JETWAY NU792V, NU792C User Manual
NU792 Series
User’s Manual
NO.G03-NU792-F
Revision: 2.0
Release date: May 23, 2018
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
ii
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.
iii
ENVIRONMENTAL SAFETY INSTRUCTION ....................................................................... iv
USER’S NOTICE.................................................................................................................. v
MANUAL REVISION INFORMATION................................................................................... v
ITEM CHECKLIST................................................................................................................ v
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD ............................................................................ 1
1-2 SPECIFICATION .................................................................................................... 2
1-3 LAYOUT DIAGRAM ............................................................................................... 4
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING................................................................................................. 8
2-2 CONNECTORS AND HEADERS............................................................................ 11
2-2-1 CONNECTORS ......................................................................................... 11
2-2-2 HEADERS................................................................................................. 15
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP................................................................................................. 19
3-2 BIOS MENU SCREEN............................................................................................ 20
3-3 FUNCTION KEYS................................................................................................... 20
3-4 GETTING HELP...................................................................................................... 21
3-5 MEMU BARS.......................................................................................................... 21
3-6 MAIN MENU ........................................................................................................... 22
3-7 ADVANCED MENU ................................................................................................ 23
3-8 CHIPSET MENU..................................................................................................... 34
3-9 SECURITY MENU .................................................................................................. 37
3-10 BOOT MENU.......................................................................................................... 38
3-11 SAVE & EXIT MENU .............................................................................................. 39
TABLE OF CONTENT
iv
Environmental Safety Instruction
Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
0 to 60 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from
the welding spots’ that connect components and PCB. Computer should go
through an adaptive phase before it boots when it is moved from a cold
environment to a warmer one to avoid condensation phenomenon. These water
drops attached on PCB or the surface of the components can bring about
phenomena as minor as computer instability resulted from corrosion and oxidation
from components and PCB or as major as short circuit that can burn the
components. Suggest starting the computer until the temperature goes up.
The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher
temperature in the inner of the case.
Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.
v
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED
OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN
PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE
DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME
WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY
KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA,
INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE
USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT
INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
2.0 Second Edition May 23, 2018
Item Checklist
Motherboard
User’s Manual
DVD for motherboard utilities
Cable(s)
1
Chapter 1
Introduction of the Motherboard
1-1 Feature of Motherboard
Onboard Intel® Skylake-U/Kabylake-U series processor, TDP 15 W, never denies
high performance
Support 2* DDR-4 2133 MHz SO-DIMM, maximum capacity up to 32GB
Onboard 2 * RJ-45 gigabit Ethernet LAN port
Onboard 1* full-size Mini-PCIE/MSATA shared slot
Onboard 1* half-size Mini-PCIE slot
Onboard 1* SIM card slot
Support 1* SATAIII device
NU792C:
1* HDMI port & 1* Display port, supports dual display
NU792V:
1* HDMI port & 1* VGA port, supports dual display
Support USB 3.0 data transport demand
Support onboard TPM 1.2/2.0 function (optional)
Compliance with ErP standard
Support Watchdog function
2
1-2 Specification
Spec
Description
Design
UTX form factor; PCB size: 11.7 cm x 11.2 cm
Embedded
CPU
Integrated with Intel® Skylake-U/Kabylake-U series CPU (TDP
15W)
*CPU model varies from different IPC options. Please consult your
dealer for more information of onboard CPU.
Memory Slot
2*DDR4 SO-DIMM slot support 2* DDR4 2133 MHz SO-DIMM up
to 32GB
Support dual channel function
* Note: Memory clock supporting range is decided by specific CPU of the
model. For more memory compatibility information please consults your local
dealer.
Expansion
1* Full-size Mini-PCIE/MSATA shared slot (MMPE)
1* Half-size Mini-PCIE slot (MPE)
1* SIM card slot
Storage
1* SATAIII 6Gb/s port for 5V SATA HDD
1* Full-size Mini-PCIE/MSATA shared slot (MMPE)
LAN Chip
Integrated with 1*Intel i211AT & 1*Intel i219LM Gigabit LAN chip
Support Fast Ethernet LAN function of providing 10/100/1000Mbps
Ethernet data transfer rate
Audio Chip
Realtek ALC662VD HD audio chip
BIOS
AMI Flash ROM
Rear Panel I/O
1* 12V DC-in system power Jack
1* HDMI & 1* DP port (optional for NU792C series )
1* HDMI port (optional for NU792V series )
4* USB 3.0 port (optional for NU792C series )
2* USB 3.0 port & 2* USB 2.0 port (optional for NU792V series )
2* RJ-45 LAN port
1* Audio Line-Out & MIC combo jack
1* Audio Line-In jack
3
Front Panel I/O
1* Power button
1* COM1 RS23/422/485 serial port (optional for NU792C series )
1* VGA port (optional for NU792V series )
2* USB 3.0 port & 2* USB 2.0 port
Internal I/O
1* SATA Power connector
1* 3W amplifier header (SPEAK_CON)
1* CPU FAN header
1* 4-Pin USB 2.0 header for 1* USB 2.0/1.1 port
1* 9-Pin USB 2.0 header for 2* USB 2.0/1.1 ports(optional for
NU792C series )
1* LAN activity LED header
1* GPIO header
1* JBUZZ_COPEN jumper & header combo block
* Note: Many PCs now include XHCI USB controllers which allow for the support of USB 3.0
and higher USB speeds. This inclusion of XHCI controllers has lessened the need for EHCI
USB controllers within platforms. However, legacy operating systems (OS) may not natively
recognize XHCI controllers. You might need to pre-install XHCI driver while desiring to install
a non-XHCI OS (ex.Windows* 7) on Intel platforms which do not include EHCI controllers.
Please contact your representative for more details.
4
1-3 Layout Diagram
NU792C Internal Diagram-Front Side:
RJ-45 LAN Port
Over USB 3.0 Port
RJ-45 LAN Port
Over USB 3.0 Port
USB 3.0 Ports
Display Port
Over HDMI Port
12V DC-in
Power Jack
Line_Out / MIC
Combo Port
Line_In
*
Full-size
Mini-PCIE/MSATA Slot
（
MMPE）
Half-size
Mini-PCIE Slot
(MPE)
SATA HDD
Power-Out
Connector
SPEA
K_CON
Header
COM1
RS232/422/485
Serial Port
USB 3.0 Ports
USB 2.0 Ports
CPUFAN
Connector
Power Button
USB 2.0 Port
Header
2*DDR4
SODIMM
GPIO Port Header
USB 2.0 Port Header
SATAIII Port
LAN_LED
Header
*JBUZZ_COPEN
*JATX_AT
*JBAT
5
NU792V Internal Diagram-Front Side:
RJ-45 LAN Port
Over USB 2.0 Port
RJ-45 LAN Port
Over USB 2.0 Port
USB 3.0 Ports
HDMI Port
12V DC-in
Power Jack
Line_Out / MIC
Combo Port
Line_In
*
Full-size
Mini-PCIE/MSATA Slot
（
MMPE）
Half-size
Mini-PCIE Slot
(MPE)
SATA HDD
Power-Out
Connector
SPEAK_CON
Header
VGA Port
USB 3.0 Ports
USB 2.0 Ports
CPUFAN
Connector
Power Button
2*DDR4
SODIMM
GPIO Port Header
USB 2.0 Port Header
SATAIII Port
*JBUZZ_COPEN
*JATX_AT
*JBAT
LAN_LED
Header
6
NU792C/NU792V Internal Diagram-Back Side:
Note: SIM card slot only work when compatible SIM card installed & 3G LAN card installed
in full-size Mini-PCIE (MMPE) slot.
Intel
CPU
*SIM Card
Holder
7
Connectors
Connector Name
DCIN 12V DC–in System Power Jack
*HDMI-DP
(for NU792C)
Top: Display Port Connector
Bottom: HDMI Connector
*HDMI (for NU792V) HDMI Connector
R_USB1 USB 3.0 Port Connector x2
*UL1/UL2
(for NU792C)
Top: RJ-45 LAN Port Connector
Bottom: USB 3.0 Port Connector
*UL11/UL22
(for NU792V)
Top: RJ-45 LAN Port Connector
Bottom: USB 2.0 Port Connector
AUDIO Line-Out/MIC Combo Port Connector
LINE_IN Line-In Port Connector
*COM1(for NU792C) RS232/422/485 Serial Port Connector
*VGA(for NU792V) VGA Port Connector
FP_USB2 USB 2.0 Port Connector x2
FP_USB1 USB 3.0 Port Connector x2
SATA SATAIII Port Connector
SATAPW1 SATA Power out Connector
Headers
Header Name Description
CPUFAN CPU Fan Header 3-pin Block
SPEAK_CON 3W Amplifier Header 4-pin Block
INT_USB1 USB 2.0 Port Header 4-pin Block
*INT_USB2 (for NU792C)
USB 2.0 Port Header 9-pin Block
LAN_LED LAN Activity LED Header 4-pin Block
GPIO_CON GPIO Header 10-pin Block
JBUZZ_COPEN Pin (1-2): Buzzer Header 4-pin Block
8
Jumper
Jumper Function Description
JBAT Pin (1-2): Clear CMOS RAM Setting
Pin(3-4): Flash Override
Pin(5-6): POK Override
6-Pin Block
JATX_AT ATX Mode & AT Mode Select 3-Pin Block
JBUZZ_COPEN Pin(3-4): Case Open Message Display
Function Select
4-Pin Block
Chapter 2
Hardware Installation
2-1 Jumper Setting
Pin 1&2 of JBAT (6-pin): Clear CMOS RAM Setting
Pin 1&2 of JBAT→ Clear CMOS Setting
Pin 1
1-2 Closed: Clear CMOS.
1-2 Open: Normal;
2
2
Pin 1
JBAT
9
Pin 3&4 of JBAT (6-pin): Flash Override Function Slect
Pin 3
&
4 of JBAT
→
Flash Override
Pin 3
4
4
Pin 3
3-4 Open:Enable Security Measures
in the Flash Descriptor(Default);
3-4 Closed: Disable Security Measures
in the Flash Descriptor(Override).
Pin 5&6 of JBAT (6-pin): POK Override Function Select
Pin 5&6 of JBAT→ POK Override
Pin 5
6
6
Pin 5
5-6 Open:Normal;
5-6 Closed: POK Override.
JBAT
JBAT
Loading...