How it Works
JETWAY
Loading...
NAF791 Series
User Manual
39 pgs8.41 Mb0

JETWAY NMF891 Series, NAF791 Series User Manual

NMF891 Series
User’s Manual
Rev: 1.0
Release date: February 11, 2019
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
ii
ENVIRONMENTAL SAFETY INSTRUCTION ........................................................................ iii
ENVIRONMENTAL PROTECTION ANNOUCEMENT ........................................................... iii
USER’S NOTICE .................................................................................................................. iv
MANUAL REVISION INFORMATION ................................................................................... iv
ITEM CHECKLIST ................................................................................................................ iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 SPECIFICATION ..................................................................................................... 1
1-2 LAYOUT DIAGRAM ................................................................................................ 2
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING ................................................................................................. 6
2-2 CONNECTORS AND HEADERS ............................................................................ 10
2-2-1 REAR I/O BACK PANEL CONNECTORS ................................................. 10
2-2-2 MOTHERBOARD INTERNAL CONNECTORS .......................................... 11
2-2-3 HEADER PIN DEFINITION ........................................................................ 15
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERNING SETUP............................................................................................... 19
3-2 BIOS MENU SCREEN ............................................................................................ 20
3-3 FUNCTION KEYS ................................................................................................... 20
3-4 GETTING HELP ...................................................................................................... 21
3-5 MENU BARS........................................................................................................... 21
3-6 MAIN MENU............................................................................................................ 21
3-7 ADVANCED MENU ................................................................................................. 22
3-8 CHIPSET MENU ..................................................................................................... 30
3-9 SECURITY MENU ................................................................................................... 32
3-10 BOOT MENU .......................................................................................................... 34
3-11 SAVE & EXIT MENU ............................................................................................... 35
TABLE OF CONTENT
iii
Environmental Safety Instruction
l Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
l 0 to 40 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
l Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from the welding spots’ that connect components and PCB. Computer should go through an adaptive phase before it boots when it is moved from a cold environment to a warmer one to avoid condensation phenomenon. These water drops attached on PCB or the surface of the components can bring about phenomena as minor as computer instability resulted from corrosion and oxidation from components and PCB or as major as short circuit that can burn the components. Suggest starting the computer until the temperature goes up.
l The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher temperature in the inner of the case.
l Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.
iv
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
1.0 First Edition February 11, 2019
Item Checklist
R Motherboard R User’s Manual R DVD for motherboard utilities R Cable(s) R I/O Back panel shield
1
Chapter 1
Introduction of the Motherboard
1-1 Specification
Spec
Description
Design
l m-ATX form factor; PCB size: 24.4 x24.4 cm
Chipset
l
Intel
®
H310
Express
Chipset
CPU Socket
l Intel® LGA 1151 Socket for Intel® 8th Generation Coffee
Lake series processors(TDP 65W)
*
Note:
for detailed CPU support information please visit our
website
Memory Slots
l 2*DDR4 U-DIMM slot for 2* DDR4 RAM Module l Support dual channel function
Maximum capacity: up to 32GB Maximum frequency: up to 2666MHz
Expansion Slots
l 1 * PCI-Express x16 slot (PCIE1
)
l 1 * PCI-Express x1 slot (PCIE2
)
l 2 * PCI slot (PCI1/2
)
l 1 * Full-size Mini-PCIE slot (MPE)
Storage
l 3 * SATAIII 6Gb/s port (SATA1/2/3) l 1* M.2 M-key slot, type-2242/2260/2280/22110
with SATA
interface (M2M)
LAN Chip
l Integrated with 2* Realtek RTL8111H Gigabit PCI-E LAN
chip
l Support Fast Ethernet LAN function of providing
10/100/1000Mbps Ethernet data transfer rate
Audio Chip
l Realtek ALC662 6-channel Audio Codec integrated l Audio driver and utility included
BIOS
l AMI Flash ROM
Multi I/O
Rear Panel I/O:
l 1* RS232/422/485 COM port (COM1) l 1* DP port l 1* HDMI port l 1*DVI-D port l 1* VGA port l 2* USB 2.0 port connector l 2* RJ-45 LAN port connector l 4* USB 3.1 (Gen.1) port connector l 1*3-phone audio jack (Line-in, Line-out, MIC)
Internal I/O Connectors & Headers:
l 1 *24-pin main power connector l 1 *8-pin 12V power connector
l 1* CPUFAN connector & 2* SYSFAN connector
2
l 1* Front panel header l 1* Power LED & Speaker header
l 1* Front panel audio header l 1* HDMI_SPDIF out header l 2* LAN Status indicator header(
LAN1_LED/LAN2_LED
)
l 1* PS/2 keyboard & mouse header l 1* GPIO header l 1* SMBUS header l 1* 9-pin front panel USB 2.0 header for 2* expansion
USB
2.0 port
l 1* RS232/422/485 COM port header (COM2) l 8* RS232 COM port header (COM3/4/5/6/7/8/9/10
)
1-2 Layout Diagram
Rear IO Diagram
USB 2.0 Ports
COM1
RS232/422/485
Serial Port
VGA Port
DVI-D Port
USB 3.1 (Gen.1)
Ports
RJ-45 LAN Ports
Line-In
Line-Out
MIC
DP Port
HDMI Port
3
Motherboard Internal Diagram
*Note: SIM card slot only work when compatible SIM card installed & LAN expansion card installed in
MPE Mini-PCIE slot.
USB 2.0
Header
*Rear IO
Connector
(Refer to Page-2)
LGA 1151
CPU Socket
ATX 12V
Power Connector
CPUFAN
Connector
ATX Power
Connector
S
YS
FAN1
Connector
SYS
FAN2
Connector
M.2 M-Key Slot
(M2M)
PCI Express x16 Slot (PCIE1)
PCI Express x1 Slot (PCIE2)
PCI Slot
s
(PCI1/2)
HDMI_SPDIF
Header
LANLED
Headers
Front Panel
Audio
Header
SATAIII Ports
(SATA1/2/3)
PWR LED
&
Speak
er Header
Front Panel
Header
*SIM Card
Slot
SMBUS
Header
Full-size
Mini-PCIE
Slot (*MPE)
DDR4
DIMM Slot x 2
PS2KBMS Header
GPIO
Header
Serial
Port Headers
(COM8/7/6/5/4/3)
Serial
Port Headers
(COM10/9)
Serial
Port Header
(COM2)
Intel Chipset
Buzzer
4
Motherboard Jumper Position
Jumper
Jumper
Name Description
JPCOM1 COM1 Port Pin9 Function Select 4-pin Block JPCOM2 COM2 Header Pin9 Function Select 4-pin Block JPCOM3 COM3 Header Pin9 Function Select 4-pin Block JPCOM4 COM4 Header Pin9 Function Select 4-pin Block JPCOM5 COM5 Header Pin9 Function Select 4-pin Block JPCOM6 COM6 Header Pin9 Function Select 4-pin Block JBAT Clear CMOS RAM Settings 3-pin Block JAT_ATX ATX/AT Mode Select 3-pin Block JP1 ME Features Select 2-pin Block COPEN Case Open Message Display Detect 2-pin Block JP2 MPE (Mini PCI-E)Slot VCC3.3V/3.3VSB Select 3-pin Block
JAT_ATX
JBAT
JPCOM5
JPCOM6
JPCOM3
JPCOM4
JPCOM1
JP2
COPEN
JP1
JPCOM2
5
Connectors
Connector
Name
COM1 RS232/422/485 Serial Port Connector DP Display Port Connector HDMI High-Definition Multimedia Interface
Connector USB1 USB 2.0 Port Connector X2 CRT VGA Port Connector DVI1 DVI-D Port Connector UL1/UL2
Top:
RJ-45 LAN Connector
X2
Middle & Bottom: USB 3.1 (Gen.1) Port
Connector X4 AUDIO
Top:
Line
-
in
Connector
Middle: Line-out Connector
Bottom: MIC Connector
ATXPWR ATX Type Main Power Connector ATX12V ATX 12V Power Connector CPUFAN CPU FAN Connector SYSFAN1/2 System FAN Connector SATA1/2/3 SATAIII Connector X3
Headers
Header
Name
Description
FP (Front Panel Header)
PWR LED/ HD LED/ Power Button
/Reset
9-pin Block
SPK_LED Power LED & Speaker Header 7-pin Block FP_AUDIO Front Panel Audio Header 9-pin Block HDMI_SPDIF HDMI_SPDIF Out Header 2-pin Block LAN1_LED
/ LAN2_LED
LANLED Activity Header 2-pin Block
PS2KBMS PS2 Keyboard & Mouse Header 6-pin Block GPIO_CON GPIO Header 10-pin Block SMBUS SMBUS Header 5-pin Block USB2 USB 2.0 Port Header 9-pin Block COM2 RS232/422/485 Serial Port Header 9-pin Block COM3/4/5/6/7/8/9/10 RS232 Serial Port Header 9-pin Block
6
Chapter 2
Hardware Installation
2-1 Jumper Setting
JPCOM1 (4-pin): COM1 Port Pin9 Function Select
JPCOM1→COM1 Port
6
4 2 3 1 5 1 2 4 6 3 5 2 4 6 1 3 5
2-4 Closed:
RI=RS232;
3-4 Closed:
RI= 5V;
4-6 Closed:
RI= 12V;
JPCOM2 (4-pin): COM2 Header Pin9 Function Select
JPCOM2→COM2 Header
4-6 Closed:
RI= 12V.
6 4 2
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
3
1 5 6 4 2 3 5 1 5 3 1 6 4 2
JPCOM3 (4-pin): COM3 Header Pin9 Function Select
JPCOM3→COM3 Header
4-6 Closed:
RI= 12V.
6 4 2
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
3
1 5 6 4 2 3 5 1 5 3 1 6 4 2
COM2
JPCOM2
COM3
JPCOM3
JPCOM1
7
JPCOM4 (4-pin): COM4 Header Pin9 Function Select
JPCOM4→COM4 Header
4-6 Closed:
RI= 12V.
6 4 2
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
3
1 5 6 4 2 3 5 1 5 3 1 6 4 2
JPCOM5 (4-pin): COM5 Header Pin9 Function Select
JPCOM5→COM5 Header
4-6 Closed:
RI= 12V.
6 4 2
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
3
1 5 6 4 2 3 5 1 5 3 1 6 4 2
JPCOM6 (4-pin): COM6 Header Pin9 Function Select
JPCOM6→COM6 Header
4-6 Closed:
RI= 12V.
6 4 2
3-4 Closed:
RI= 5V;
2-4 Closed:
RI=RS232;
3
1 5 6 4 2 3 5 1 5 3 1 6 4 2
COM4
JPCOM4
COM5
JPCOM5
COM6
JPCOM6
8
JBAT (3-pin): Clear CMOS RAM Settings
2-3 Closed: Clear CMOS.
1-2 Closed: Normal；
1 3 1 3
JBAT→Clear CMOS
JAT_ATX (3-pin): AT Mode /ATX Mode Select
1 3
1 3
JAT_ATX→ATX/AT Mode Select
1-2 Closed: ATX Mode Selected;
2-3 Closed: AT Mode Selected.
*ATX Mode Selected: Press power button to power on after power input ready; AT Mode Selected: Directly power on as power input ready.
JP1 (2-pin): ME Features Select
1-2 Closed:ME Features Disabled.
JP1→ME Features
2
1
1-2
Open
:ME Features Enabled;
1
2
JBAT
JAT_ATX
JP1
Loading...
+ 27 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use