JHS Pedals SCREAMER User guide

Page 1
SCREAMER
The 3-Series Screamer is the beloved JHS Tube Screamer “Strong Mod”, but in a brand-new $99 pedal. This pedal represents years of Josh playing around with the legendary Tube Screamer circuit and wanting to oer those changes in an aordable package. You will find more clean headroom, better usability as a boost, more versatile drive and tone controls as well as a more pleasing frequency response. This may be the most well-balanced Tube Screamer on earth, but that’s for you to decide.
CONTROLS
VOLUME - Controls the overall volume of the pedal. Left is less, right is more. Tons of volume on tap. TONE - Controls the overall brightness of the tone. Left is darker, right is brighter. DRIVE - Controls the amount of drive/gain. Left is less, right is more. +/- - Toggle changes the clipping. Up is asymmetrical clipping (which is the strong mod clipping).
Down is symmetrical clipping (stock TS9 TS808 style).
JACKS
INPUT - 1/4” jack on the right side of the pedal. OUTPUT - 1/4” jack on the left side of the pedal. POWER - Requires 9V DC negative center power and consumes 12mA. Do not use more than 9V DC.
You will void your warranty.
Loading...