Jetway V400DA1A User Manual
V400DA
USER'S MANUAL
M/B For Socket-A Athlon XP/Duron Processor
Trademark:
NO. G03-V400DA1A
Release date: December 2002
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
TABLE OF CONTENT
USER’S NOTICE................................................................................ ii
MANUAL REVISION INFORMATION.............................................. 1
COOLING SOLUTIONS ................................................................... 1
CHAPTER 1 INTRODUCTION OF V400DA MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD ............................................... 2
1-2 SPECIFICATION .................................................................... 3
1-3 PERFORMANCE LIST............................................................. 4
1-4 LAYOUT DIAGRAM & JUMPER SETTING ................................ 5
CHAPTER 2 HARDWARE INSTALLATION
2-1 HARDWARE INSTALLATION STEPS ........................................ 7
2-2 CHECKING MOTHERBOARD'S JUMPER SETTING.................... 7
2-3 INSTALL CPU ........................................................................ 9
2-3-1 GLOSSARY...........................................................................9
2-3-2 ABOUT AMD ATHLON XP & DURON 462-PIN CPU ....................
2-4 INSTALL MEMORY................................................................ 11
2-5 EXPANSION CARD ................................................................. 12
2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION .............12
2-5-2 ASSIGNING IRQ FOR EXPANSION CARD.................................
2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD.......
2-5-4 AGP SLOT ............................................................................
2-6 CONNECTORS, HEADERS....................................................... 13
2-6-1 CONNECTORS ......................................................................
2-6-2 HEADERS.............................................................................16
2-7 STARTING UP YOUR COMPUTER ........................................... 19
10
12
13
13
13
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP.................................................................. 20
3-2 GETTING HELP ..................................................................... 20
3-3 THE MAIN MENU................................................................... 21
3-4 STANDARD CMOS FEATURES................................................. 22
3-5 ADVANCED BIOS FEATURES .................................................. 23
3-6 ADVANCED CHIPSET FEATURES ............................................ 25
3-6-1 DRAM TIMING SETTINGS............................................. 26
3-6-2 AGP TIMING SETTINGS................................................ 27
3-6-3 PCI TIMING SETTINGS ................................................. 27
3-7 INTEGRATED PERIPHERALS.................................................. 28
3-7-1 ONCHIP IDE FUNCTION ............................................... 28
3-7-2 ONCHIP DEVICE FUNCTION ......................................... 29
3-7-3 ONCHIP SUPER IO FUNCTION ...................................... 30
i
3-8 POWER MANAGEMENT SETUP............................................... 31
3-8-1 WAKE UP EVENTS....................................................... 32
3-8-1.1 IRQS ACTIVITIES...................................................33
3-9 PNP/PCI CONFIGURATION SETUP .......................................... 33
3-9-1 IRQ RESOURCES ......................................................... 34
3-10 PC HEALTH STATUS ............................................................. 34
3-11 MISCELLANEOUS CONTROL................................................. 35
3-12 LOAD STANDARD/OPTIMIZED DEFAULTS ............................. 36
3-13 SET SUPERVISOR/USER PASSWORD ...................................... 36
CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION
MAGIC INSTALL SUPPORTS WINDOWS 9X/NT/2K/XP ..................... 37
4-1 VIA 4 IN 1
4-2 SOUND
4-3 PC-HEALTH
INSTALL VIA SERVICE PACK 4 IN 1 DRIVER
INSTALL CMI AUDIO CODEC DRIVER
WINBOND HARDWARE DOCTOR MONITORING SOFTWARE
........................ 39
........................................................................ 41
4-3-1
HOW TO UTILIZE PC-HEALTH
4-4 MAGIC BIOS
4-5 PC-CILLIN
4-6 USB 2.0
INSTALL BIOS LIVE UPDATE UTILITY
INSTALL PC-CILLIN2002 ANTI-VIRUS PROGRAM
INSTALL VIA USB 2.0 DEVICE DRIVER ...............................
....................................... 41
........................ 42
4-7 HOW TO DISABLE ON-BOARD SOUND .................................... 45
4-8 HOW TO UPDATE BIOS .......................................................... 45
................ 38
.......... 43
44
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT
MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN
ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE
MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE V400DA MOTHER
-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT
WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES
THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE
OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY
NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE
COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION
AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.
ii
Manual Revision Information
Reversion Revision History Date
1.0 First Release December 2002
Item Checklist
V400DA Motherboard
Cable for IDE/Floppy
CD for motherboard utilities
□
Cable for USB Port 3/4 (Option)
V400DA User’s Manual
AMD Athlon™ XP / Duron™ Processor Family
Cooling Solutions
As processor technology pushes to faster speeds and higher performance, thermal
management becomes increasingly crucial when building computer systems. Maintaining the
proper thermal environment is key to reliable, long-term system operation. The overall goal
in providing the proper thermal environment is keeping the processor below its specified
maximum case temperature. Heatsinks induce improved processor heat dissipation through
increased surface area and concentrated airflow from attached fans. In addition, interface
materials allow effective transfers of heat from the processor to the heatsink. For optimum
heat transfer, AMD recommends the use of thermal grease and mounting clips to attach the
heatsink to the processor.
When selecting a thermal solution for your system, please refer to the website below for
collection of heatsinks evaluated and recommended by AMD for use with AMD processors.
Note, those heatsinks are recommended for maintaining the specified Maximum T case
requirement. In addition, this collection is not intended to be a comprehensive listing of all
heatsinks that support AMD processors.
For vendor list of heatsink and fan, please visit：
http://www1.amd.com/products/duron/thermals
http://www1.amd.com/products/athlon/thermals
1
Chapter 1
Introduction of V400DA Motherboard
1-1 Feature of motherboard
The V400DA motherboard is design for use AMD Athlon/Duron/Athlon XP
200MHz/266MHz/333MHz (Double Data Rate) Front Side Bus Frequency CPU,
which utilize the Socket-A design and the memory size expandable to 3.0GB.
V400DA motherboard use the newest VIA KT400 chipset, whose 333/266MHz
(Double Data Rate) Front Side Bus frequency delivers a clear upgrade path to the
future generation of 200/266/333MHz processors. The V400DA provided 266/333/
400MHz memory frequency supported DDR266/DDR333 DDR SDRAM. The V400DA
motherboard offers ULTRA ATA 133 to provide speedier HDD throughout that
boosts overall system performance.
These motherboards also has an integrated AC’97 2.1 CODEC on board which is
fully compatible with Sound Blaster Pro
that gives you the best sound quality and
compatibility. It Supports 4 channel Speaker for 3D Surround Effect.
For those wanting even greater graphic performance, an AGP 8X slot is included on
the board.
With USB control as well as capability of expanding to 6 USB function ports support
USB2.0/USB1.1 Devices, the V400DA meet future USB demand also this motherboard
has built-in hardware monitor function. This will monitor and protect your
computer.
A special design in hardware for protecting Athlon XP CPU from burned, the
system will auto shutdown power supply when CPU is overheat or the CPU FAN is
stop.
In V400DA we design in DDR memory 2.5V Voltage, AGP 1.5V Voltage those can
minor adjustable in BIOS setup. This design can let users approach over clock
demand and also can make system more stable. The V400DA motherboard provides
special function in BIOS Setup to setting CPU Host clock step by step increasing let
users to approach over clocking.
V400DA provides high performance & meets future specification demand. It is
really wise choice for your computer.
2
1-2 Specification
Spec Description
Design
Chipset
CPU Socket
Memory Socket
Expansion Slot &
Headers
Integrate IDE
Audio
BIOS
Multi I/O
ATX form factor 4 layers PCB size: 30.5x21.0cm
∗
VIA KT400 North Bridge Chipset for V400DA
∗
VIA VT8235 South Bridge
∗
Support AMD Athlon 700MHz∼1.4GHz processor
∗
Support AMD Duron 600MHz∼1.3GHz processor
∗
Support AMD Athlon XP1500+~XP2700+ processor
∗
Support 200MHz/266MHz/333MHz (Double Data Rate)
∗
Front Side Bus frequency processors
Reserves support for future AMD Athlon/Duron /Athlon
∗
XP processors
184-pin DDR module socket x3
∗
Support DDR266/DDR333 DDR SDRAM
∗
Expandable to 3.0GB
∗
AGP slot x1 support AGP 3.0 & 4X mode
∗
32-bit PCI slot x5
∗
CNR slot x1
∗
Two PCI IDE controllers support PCI Bus Mastering,
∗
ATA PIO/DMA and the ULTRA DMA 33/66/100/133
functions that deliver the data transfer rate up to 133
MB/s
AC’97 Digital Audio controller integrated
∗
AC’97 Audio CODEC on board
∗
Audio driver and utility included
∗
Support 4 channel Speaker for 3D surround effect
∗
Award 2MBit Flash ROM
∗
PS/2 keyboard and PS/2 mouse connectors
∗
Floppy disk drive connector x1
∗
Parallel port x1
∗
Serial port x2
∗
USB2.0 connector x2
∗
USB2.0 headers x2 (connecting cable option)
∗
Audio connector (Line-in, Line-out , MIC & Game Port)
∗
3
1-3 Performance List
The following performance data list is the testing result of some popular benchmark
testing programs. These data are just referred by users, and there is no responsibility
for different testing data values gotten by users (the different Hardware & Software
configuration will result in different benchmark testing results.)
Performance Test Report
CPU: AMD Athlon XP 2000+
DRAM: 256MB DDR266 X1 (SAMSUNG DDR K4H280838B-TCB0)
256MB DDR333 X1 (MICRON DDR MT46V16M8-6)
VGA Expansion Card: NVDIA Geforce 2 MX400 (1024x768 Hi-color)
Hard Disk Driver: IBM DTLA-305040 (ATA-100)
BIOS: Award Optimal default
OS: Win 98SE
DDR266 DDR333
3D Mark 2000 5678 5687
3D Mark 2001 2554 2550
3D Winbench 2000 105 105
Final Reality 10.34 10.39
Content Creation Winstone 2000 50 50.3
Content Creation Winstone 2001 63.6 64.5
Content Creation Winstone 2002 23.6 23.9
Business Winstone2001 53.9 53.7
Winbench 99:
CPU Mark 99 152 151
FPU Winmark 99 9140 9140
Business Disk Winmark99 7440 7690
Hi-end Disk Winmark99 19600 19400
Business Graphic Winmark 794 790
Hi-end Graphic Winmark 2390 2400
SYS Mark 2000/2001 : SISMark 2000/2001 Rating (Internet Content
Creation / Office Productivity)
SISMark 2000 282 (298/270) 285 (302/272)
SISMark 2001 166 (178/154) 171 (180/163)
SISOFT Sandra 2001 :
Dhrystone ALU MIPS
Whetstone FPU MFLOPS
Int ALU/RAM MB/S
Float FPU/RAM MB/S
Integer SSE2 IT/S
Floating- Point SSE2 MB/S
QUAKE3 DEMO1 FPS
DEMO2 FPS
WCPUID System/CPU Clock
4640 4657
2280 2303
761 827
804 892
9320 9302
10706 10780
178.9 185.2
186.5 191.9
133.79/1672.32 133.79/1672.32
4
1-4 Layout Diagram & Jumper Setting
PS/2 Mouse
PS/2 Keyboard
USB
K/B Power ON
Jumper (JP1)
PS2 KB/Mouse Port
USB Port
PC99 Back Panel
PRINT GAME/MIDI PORT
COM1 COM2
MIC
LINE-IN
LINE-OUT
CPU FAN
CPU Socket
DDR Socket X3
Front Panel Audio
CD Audio
CPU Front Side Bus
Frequency Jumper (JP4)
AGP Slot
PCI Slot
Winbond 83697HF
Chip
CNR Slot
IR Connector
USB Port
(USB1, USB2)
VIA KT400 Chip
ATX Power Connector
FAN2
ATA 133 IDE
Connector
VIA VT8235 Chip
Clear CMOS
Floppy Connector
2MBit Flash ROM BIOS
FAN1
Wake On LAN
Front Panel Connector
(JBAT)
5
Jumpers
Jumper Name Description Page
JP4 CPU Front Side Bus Frequency 4-pin Block P.7
JBAT CMOS RAM Clear 3-pin Block P.7
JP1 Keyboard Power On Enable/Disabled 3-pin Block P.8
Connectors
Connector Name Description Page
ATXPOW ATX Power Connector 20-pin Block P.13
J2 PS/2 Mouse & PS/2 Keyboard
Connector
J3 USB Port Connector 4-pin Connector P.14
PARALLEL Parallel Port Connector 25-pin Female P.14
AUD_GAME Audio/Game Connector 3 phone jack + 15-pin Connector P.14
COM1/COM2 Serial Port COM1/2 Connector 9-pin Connector P.14
FDD Floppy Driver Connector 34-pin Block P.14
IDE1 Primary IDE Connector 40-pin Block P.15
IDE2 Secondary IDE Connector 40-pin Block P.15
6-pin Female P.14
Headers
Header Name Description Page
AUDIO Line-In/Out, MIC header 10-pin Block P.16
USB1/USB2 USB Port Headers 9-pin Block P.16
IDE LED IDE activity LED 2-pin Block P.16
TB LED Turbo LED switch 2-pin Block P.16
RESET Reset switch lead 2-pin Block P.17
SPEAKER Speaker connector 4-pin Block P.17
PWR LED
PW BN Power switch 2-pin Block P.17
WOL Wake On-LAN Headers 3-pin Block P.17
FAN1,FAN2,CPUFAN FAN Headers 3-pin Block P.18
IR IR infrared module Headers 5-pin Block P.18
CDIN1 CD Audio-In Headers 4-pin Block P.18
Expansion Sockets
Socket/Slot Name Description Page
ZIF Socket 462 CPU Socket 462-pin PPGA CPU Socket P.10
DDR1, DDR2, DDR3 DDR SDRAM Module
PCI1, PCI2, PCI3,
PCI4, PCI5
AGP AGP 8X Mode Slot AGP Expansion Slot P.13
Power LED 2-pin Block P.17
Socket
184-pin DDR SDRAM Module
Expansion Socket
P.11
PCI Slot 32-bit PCI Local Bus Expansion slots P.12
6
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1. Check motherboard setting
2. Install CPU
3. Install Memory
4. Install Expansion cards
5. Connect Ribbon cables, Panel wires, and power supply
6. Setup BIOS
7. Install software driver & utility
2-2 Checking Motherboard’s Jumper Setting
(1) CPU Front Side Bus Frequency Setting (4-pin) : JP4
1
JP4
3-4 : 166MHz
4
JP4
1-2 : 100MHz
(Default)
1
4
CPU Front Side Bus Frequency Setting
1
JP4
2-3 : 133MHz
4
Note: CPU Front Side Bus Frequency also can setting step by step in BIOS SETUP,
please refer page 35 Miscellaneous Control in Host Clock at Next.
(2) CMOS RAM Clear (3-pin) : JBAT
A battery must be used to retain the motherboard configuration in CMOS RAM short
1-2 pins of JBAT to store the CMOS data.
To clear the CMOS, follow the procedure below:
1. Turn off the system and unplug the AC power
2. Remove ATX power cable from ATX power connector
3. Locate JBAT and short pins 2-3 for a few seconds
4. Return JBAT to its normal setting by shorting pins 1-2
5. Connect ATX power cable back to ATX power connector
7
(
Note: When should clear CMOS
1. Troubleshooting
2. Forget password
3. After over clocking system boot fail
1 3
JBAT
2-3 closed Clear CMOS
1 3
JBAT
1-2 closed Normal
CMOS RAM Clear Setting
(3) Keyboard Power On function Enabled/Disabled: JP1
When setting Enabled you can using keyboard by key in password to power on system.
1 3
JP1
1-2 closed K/B Power ON Disable
Default)
1 3
JP1
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
8
2-3 Install CPU
2-3-1 Glossary
Chipset (or core logic) - two or more integrated circuits which control the interfaces
between the system processor, RAM, I/O devises, and adapter cards.
Processor socket - the socket used to mount the system processor on the motherboard.
Slot (AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.
AGP - Accelerated Graphics Port - a high speed interface for video cards; runs at 1X
(66MHz), 2X (133MHz), 4X (266MHz), 8X (533MHz).
PCI - Peripheral Component Interconnect - a high speed interface for video cards, sound
cards, network interface cards, and modems; runs at 33MHz.
ISA - Industry Standard Architecture - a relatively low speed interface primarily used for
sound cards and modems; runs at approx. 8MHz.
Serial Port - a low speed interface typically used for mouse and external modems.
Parallel Port - a low speed interface typically used for printers.
PS/2 - a low speed interface used for mouse and keyboards.
USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards,
scanners, and some digital cameras.
Sound (interface) - the interface between the sound card or integrated sound connectors and
speakers, MIC, game controllers, and MIDI sound devices.
LAN (interface) - Local Area Network - the interface to your local area network.
BIOS (Basic Input/Output System) - the program logic used to boot up a computer and
establish the relationship between the various components.
Driver - software, which defines the characteristics of a device for use by another device or
other software.
Processor - the "central processing unit" (CPU); the principal integrated circuit used for
doing the "computing" in "personal computer"
Front Side Bus Frequency - the working frequency of the motherboard, which is generated
by the clock generator for CPU, DRAM and PCI BUS.
CPU L2 Cache - the flash memory inside the CPU, normally Athlon serial CPU has 256K
or above, while Duron will have 64K.
9
2-3-2 About AMD Athlon XP & Duron 462-pin CPU
This motherboard supports Socket-A (Socket-462) AMD Athlon XP /Duron processors.
This motherboard Provides a ZIF Socket-A. The CPU that comes with the motherboard
should have a cooling FAN attached to prevent overheating. If this is not the case, then
purchase a correct cooling FAN before you turn on your system.
WARNING! Be sure that there is sufficient air circulation across the processor’s heatsink
and CPU cooling FAN is working correctly, otherwise it may cause the
processor and motherboard overheat and damage, you may install an
auxiliary cooling FAN, if necessary.
WARNING! Due to this motherboard provides new function of protecting CPU；you
must connect the CPU FAN connector on FAN1 location in order to obtain
this feature. Without connection on FAN1 (or you have connect CPU FAN
on FAN2), the system will shut down immediately to protect both your CPU
and motherboard.
Over heat Protect: Only for Athlon XP serial CPU, when the CPU overheat, system will
auto shut down power supply. You can hear a continue beep sound, the
power button will be locked up. Users must turn off and turn on the AC
power to reset the system otherwise the power button will no function,
the other way is keeping press the push button few seconds till the beep
sound stop, then release the power button and press the power button
again to turn on the power supply.
To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket
and open it by first pulling the level sideways away from the socket then upward to a 90degree angle. Insert the CPU with the correct orientation as shown below. The notched
corner should point toward the end of the level. Because the CPU has a corner pin for two
of the four corners, the CPU will only fit in the orientation as shown.
Socket-A
Colden Arrow
CPU ZIF Socket-A
When you put the CPU into the ZIF socket. No force require to insert of the CPU, then
press the level to Locate position slightly without any extra force.
10
2-4 Install Memory
This motherboard provides three 184-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 3.0GB DDR SDRAM.
Valid Memory Configurations
Bank 184-Pin DIMM PCS Total Memory
Bank 0, 1 (DDR1)
Bank 2, 3 (DDR2) PC2100/PC2700 DDR SDRAM X1 64MB∼1.0GB
Bank 4, 5 (DDR3) PC2100/PC2700 DDR SDRAM X1 64MB∼1.0GB
Total System Memory (Max. 3.0GB) 3 64MB∼3.0GB
PC2100/PC2700 DDR SDRAM X1 64MB∼1.0GB
NOTE!
Make sure the total installed memory does not exceeds 3.0GB, otherwise the
system may hang during startup.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can
refer to figure 2-4 to see what a 184-Pin PC2100/PC2700 DDR SDRAM module looks like.
DDR2 (BANK2+BANK3)
DDR1 (BANK0+BANK1)
DDR3 (BANK4+BANK5)
Figure 2-4
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its
indention on both sides.
WARNING!
For the DDR SDRAM CLOCK is set at 166MHz, use only PC2700compliant DDR Modules. When this motherboard operate at 133Mhz,
most system will not even boot if non-compliant modules are used because
of the strict timing issues, if your DDR Modules are not PC2100compliant, set the DDR SDRAM clock to 100MHz to ensure system
stability.
11
2-5 Expansion Cards
WARNING!
Turn off your power when adding or removing expansion cards or other
system components. Failure to do so may cause severe damage to both
your motherboard and expansion cards.
2-5-1 Procedure For Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary hardware or
software setting for your expansion card such as jumpers.
2. Remove your computer’s cover and the bracket plate on the slot you intend to use.
3. Align the card’s connectors and press firmly.
4. Secure the card on the slot with the screen you remove above.
5. Replace the computer system’s cover.
6. Set up the BIOS if necessary.
7. Install the necessary software driver for your expansion card.
2-5-2 Assigning IRQs For Expansion Card
Some expansion cards need an IRQ to operate. Generally, an IRQ must exclusively assign
to one use. In a standard design, there are 16 IRQs available but most of them are already
in use.
Standard Interrupt Assignments
IRQ Priority Standard function
0 N/A System Timer
1 N/A Keyboard Controller
2 N/A Programmable Interrupt
3 * 8 Communications Port (COM2)
4 * 9 Communications Port (COM1)
5 * 6 Sound Card (sometimes LPT2)
6 * 11 Floppy Disk Controller
7 * 7 Printer Port (LPT1)
8 N/A System CMOS/Real Time Clock
9 * 10 ACPI Mode when enabled
10 * 3 IRQ Holder for PCI Steering
11 * 2 IRQ Holder for PCI Steering
12 * 4 PS/2 Compatible Mouse Port
13 N/A Numeric Data Processor
14 * 5 Primary IDE Channel
15 * 1 Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
12
Loading...