Motor Driven Buffers
Fully Enclosed -- Four
Ball-Bearing
JKlOUNT Four Ball-Bearing
Motor Buffers allow greater ac
cessibility for large and odd
shaped pieces and permit two
opera tors to work
venience. Construction is similar
to the regular Blount Motor
Buffers of equal size and type.
Greater
cool operation result from the
special corrugated frame that
encloses the highly efficient and
economical motor.
high carbon steel spindle that is
exactly ground to rotor and
bearing fits, runs in four heavy duty type self-aligning bearings. Double
recessing of spindle collar into the end-shield flange eliminates dust and
dirt.
Wheel flanges of correct size are finished all over. Spindle assembly unit
is in a perfect balance. Spindles are
hand end. Columns are sturdy in design. Flat surfaces of motor, pan
and column are exactly machined to assure firm assembly.
radiating surface and
There is a lock for holding the spindle when changing wheels.
Special spindles and points to sketch can be made to order.
When ordering, please give full current characteristics.
For dimensions, see back side.
Type
wi
thou t incon
A heavy
provided with taper
point
for
right-
MANUFACTURED BY
I. G. BLOUNT
CO
■»
EVERETT 49,
.
>.V
s
m
■
&
r.---
'
2 II.P.
1750 or
Molor H.P. and speed
Distance between inner flanges
Diameter between flanges
Height,
Size of base
base to centre spindle
Net weight
Approximate shipping weight
Above machines for Alternating Current only and for the following characteristics:
3 phase, 60 cycle, 220, 440 or 550 volts.
3450 R.P.M.
1 A"
37J/T
22"x
21"
490 lbs.
550 lbs.
3 II.P.
1750 or
3450 R.P.M.
38"38"
l A"
37 A"
22"x
21"
518 lbs.
lbs.
578
5 II.P.
1150. 1750 or
3450 R.P.M.
IA" or V/2"
37M"
22"x23^"
738 lbs.
823 lbs.
42"
V/
2 H.P.
1150, 1750 or
3450 R.P.M.
42"
1A" or 1 A"
37M"
22" x 2334"
758 lbs.
843 lbs.
2 phase 60 cycle. 220 or 440 volts.
EVERETT 49, MASS., II.S.A
■yjfr-
BULLETIN C-11
____________
Loading...