JETWAY JNC9NDL-2550 Technical Manual

TECHNICAL MANUAL

Intel Cedar Trail-D & NM10 Chipset

Based

Mini-ITX M/B for ATOM Processor

NO.

G03-NC9N-F

Revision: 1.0

Release date: September 14, 2012

Trademark:

* Specifications and Information contained in this docume ntation ar e furnishe d for inf ormation us e only , and ar e

subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

Environmental Protection Announcement

Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.

ENVIRONMENTAL SAFETY INSTRUCTION...........................................................................iii

USER’S NOTICE .......................................................................................................................iv

MANUAL REVISION INFORMATION.......................................................................................iv

ITEM CHECKLIST.....................................................................................................................iv

CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD

1-1 FEATURE OF MOTHERBOARD................................................................................1

1-2 SPECIFICATION.........................................................................................................2

1-3 LAYOUT DIAGRAM....................................................................................................3

CHAPTER 2 HARDWARE INSTALLATION

2-1 JUMPER SETTING.....................................................................................................8

2-2 CONNECTORS AND HEADERS................................................................................12

2-2-1 CONNECTORS .............................................................................................12

2-2-2 HEADERS .....................................................................................................14

CHAPTER 3 INTRODUCING BIOS

3-1 ENTERNING SETUP...................................................................................................22

3-2 BIOS MENU SCREEN ................................................................................................23

3-3 FUNCTION KEYS .......................................................................................................23

3-4 GETTING HELP ..........................................................................................................24

3-5 MENU BAR..................................................................................................................24

3-6 MAIN MENU................................................................................................................25

3-7 ADVANCED MENU.....................................................................................................26

3-8 CHIPSET MENU..........................................................................................................32

3-9 BOOT MENU...............................................................................................................34

3-10 SECURITY MENU.......................................................................................................35

3-11 SAVE & EXIT MENU...................................................................................................36

TABLE OF CONTENT

iii

Environmental Safety Instruction

z Avoid the dusty, humidity and temperature extremes. Do not place the product in

any area where it may become wet.

z 0 to 60 centigrade is the suitable temperature. (The figure comes from the request

of the main chipset)

z Generally speaking, dramatic changes in temperature may lead to contact

malfunction and crackles due to constant thermal expansion and contraction from the welding spots’ that connect components and PCB. Computer should go through an adaptive phase before it boots when it is moved from a cold environment to a warmer one to avoid condensation phenomenon. These water drops attached on PCB or the surface of the components can bring about phenomena as minor as computer instability resulted from corrosion and oxidation from components and PCB or as major as short circuit that can burn the components. Suggest starting the computer until the temperature goes up.

z The increasing temperature of the capacitor may decrease the life of computer.

Using the close case may decrease the life of other device because the higher temperature in the inner of the case.

z Attention to the heat sink when you over-clocking. The higher temperature may

decrease the life of the device and burned the capacitor.

USER’S NOTICE

COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.

THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AN D WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).

PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.

Manual Revision Information

Reversion Revision History Date

1.0 First Edition September 14, 2012

Item Checklist

Motherboard

User’s Manual

DVD for motherboard utilities

Cable(s)

I/O Back panel shield

Chapter 1

Introduction of the Motherboard

1-1 Feature of Motherboard

Intel Cedar Trail-D and NM10 chipset, with low power consumption never denies

high performance

Support two DDRIII 800/1066MHz SO-DIMM up to 4GB

Support two Serial ATAII (3Gb/s) Devices

Onboard dual Realtek RTL 8111EVL Gigabit Ethernet LAN chip

Integrated ALC662-GR 6-channel HD audio CODEC

Support USB 2.0 data transport demands

Support PCI slot and Mini-PCIE slot

Integrated with 24-bit single channel LVDS header

Support 6 * COM ports (COM2 for RS232/422/485)

Support Watchdog function

Supports ACPI S3 Function

Support Smart Fan function

Compliance with ErP standard

1-2 Specification

Spec Description

Design z

Mini-ITX form factor; PCB size: 17.0x17.0cm

Chipset

Intel®NM10 Express chipset

Embedded CPU

Intel Cedar Trail-D Processor

Memory Slot

DDRIII SO-DIMM slot x 2

Support two DDRIII 800/1066 MHz SO-DIMM with memory

capacity expandable to 4GB

Expansion Slot

32-bit PCI slot x 1

Mini-PCIE slot x1

Dual LAN Chip

Integrated with dual Realtek RTL8111EVL PCI-E Gigabit LAN

chips

Support Fast Ethernet LAN function of providing

10/100/1000Mbps Ethernet data transfer rate

Audio Chip

Realtek ALC662-GR 6-channel Audio Codec integrated

Audio driver and utility included

BIOS z

AMI 16MB DIP Flash ROM

Multi I/O

Serial port connector x 2

VGA port connector x1

HDMI port connector x1

USB 2.0 port connector x4

RJ-45 LAN connector x2

Audio connector x3 (Line-in/SPDIF-out; Line-out; MIC)

Front panel audio header x1

4-pin USB 2.0 header x1

9-pin USB 2.0 header x1

SM BUS header x1

KBMS header x1

GPIO header x1

Serial port header x4

RS232/422/RS485 header x1

PWRLED header x1

Speaker header x1

Front panel

LANLED header x2

24- bit single channel LVDS header x1

LVDS inverter x1

1-3 Layout Diagram

Rear IO Diagram

MIC-IN

Serial Port

Line-OUT

Line-IN/

Optical SPDIF OUT

RJ-45 LAN Ports

VGA Port

Serial Port

HDMI Port

12V DC

Power-in Jack

Motherboard Internal Diagram

Notice!

When installing only one SODIMM to the board, please always install it

in SODIMM2 slot, otherwise system won’t start.

USB 2.0 Headers

VGA Port over

HDMI Port

RJ-45 LAN Port over

USB 2.0 Ports

Front Panel Audio Header

Power

LED Header

CPUFAN1 Header

Inverter

LVDS Heade

SATAII Ports

(SATA1/SATA2)

Front Panel Header

Speaker Header

Intel CPU

Intel NM10 Chipset

SODIMM2 Slot

Serial Ports

GPIO Header

SODIMM1 Slot

RJ-45 LAN Port over

USB 2.0 Ports

Audio

Connectors

KBMS Header

CI Slo

TX-RX COM

Heade

SFAN1Header

Serial Port Headers

(COM3/4/5/6)

12V DC

Power-in Jack

SATA Power Out

Connector

ATX12V Power Connector

SFAN2 Header

SM_BUS Header

Mini-PCIE Slot

ANLED Headers

Motherboard Jumper Position

ASE_OPE

JP9

JP5

JBAT1

JP7

JP4

Jumper

Jumper Name Description

JBAT1 CMOS RAM Clear Function Setting 3-Pin Block JP1 UL1/UL2 USB Ports Power On Function Select 3-Pin Block JP2 LVDS PVCC 5V/3.3V Select 3-Pin Block JP4 INVERTER VCC 12V/5V Select 3-Pin Block JP5 USB 1/2 Header Power On Function Select 3-Pin Block JP7 COM1 Port Pin9 Function Select 6-Pin Block JP8 COM2 Header RS232/485/422 Function Select 6-Pin Block JP9 MINIPCIE Power 3.3V/ 3VSB Select 3-Pin Block COPEN Case Open Message Display Function 2-Pin Block

Connectors

Connector Name

DC12V_IN DC 12V Power –in Connector COM(COM1/COM2) Serial Port Connector x 2 VGA1 Video Graphic Attach Connector HDMI1 High-Definition Multimedia Interface UL1(Top); UL2(Top) RJ-45 LAN Connector x 2 UL1(Middle & Bottom);

UL2(Middle & Bottom)

USB 2.0 Port Connector x 4

AUDIO1 Line-in with SPDIF/Line-out/MIC ATX12V1 ATX 12V Power Connector SATA1/2 Serial ATAII Connector x 2 PWR2 SATA Power out Connector

Headers

Header Name Description

AUDIO2 Front Panel Audio Header 9-pin block USB1 USB 2.0 Header 9-pin Block USB2 USB 2.0 Header 4-pin Block SM_BUS SM Bus Header 4-pin Block KBMS PS2 Keyboard & Mouse Header 6-pin Block GPIO1 GPIO Header 10-pin Block COM3/4/5/6 Serial Port Header x4 9-pin Block TX_RX RS 422/485 Header 4-pin block PWR LED1 Power LED 3-pin Block SPEAK1 Speaker Header 4-pin Block JW_FP1

Front Panel Header(PWR LED/ HD LED/ /Power Button /Reset)

9-pin Block

LANLED1;LANLED2 LANLED Header x2 2-pin Block CPUFAN1;SFAN1;SFAN2 FAN Speed Headers 3-pin Block LVDS1 24-bit single channel LVDS

Header

35-pin Block

Inverter LVDS Inverter 8-pin Block

Chapter 2

Hardware Installation

2-1 Jumper Setting

(1) JBAT1 (3-pin): Clear CMOS

2-3 clo sed : Clear CMO S

JBAT1

1-2 closed: Normal;

(2) JP1 (3-pin): UL1/UL2 USB Ports Power on Function Select

2-3 clo se d: UL1 /UL 2 US B Por ts Po w er on Func tio n Ena bled

JP1

1-2 closed : UL1/UL2 USB Ports Power on Function Disabled(default);

JP1

+ 28 hidden pages

JETWAY JNC9NDL-2550 Technical Manual

Specifications and Main Features

Frequently Asked Questions

User Manual