them. Make certain the printer
is disconnected from AC power before removing any covers or performing any required cleaning or maintenance. Connecting this printer
to an ungrounded receptacle can result in electrical shock. Never place the printer near inflammable or explosive substances. Do not
operate near liquid or spill liquid into the printer at any time.

Enthält keine Teile, die vom Bediener instandgesetzt werden können. Bitte wenden Sie sich bei Instandsetzung oder Reparatur an
qualifiziertes Kundendienstpersonal. Die Verwendung von echten Printek Ersatzteilen ist notwendig, um ordnungsgemäßen, sicheren
Betrieb zu gewährleisten. Änderungen oder Modifikationen dieses Geräts machen die Garantie ungültig und können den sicheren Betrieb
des Produkts gefährden. Während des Druckens werden Druckerkopf und Motoren heiß. Warten Sie, bis sich die Teile abgekühlt haben,
bevor Sie sie berühren. Vergewissern Sie sich, dass der Drucker nicht mehr an die Stromquelle angeschlossen ist, bevor Sie Abdeckungen
abnehmen oder das Gerät reinigen bzw. warten. Schließen Sie diesen Drucker nicht an eine ungeerdete Steckdose an; dies kann zum
Elektroschock führen. Setzen Sie den Drucker niemals in die Nähe von feuer- oder explosionsgefährlichen Stoffen. Betreiben Sie den
Drucker nicht in der Nähe von Flüssigkeiten und lassen Sie keine Flüssigkeiten in den Drucker gelangen.

Specifications are subject to change without notice.

ii www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Table of Contents

Introduction.................................................................................................................................................. 2

Printer Features ........................................................................................................................................... 3

Quick Start Instructions .............................................................................................................................. 4

A. Paper Load ........................................................................................................................................ 4

B. 9 Pin D-Connector Pin Out ................................................................................................................ 5

C. Power On ........................................................................................................................................... 5

D. Control Panel ..................................................................................................................................... 5

E. Performing a Printer Self-Test ........................................................................................................... 6

Configuration ............................................................................................................................................... 7

A. Connectivity Parameters .................................................................................................................... 9

Printing Modes .......................................................................................................................................... 19

A. ASCII Based Print Jobs ................................................................................................................... 19

B. Graphic Based Print Jobs ................................................................................................................ 19

Integrating the Printer into your Business Applications ...................................................................... 20

Step by Step – Creating a Link from Host to Printer ............................................................................. 20

A. Windows Desktop Computers ......................................................................................................... 20

Print Drivers ............................................................................................................................................. 20

I. SERIAL ....................................................................................................................................... 20

II. USB ............................................................................................................................................. 20

III. Bluetooth – General .................................................................................................................... 20

IV. Bluetooth – Windows 7 and above ............................................................................................. 20

B. Windows Tablets and Smartphones ................................................................................................ 21

C. Android Tablets & Smart phones ..................................................................................................... 21

I. Bluetooth ..................................................................................................................................... 21

D. Apple™ Tablets & Smartphones ..................................................................................................... 21

I. Bluetooth ..................................................................................................................................... 21

Media .......................................................................................................................................................... 22

A. Standard Media ................................................................................................................................ 22

B. Black Mark Media Position............................................................................................................... 22

Maintenance and Troubleshooting .......................................................................................................... 23

A. Cleaning ........................................................................................................................................... 23

B. Troubleshooting ............................................................................................................................... 23

I. General Error Conditions ............................................................................................................ 24

II. Fault Description and Resolution ................................................................................................ 24

C. Obtaining Service ............................................................................................................................. 25

APPENDIX .................................................................................................................................................. 26

A. Appendix A – FieldPro 530si Printer Specifications ........................................................................ 26

Glossary of Terms ..................................................................................................................................... 27

Index ........................................................................................................................................................... 29

1 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Introduction

Thank you for purchasing the Printek FieldPro 530si Series mobile thermal printer. The FP530si series
prints on special thermal media supplied in roll form up to 3.125 inches wide. All models are equipped
with a USB port which supports printer configuration. All models support an optional internal Bluetooth.
Complete specifications may be found in Appendix A – FieldPro 530si Printer Specifications.

The remainder of this manual focuses on preparing the printer for initial use and performing tasks that will
be encountered during daily use.

Maintenance and Troubleshooting describes how to maintain the printer for optimal performance and has

information on how to diagnose any problems that may occur.
Printek recommends using genuine Printek supplied media and accessories. For detailed lists and

contact information, please see Appendix B – Supplies and Accessories & Appendix C – Media.

2 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Printer Features

Paper Door

Paper door release button

USB connector under I/O cover

Control Panel

Your FieldPro 530si features:

 Easy-to-read control face and simple drop-in paper loading

Serial I/O and Power Connector

 Quickly prints a wide variety of tickets, receipts, and labels.
 IP54 rated for water and dust resistance... plus rated for repeated 6-foot drops to concrete
 Print speeds up to 5 ips
 Extensive fonts, character sets, bar codes and graphic capabilities
 Printer configuration is quick and easy with a web based interface
 Compatible with Windows, Windows Mobile and Android
 Emulations that allow the printer to be a drop-in replacement for nearly any mobile printer

For detailed specifications reference Appendix A – FieldPro 530si Printer Specifications.

3 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Quick Start Instructions

A. Paper Load

4 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Pin Color Description

1 - NC
2 White Receive data (From Host)
3 Green Transmit data (From Printer)
4 - NC
5 Black Ground
6 - NC
7 - NC
8 Red Power (8-32 VDC)
9 - NC

Shell Drain wire

Control Panel

Power Button

Power Up
Power Down
Toggle IP over USB
on/off

Press & Release
Press & Hold
Press twice

Paper Feed Button

Advance paper
Print Setup Report

Press once
Press twice

Power & Status

(Green/Red)

Alert

(Red)

Indication

On

On

Booting up

On

Off

Ready

On

Flashing

Paper Error/Lid Open

Flashing

Off

Job is arriving

Flashing

Off

Job is printing

Flashing

Flashing

IP over USB active

Solid, Flashes Off Every 2

Seconds

Off

Wireless Personal Area Network

active

B. 9 Pin D-Connector Pin Out

Use table to connect Power and RS232 serial communication:

C. Power On

Printer automatically turns on when power is applied.

D. Control Panel

5 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

E. Performing a Printer Self-Test

With power on, press the paper feed button twice quickly.

6 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]

Configuration

Configuration of the FP530si printer is done through a built-in web page. This allows you to configure
the printer from any device that has a browser and is compatible with your FP530si communication
capabilities.

1. Turn the printer ON.

2. Connect a USB cable between the printer and a PC.

3. To access the FP530si web page, push the Power button twice rapidly. This will put the printer
into Configuration mode.

4. When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
a. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit

Enter - A login box should appear:

b. Use the dropdown box to select a language other than English.
c. Type “0000” and hit Enter- you should now be at the home page for FP530si Configuration.

7 www.printek.com | P: 888.211.3400 | F: 269.925.8539 | E: [e-mail]