JETWAY P4845GDB, P4845GDBL, P4845GEB, P4845GEBL, P4845PEB User Manual
...
P4845GDB/P4845GDBL
P4845GEB/P4845GEBL
P4845PEB/P4845PEBL
USER'S MANUAL
M/B For Socket 478 Pentium 4 Processor
NO. G03-P4845GEB1A
Release date: November 2002
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
i
USER’S NOTICE........................................................................................................................... 1
MANUAL REVISION INFORMATION.......................................................................................... 1
COOLING SOLUTIONS ..............................................................................................................1
CHAPTER 1 INTRODUCTION OF
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL/P4845PEB/P4845PEBL MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD...................................................................................... 2
1-2 SPECIFICATION ...........................................................................................................3
1-3 PERFORMANCE LIST .................................................................................................... 4
1-4 LAYOUT DIAGRAM & JUMPER SETTING .....................................................................5
CHAPTER 2 HARDWARE INSTALLATION
2-1 HARDWARE INSTALLATION STEPS............................................................................... 7
2-2 CHECKING MOTHERBOARD'S JUMPER SETTING .......................................................7
2-3 INSTALL CPU ................................................................................................................ 8
2-3-1 GLOSSARY....................................................................................................... 8
2-3-2 ABOUT INTEL PENTIUM 4 478-PIN CPU........................................................... 9
2-4 INSTALL MEMORY .......................................................................................................10
2-5 EXPANSION CARD...................................................................................................... 10
2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION ................................... 11
2-5-2 ASSIGNING IRQ FOR EXPANSION CARD ......................................................11
2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD ..................................11
2-5-4 AGP SLOT ........................................................................................................12
2-6 CONNECTORS, HEADERS ...........................................................................................13
2-6-1 CONNECTORS................................................................................................. 13
2-6-2 HEADERS.......................................................................................................... 16
2-7 STARTING UP YOUR COMPUTER................................................................................. 19
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP.......................................................................................................... 20
3-2 GETTING HELP .............................................................................................................20
3-3 THE MAIN MENU.......................................................................................................... 21
3-4 STANDARD CMOS FEATURES...................................................................................... 22
3-5 ADVANCED BIOS FEATURES ....................................................................................... 23
3-6 ADVANCED CHIPSET FEATURES .................................................................................25
3-6-1 DRAM TIMING SETTINGS ................................................................................26
3-7 INTEGRATED PERIPHERALS..........................................................................................27
3-7-1 ONBOARD IDE FUNCTION .............................................................................27
3-7-2 ONBOARD DEVICE FUNCTION ......................................................................28
3-7-3 ONBOARD SUPER IO FUNCTION.................................................................... 29
3-8 POWER MANAGEMENT SETUP.................................................................................... 30
3-8-1 PM TIMER RELOAD EVENTS ............................................................................ 31
3-9 PNP/PCI CONFIGURATION SETUP.............................................................................. 32
3-9-1 IRQ RESOURCES .............................................................................................33
3-10 PC HEALTH STATUS..................................................................................................... 33
3-11 MISCELLANEOUS CONTROL...................................................................................... 34
3-12 LOAD STANDARD/OPTIMIZED DEFAULTS..................................................................35
3-13 SET SUPERVISOR/USER PASSWORD........................................................................... 35
CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION
MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000/XP................................. 36
4-1 INF INSTALL INTEL 845 CHIPSET SYSTEM DRIVER ................................37
4-2 VGA INSTALL INTEL 845G VGA DRIVER ................................................38
4-3 SOUND INSTALL ALC AUDIO CODEC DRIVER ..........................................38
4-4 LAN INSTALL VIA VT6105 PCI 10/100MB FAST ETHERNET DRIVER ...... 39
4-5 PC-HEALTH INTEL 845 PC-HEALTH MONITOR ..................................................40
4-5-1 HOW TO UTILIZE PC-HEALTH.......................................................................... 40
4-6 MBIOS&DX8 INSTALL BIOS LIVE UPDATE UTILITY AND DIRECTX8.1 .................. 41
4-7 IAA INSTALL INTEL APPLICATION ACCELERATOR SOFTWARE ...........42
4-8 PC-CILLIN INSTALL PC-CILLIN2002 ANTI-VIRUS PROGRAM......................... 43
4-9 HOW TO INSTALL USB 2.0 DRIVER .............................................................................. 44
4-10 HOW TO DISABLE ON-BOARD SOUND ......................................................................45
4-11 HOW TO UPDATE BIOS................................................................................................45
TABLE OF CONTENT
1
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE
REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR
BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE P4845GDB/P4845GDBL
/P4845GEB/P4845GEBL/P4845PEB/P4845PEBL MOTHER-BOARD AND WE DO ASSURE THIS MANUAL
MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE.
MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE
OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND
THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S
BENEFIT, WITHOUT INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
1.0 First Release November 2002
Item Checklist
5
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL/P4845PEB/P4845PEBL Motherboard
5
Cable for IDE/Floppy
5
CD for motherboard utilities
□
Cable for USB Port 3/4 (Option)
5
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL/P4845PEB/P4845PEBL User’s Manual
Intel Pentium 4 Processor Family
Cooling Solutions
As processor technology pushes to faster speeds and higher performance, thermal management
becomes increasingly crucial when building computer systems. Maintaining the proper thermal
environment is key to reliable, long-term system operation. The overall goal in providing the
proper thermal environment is keeping the processor below its specified maximum case
temperature. Heatsinks induce improved processor heat dissipation through increased surface area
and concentrated airflow from attached fans. In addition, interface materials allow effective
transfers of heat from the processor to the heatsink. For optimum heat transfer, Intel recommends
the use of thermal grease and mounting clips to attach the heatsink to the processor.
When selecting a thermal solution for your system, please refer to the website below for
collection of heatsinks evaluated and recommended by Intel for use with Intel processors. Note,
those heatsinks are recommended for maintaining the specified Maximum T case requirement. In
addition, this collection is not intended to be a comprehensive listing of all heatsinks that support
Intel processors.
For vendor list of heatsink and fan, please visit :
http://developer.intel.com/design/Pentium4/components/index
2
Chapter 1
Introduction of
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL/
P4845PEB/P4845PEBL Motherboard
1-1 Feature of motherboard
The
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL/P4845PEB/P4845PEBL
motherboard is
design for use Intel Pentium 4 Processor in 478 Pin Package/Northwood Processor with the
Intel 845G/845GE/845PE Chipset delivers a high performance and professional desktop
platform solution. Which utilize the Socket 478 design and the memory size expandable to
2.0GB.
These motherboards use the newest Intel 845G/845GE/845PE Chipset Supports 533MHz
System Bus in data transfer rate. And the P4845GDB/P4845GDBL provided 133MHz SDRAM
clock frequency support DDR266 SDRAM. P4845GEB/P4845GEBL/P4845PEB/
P4845PEBL provided 166MHz SDRAM clock frequency support DDR333 SDRAM. The
motherboard offers ULTRA ATA
100
to provide speedier HDD throughout that boosts overall
system performance.
P4845GDB/P4845GDBL/P4845GEB/P4845GEBL with integrated 2D/3D Graphics Accelerator
which supports 256 bit graphics core, and supports hardware motion compensation assist for
software MPEG/DVD decode, makes this board lower cost alternative to a video card. For those
wanting even greater graphic performance, an AGP 4X slot is included on the board (For
1.5V AGP card only. No for 3.3V or Universal AGP card). This AGP slot will support
either a 4X VGA card or Intel Digital Video Out ports add support for digital displays and
TV-out.
The P4845GDBL/P4845GEBL/P4845PEBL motherboard including PCI LAN Controller chip
support 10/100 Mb/sec Base transfer rate.
These motherboards also has an integrated AC’97 2.1 CODEC on board support 4-channel 3D
surround positioning Audio, which is fully compatible with Sound Blaster Pro that gives
you the best sound quality and compatibility.
With USB control as well as capability of expanding to 6 USB2.0 function ports, these
motherboards meet future USB demand also this motherboard has built-in hardware monitor
function. This will monitor and protect your computer. These motherboards special design in
hardware to protect BIOS from virus crash BIOS data.
These motherboards provide special function in BIOS Setup to setting CPU Host clock step
by step increasing let users to approach over clocking.
These motherboards provided high performance & meet future specification demand. It is
really wise choice for your computer.
3
1-2 Specification
Spec Description
Design
∗
ATX form factor 4 layers PCB size: 30.5x18.0cm
Chipset
∗
Intel 845G (GMCH) Chipset for P4845GDB/P4845GDBL
∗
Intel 845GE (GMCH) Chipset for P4845GEB/P4845GEBL
∗
Intel 845PE (MCH) Chipset for P4845PEB/P4845PEBL
∗
Intel 82801DB I/O Controller Hub (ICH4) Chipset
CPU Socket
(mPGA478B Socket)
∗
Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin
Grid Array (FC-PGA2) package processor
∗
Support CPU Frequency 400MHz & 533MHz
∗
Support 1.5G∼3.06G 478 Pin Pentium 4 processor and
Northwood Processor
∗
Reserves support for future Intel Pentium 4 processors
Memory Socket
∗
184-pin DDR SDRAM module socket x2
∗
Support DDR266 DRAM for P4845GDB/P4845GDBL Support
DDR333 DRAM for P4845GEB/P4845GEBL/
P4845PEB/P4845PEBL
∗
Expandable to 2.0GB
Expansion Slot &
Headers
∗
AGP slot x1 for AGP 1.5V standard only, support AGP 2.0 &
4X mode
∗
32-bit PCI slot x5
Integrate IDE
∗
Two PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100 functions that
deliver the data transfer rate up to 100 MB/s
LAN On Board
(Only for P4845GDBL/
P4845GEBL/
P4845PEBL)
∗
VIA VT6105 PCI LAN Controller chip
∗
Supports 10/100 Mb/sec data transfer rate
Audio
∗
AC’97 Digital Audio controller integrated
∗
AC’97 2.1 Audio CODEC on board support 4-channel Audio
∗
Audio driver and utility included
BIOS
∗
Award 2MB Flash ROM
Multi I/O
∗
PS/2 keyboard and PS/2 mouse connectors
∗
Floppy disk drive connector x1
∗
Parallel port x1, Serial port x2
∗
USB 2.0 connector x2
∗
USB 2.0 headers x2 (connecting cable option, supporting 4
extra USB ports)
∗
Audio connector Line-in, Line-out, MIC & Game Port
4
1-3 Performance List
The following performance data list is the testing result of some popular benchmark testing
programs. These data are just referred by users, and there is no responsibility for different
testing data values gotten by users (the different Hardware & Software configuration will
result in different benchmark testing results.)
Performance Test Report
CPU:
Intel Pentium 4 1.9GHz mPGAB package
DRAM:
256MB DDR266 SDRAM x1 (SAMSUNG K4H280838B-TCB0)
VGA Expansion Card:
NVDIA Geforce2 MX400-64MB (1024x768 Hi-color)
Hard Disk Driver:
IBM DTLA-305040 (ATA-100)
BIOS:
Award Optimal default
OS:
Win 98SE
Frame Buffer
8M On Board
VGA
Geforce2
MX200
Geforce2
MX400
3D Mark 2000 3392 2917 5408
3D Mark 2001SE 1420 1217 2555
3D Winbench 2000 69.8 55.5 104
Final Reality 12.07 10.18 10.06
Content Creation Winstone 2000 44.6 43.8 44.5
Content Creation Winstone 2001 52.5 55.8 56.1
Content Creation Winstone 2002 19.9 20.8 20.8
Business Winstone 2001 46 46.1 46.7
Winbench 99:
CPU Mark 99 113 110 113
FPU Winmark 99 6640 6620 6620
Business Disk Winmark99 5110 5230 5230
Hi-end Disk Winmark99 17100 18800 16600
Business Graphic Winmark 375 408 438
Hi-end Graphic Winmark 1110 1260 1270
SYS Mark 2000/2001 : SYSMark 2000/2001 Rating (Internet Content Creation / Office
Productivity)
SYSMark 2000 211 (232/196) 215 (233/203) 216 (232/205)
SYSMark 2001 156 (172/142) 151 (172/133) 154 (171/138)
SISOFT Sandra 2002 :
Dhrystone ALU MIPS 3577 3578 3582
Whetstone FPU MFLOPS 1141/2378 1149/2359 1142/2356
RAM Int Buffered iSSE2 MB/S 1900 2033 2033
RAM Float Buffered iSSE2 MB/S 1831 1947 1944
Integer SSE2 IT/S 7582 7570 7565
Floating-Point SSE2 IT/S 9200 9206 9219
QUAKE3 DEMO1 FPS 76.6 118.9 172.1
DEMO2 FPS 76.3 120.2 173.0
WCPUID System / CPU Clock 101/1918.93 101/1918.92 101/1918.93
5
1-4 Layout Diagram & Jumper Setting
AGP Slot
Floppy Connector
Intel Chipset
845G/845GE/845PE
Front Panel Connector
ATA 100 IDE Conn.
Clear CMOS (JP4)
USB Port
(USB2, USB3)
CPU FAN
CPU Socket
DDR DIMM X2
SYSFAN2
Intel 82801DB Chip
ATX 12V Power Conn.
LINE-OUT
LINE-IN
MIC
GAME/MIDI PORT
COM1
PS/2 Mouse
PS/2 Keyboard
USB
PRINT
(for P4845GDBL/P4845GEBL/
P4845PEBL)
LAN
Speak Connector
CPU Frequency Select
(JP3)
Winbond 83627HF Chip
IR Connector
PC99 Back Panel
CD Audio
PCI Slot
K/B Power ON
Jumper (JP1)
ATX Power Conn.
2MBit Flash ROM BIOS
Wake On LAN
USB Port
/LAN Connector
(for P4845GDBL P4845GEBL/
P4845PEBL)
PS2 KB/Mouse Port
SYSFAN1
VGA/COM2A
(Option)
VGA (for P4845GDB/P4845GDBL/
P4845GEB/P4845GEBL/)
COM2A (for P4845PEB/P4845PEBL)
COM2 Connector
(for P4845GDB/P4845GDBL/
P4845GEB/P4845GEBL)
6
Jumpers
Jumper Name Description Page
JP3 CPU Frequency Select 3-pin Block P.7
JP4 CMOS RAM Clear 3-pin Block P.7
JP1 Keyboard Power On Enable/Disabled 3-pin Block P.8
Connectors
Connector Name Description Page
ATXPWR ATX Power Connector 20-pin Block P.13
ATX12V ATX 12V Power Connector 4-pin Block P.13
KB
(PS2 KB/MOUSE)
PS/2 Mouse & PS/2 Keyboard
Connector
6-pin Female P.13
UL_B1(USB1) USB Port Connector 4-pin Connector P.13
LAN
(for P4845GDBL/P4845GEBL/
P4845PEBL)
LAN Connectors RJ-45 Connector P.13
LPTA Parallel Port Connector 25-pin Female P.14
L_OUT L_IN MIC/
GAME
Audio/Game Connector 3 phone jack+15-pin
Connector
P.14
VGA
(for P4845GDB/P4845GDBL
P4845GEB/P4845GEBL)
VGA Display Connector 15-pin Female Connector P.14
COM2A
(for P4845PEB/P4845PEBL)
Serial Port COM2
Connector
9-pin Connector P.14
COM1 Serial Port COM1
Connector
9-pin Connector P.14
FDD Floppy Driver Connector 34-pin Block P.14
IDE1/IDE2 Primary/Secondary IDE
Connector
40-pin Block P.15
VGA/COM2A Connector Option
Headers
Header Name Description Page
COM2
(for P4845GDB/P4845GDBL
P4845GEB/P4845GEBL)
Serial Port COM2 Header 9-pin Block P.16
AUDIO Line Out, Line In, MIC Header 9-pin Block P.16
USB2/USB3 USB Port Headers 9-pin Block P.16
SPEAK Speaker connector 4-pin Block P.16
FP
(Power LED/Reset/
IDE LED/ Power Button)
Front Panel Header
(including Power LED/ IDE activity LED/
Reset switch/ Power On Button lead)
9-pin Block P.16
WOL Wake On-LAN Headers 3-pin Block P.17
SFAN1, SFAN2,
CPUFAN
FAN Headers 3-pin Block P.17
IR IR infrared module Headers 5-pin Block P.18
CDIN CD Audio-In Headers 4-pin Block P.18
Expansion Sockets
Socket/Slot Name Description Page
ZIF Socket 478 CPU Socket 478-pin mPGAB CPU Socket P.9
DDR1, DDR2 DDR Module Socket 184-pin DDR SDRAM Module
Expansion Socket
P.10
PCI1 ∼ PCI5 PCI Slot 32-bit PCI Local Bus Expansion slots P.10
AGP AGP 4X Mode Slot AGP Expansion Slot P.12
7
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1. Check motherboard jumper setting
2. Install CPU and Fan
3. Install System Memory (DIMM)
4. Install Expansion cards
5. Connect IDE and Floppy cables, Front Panel /Back Panel cable
6. Connect ATX Power cable
7. Power-On and Load Standard Default
8. Reboot
9. Install Operating System
10. Install Driver and Utility
2-2 Checking Motherboard’s Jumper Setting
(1) CPU Frequency Select (3-pin) : JP3
CPU Clock JP3
AUTO 1-2 closed
(
Default)
100 (400) MHz 2-3 closed
133 (533) MHz Open
CPU Frequency Select
100MHz
JP3
1
3
JP3
1
3
AUTO
(Default)
133MHz
JP3
1
3
(2) CMOS RAM Clear (3-pin) : JP4
A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2
pins of JP4 to store the CMOS data.
To clear the CMOS, follow the procedure below:
1. Turn off the system and unplug the AC power
2. Remove ATX power cable from ATX power connector
3. Locate JP4 and short pins 2-3 for a few seconds
4. Return JP4 to its normal setting by shorting pins 1-2
5. Connect ATX power cable back to ATX power connector
8
Note: When should clear CMOS
1. Troubleshooting
2. Forget password
3. After over clocking system boot fail
CMOS RAM Clear Setting
JP4
13
2-3 closed Clear CMOS
JP4
13
1-2 closed Normal (Default)
(3) Keyboard Power On function Enabled/Disabled: JP1
When setting Enabled you can using keyboard by key in password to power on system.
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
JP1
1
3
JP1
1
3
1-2 closed K/B Power ON Disable
(Default)
2-3 Install CPU
2-3-1 Glossary
Chipset (or core logic) - two or more integrated circuits which control the interfaces between the
system processor, RAM, I/O devises, and adapter cards.
Processor slot/socket - the slot or socket used to mount the system processor on the motherboard.
Slot (AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.
AGP - Accelerated Graphics Port - a high speed interface for video cards; runs at 1X (66MHz), 2X
(133MHz), or 4X (266MHz).
PCI - Peripheral Component Interconnect - a high speed interface for video cards, sound cards,
network interface cards, and modems; runs at 33MHz.
ISA - Industry Standard Architecture - a relatively low speed interface primarily used for sound cards
and modems; runs at approx. 8MHz.
Serial Port - a low speed interface typically used for mouse and external modems.
Parallel Port - a low speed interface typically used for printers.
PS/2 - a low speed interface used for mouse and keyboards.
USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards, scanners,
and some digital cameras.
9
Sound (interface) - the interface between the sound card or integrated sound connectors and speakers,
MIC, game controllers, and MIDI sound devices.
LAN (interface) - Local Area Network - the interface to your local area network.
BIOS (Basic Input/Output System) - the program logic used to boot up a computer and establish the
relationship between the various components.
Driver - software, which defines the characteristics of a device for use by another device or other
software.
Processor - the "central processing unit" (CPU); the principal integrated circuit used for doing the
"computing" in "personal computer"
Front Side Bus Frequency -
the working frequency of the motherboard, which is generated by the
clock generator for CPU, DRAM and PCI BUS.
CPU L2 Cache -
the flash memory inside the CPU, normally Athlon CPU has 256K or above, while
Duron will have 64K.
2-3-2 About Intel Pentium 4 478-pin CPU
This motherboard provides a 478-pin surface mount, Zero Insertion Force (ZIF) socket,
referred to as the mPGA478B socket supports Intel Pentium 4 processor in the 478 Pin
package utilizes Flip-Chip Pin Grid Array (FC-PGA2) package technology.
The CPU that comes with the motherboard should have a cooling FAN attached to prevent
overheating. If this is not the case, then purchase a correct cooling FAN before you turn on
your system.
WARNING!
Be sure that there is sufficient air circulation across the processor’s
heatsink and CPU cooling FAN is working correctly, otherwise it may
cause the processor and motherboard overheat and damage, you may install
an auxiliary cooling FAN, if necessary.
To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and
open it by first pulling the level sideways away from the socket then upward to a 90-degree
angle. Insert the CPU with the correct orientation as shown below. The notched corner
should point toward the end of the level. Because the CPU has a corner pin for two of the
four corners, the CPU will only fit in the orientation as shown.
CPU ZIF mPGAB Socket
Colden Arrow
mPGA478B
When you put the CPU into the ZIF socket. No force require to insert of the CPU, then press
the level to Locate position slightly without any extra force.
10
2-4 Install Memory
This motherboard provides two 184-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 64MB to maximum
memory size of 2.0GB DDR SDRAM.
Valid Memory Configurations
Bank 184-Pin DIMM PCS Total Memory
Bank 0, 1 (DDR1) DDR200/DDR266/DDR333
DDR SDRAM Module
1
64MB∼1.0GB
Bank 2, 3 (DDR2)
DDR200/DDR266/DDR333
DDR SDRAM Module
1
64MB∼1.0GB
Total System Memory (Max. 2.0GB) 2
64MB∼2.0GB
NOTE!
Make sure the installed memory are DDR266 SDRAM support 133MHz
memory clock, otherwise the system may hang during startup.
Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer
to figure 2-4 to see what a 184-Pin DDR200/DDR266 DDR SDRAM module looks like.
DDR2 (BANK2 + BANK3)
DDR1 (BANK0 + BANK1)
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab should
be locked into the DIMM module very firmly and fit into its indention on both
sides.
WARNING!
For the DDR SDRAM CLOCK is set at 133MHz, use only DDR266-compliant DDR
Modules. When this motherboard operate at 133Mhz, most system will not even
boot if non-compliant modules are used because of the strict timing issues, if your
SDR Modules are not DDR266-compliant, set the DDR SDRAM clock to 100MHz
to ensure system stability.
2-5 Expansion Cards
WARNING!
Turn off your power when adding or removing expansion cards or other system
components. Failure to do so may cause severe damage to both your motherboard
and expansion cards.
Figure 2-4
11
2-5-1 Procedure For Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary hardware or
software setting for your expansion card such as jumpers.
2. Remove your computer’s cover and the bracket plate on the slot you intend to use.
3. Align the card’s connectors and press firmly.
4. Secure the card on the slot with the screen you remove above.
5. Replace the computer system’s cover.
6. Set up the BIOS if necessary.
7. Install the necessary software driver for your expansion card.
2-5-2 Assigning IRQs For Expansion Card
Some expansion cards need an IRQ to operate. Generally, an IRQ must exclusively assign to
one use. In a standard design, there are 16 IRQs available but most of them are already in use.
Standard Interrupt Assignments
IRQ Priority Standard function
0 N/A System Timer
1 N/A Keyboard Controller
2 N/A Programmable Interrupt
3 * 8 Communications Port (COM2)
4 * 9 Communications Port (COM1)
5 * 6 Sound Card (sometimes LPT2)
6 * 11 Floppy Disk Controller
7 * 7 Printer Port (LPT1)
8 N/A System CMOS/Real Time Clock
9 * 10 ACPI Mode when enabled
10 * 3 IRQ Holder for PCI Steering
11 * 2 IRQ Holder for PCI Steering
12 * 4 PS/2 Compatible Mouse Port
13 N/A Numeric Data Processor
14 * 5 Primary IDE Channel
15 * 1 Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
2-5-3 Interrupt Request Table For This Motherboard
Interrupt request are shared as shown the table below:
INT A INT B INT C INT D INT E INT F INT G INT H
Slot 1
√
Slot 2
√
Slot 3
√
Slot 4
√
Slot 5
√
Onboard VGA
√
Onboard LAN
√
Onboard USB 1
√
Onboard USB 2
√
Onboard USB 3
√
AC97/MC97
√
12
IMPORTANT!
If using PCI cards on shared slots, make sure that the drivers support
“Shared IRQ” or that the cards don’t need IRQ assignments. Conflicts will
arise between the two PCI groups that will make the system unstable or
cards inoperable.
2-5-4 AGP Slot
This motherboard provides an AGP Slot, only support the 1.5V 4X AGP VGA card.
Do not use AGP 2X card (3.3V) in this motherboard. It will burn and damage the
motherboard due to Intel® 845 chipset can not support AGP 2X (3.3V).
The AGP Slot also supports AGP Digital Display Card for digital display and TV-out.
IMPORTANT!
Before you plug-in AGP card, please make sure the following notice is
fully understood and practiced. If your AGP card has “AGP 4X notch
(show below) please make sure your AGP card is AGP 4X (1.5V) not
AGP 2X (3.3V)
AGP SLOT
Example 1:
SiS 305 & ATi Rage 128 Pro AGP card those golden finger is compatible
with 2X/4X mode AGP slot, but only can support 2X (3.3V) only. If you
install these cards in Intel® 845 based motherboard it will burn and damage
the motherboard.
Example 2:
We also find Diamond Vipper V770 golden finger is design for 2X/4X mode
AGP Slot. It can be adjusted the jumper for AGP 2X (3.3V) or AGP 4X
(1.5V). But the factory default setting is 2X (3.3V). If you install this AGP
card in motherboard without change the jumper setting to 4X (1.5V), it will
burn the motherboard.
2x notch 4x notch
13
2-6 Connectors, Headers
2-6-1 Connectors
(1) Power Connector (20-pin block) : ATXPWR
ATX Power Supply connector. This is a new defined 20-pins connector that usually
comes with ATX case. The ATX Power Supply allows to use soft power on momentary
switch that connect from the front panel switch to 2-pins Power On jumper pole on the
motherboard. When the power switch on the back of the ATX power supply turned on,
the full power will not come into the system board until the front panel switch is
momentarily pressed. Press this switch again will turn off the power to the system
board.
PIN ROW2 ROW1
1 3.3V 3.3V
2 -12V 3.3V
3 GND GND
4 Soft Power On 5V
5 GND GND
6 GND 5V
7 GND GND
8 -5V Power OK
9 +5V +5V (for Soft Logic)
10 +5V +12V
Pin 1
(2) ATX 12V Power Connector (4-pin block) : ATX12V
This is a new defined 4-pins connector that usually comes with ATX Power Supply. The
ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 12V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
Pin 1
(3) PS/2 Mouse & PS/2 Keyboard Connector: KB (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(4) USB Port connector: UL_B1 (USB1)
The connectors are 4-pin connector that connect USB devices to the system board.
(5) LAN Port connector: LAN (Only for P4845GDBL/P4845GEBL/P4845PEBL)
This connector is standard RJ45 connector for Network connector.
(6) Parallel Port Connector (25-pin female): LPTA
Loading...