TECHNICAL MANUAL
Of
Intel Pine Trail D & ICH8M Chipset
Based
Mini-ITX M/B for ATOM Processor
NO.G03-NF96-F
Rev.:2.0
Release date: March, 2010
Trademark:
* Specifications and Information contained in this docume ntation ar e furnishe d for inf ormation us e only , and ar e
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
i
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize
pollution and ensure environment protection of mother earth, please recycle.
ii
ENVIRONMENTAL SAFETY INSTRUCTION...........................................................................iii
USER’S NOTICE .......................................................................................................................iv
MANUAL REVISION INFORMATION.......................................................................................iv
ITEM CHECKLIST.....................................................................................................................iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD................................................................................1
1-2 SPECIFICATION.........................................................................................................2
1-3 LAYOUT DIAGRAM....................................................................................................3
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING.....................................................................................................7
2-2 CONNECTORS AND HEADERS................................................................................11
2-2-1 CONNECTORS .............................................................................................11
2-2-2 HEADERS .....................................................................................................12
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERNING SETUP...................................................................................................20
3-2 GETTING HELP ..........................................................................................................20
3-3 THE MAIN MENU........................................................................................................20
3-4 STANDARD BIOS FEATURES ..................................................................................22
3-5 ADVANCED BIOS FEATURES..................................................................................24
3-5-1 CPU FEATURE...............................................................................................26
3-6 ADVANCED CHIPSET FEATURES...........................................................................27
3-7 INTEGRATED PHERIPHRALS ..................................................................................28
3-7-1 ONBOARD SATA FUNCTION ........................................................................29
3-7-2 ONBOARD DEVICE FUNCTION.....................................................................30
3-7-3 ONBOARD SUPER IO FUNCTION.................................................................31
3-8 POWER MANAGEMENT SETUP...............................................................................32
3-9 PNP/PCI CONFIGURATIONS.....................................................................................33
3-10 PC HEALTH STATUS.................................................................................................34
3-11 MISCELLANEOUS CONTROL...................................................................................36
3-12 PASSWORD SETTING...............................................................................................37
3-13 LOAD OPTIMIZED /STANDARDDEFAULTS ............................................................38
3-14 SAVE AND EXIT SETUP/EXIT WITHOUT SAVING ...................................................38
TABLE OF CONTENT
iii
Environmental Safety Instruction
z Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
z 0 to 60 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
z Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from
the welding spots’ that connect components and PCB. Computer should go
through an adaptive phase before it boots when it is moved from a cold
environment to a warmer one to avoid condensation phenomenon. These water
drops attached on PCB or the surface of the components can bring about
phenomena as minor as computer instability resulted from corrosion and oxidation
from components and PCB or as major as short circuit that can burn the
components. Suggest starting the computer until the temperature goes up.
z The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher
temperature in the inner of the case.
z Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.
iv
USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED
OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN
PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AN D WE
DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME
WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY
KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA,
INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE
REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE
USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER’S BENEFIT, WITHOUT
INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
2.0 Second Edition March, 2010
Item Checklist
5
Motherboard
5
Motherboard User’s Manual
5
DVD for motherboard utilities
5
Cable(s)
5
I/O Back panel shield
1
Chapter 1
Introduction of the Motherboard
1-1 Feature of motherboard
z
Intel Pine Trail D and ICH8M chipset.
z
Onboard Intel Atom CPU, with low power consumption never denies high
performance.
z
Support FSB 667 MHz.
z
Support DDRII DIMM 667/800 up to 8GB.
z
Support PCI slot and mini-PCIE slot
z
Onboard Realtek RTL 8111DL Gigabit Ethernet LAN.
z
Integrated ALC662 6-channel HD audio CODEC.
z
Support USB2.0 data transport demands.
z
Support RS232/422/485 and watchdog.
2
1-2 Specification
Spec Description
Design z
Mini-ITX form factor; PCB size: 17.0x17.0cm
Chipset
z
Intel Pine Trail D+ICH8M
Embedded CPU
z
Intel Atom D510/D410 CPU
Memory Socket
z
240-pin DDRII DIMM slot x2
z
Support DDRII 667/800 MHz DDRII memory modules
z
Expandable to 8 GB
Expansion Slot
z
32-bit PCI slot x 1
z
Mini-PCIE slot x1
Integrate IDE and
SATAII
z
One PCI IDE controller that supports PCI Bus Mastering,
ATA PIO/DMA and the ULTRA DMA 100/66 functions that
deliver the data transfer rate up to 100 MB/s
z
Support 2* internal serial ATAII 3 Gb/s connectors and 1*
external serial ATAII 3 Gb/s connector
LAN
z
Integrated Realtek RTL8111DL PCI-E Gigabit LAN
z
Support Fast Ethernet LAN function of providing
10Mb/100Mb/1000Mb Ethernet data transfer rate
Audio
z
ALC662 6-channel Audio Codec integrated
z
Audio driver and utility included
BIOS z
AMI 8MB DIP Flash ROM
Multi I/O
z
Serial port connector x1
z
VGA port connector x1
z
USB port connector x5 and USB header x2
z
ESATA Connector x1
z
RJ-45 LAN connector x1
z
PS/2 keyboard connector x1
z
Audio connector x3 (Line-in, Line-out, MIC)
z
Parallel port header x1
z
Serial port header x1 and RS232/422/RS485 header x1
z
LVDS header x1 and LVDS inverter x1
3
z
GPIO header x1
z
LPC header x1
z
Front panel audio header x1
z
SPDIF_OUT header x1
1-3 Layout Diagram
MIC-IN
VGA Port
Line-OUT
Line-IN
PS/2
Keyboard Port
COM Port
ESATA Port
RJ-45 LAN Connector
DC12V
Power Connector
USB Connectors
USB Connector
4
DDRII
DIMM Slot x2
Serial Port over
VGA Connector
PCI slot
Front Panel Header
Front Panel
Audio Heade
r
Power LED Heade
r
USB2/3 Header
CPU FAN1
Intel ICH8M Chipset
GPIO1 Header
ALC 662 Audio Codec
RJ-45 over
USB Connectors
USB Ports
LVDS1 Header
In
verter
1
JP5
JP2
Speake
r
Header
CDIN Header
Inter CPU
8 Mbit DPI Flash Rom BIOS
JP1
SFAN1
SPDIF_Out Header
IDE1 Harddis
k
Header
SATAII
Connector (1, 2)
Parallel Header
JP3
ESATA over
USB Connectors
DC12V Power
Connecto
r
PS/2 Keyboard
Connecto
r
Line-OUT
Line-IN
MIC-IN
SFAN2
COM2 JCOMP2
JCOM2
TX-RXCOM2
LPC1 Header
Mini-PCIE Slot
JCOMP1
JP4
Gigabit LAN Chip
Daughter Card Connectors
SATA Power
Connector
5
Jumper
Jumper Name Description
JP1 Inverter 12V/5V Select 3-pin Block
JP2 LVDS PVCC 5V/3.3V Select 3-pin Block
JP3 Mini PCI-E Power Dual 3.3V/VCC3.3V 3-Pin Block
JP4 K/B, USB Power On Function Setting 3-pin Block
JP5 USB 2/3 Power On Function Setting 3-pin Block
JCOMP1 Power RS232 Function Select 6 pin Block
JCOMP2 Power RS232 Function Select 6 pin Block
JCOM2 COM2 RS232/422/485 Function Select 6 pin Block
Connectors
Connector Name Description
COM1 Serial Port COM Connector 9-pin Connector
VGA Video Graphic Attach Connector 15-pin Female
USB from
US1,UL1;USB1
USB Port Connectors 4-pin Connectors
ESATA from
US1
Serial ATAII Connector 7-pin Connectors
LAN from UL1 RJ-45 LAN Connectors 8-pin Connectors
DC12V_IN DC Power Connector DC Jack
KB PS2 Keyboard Connector 6-pin Female
AUDIO2 Line Out /Line In /MIC Audio Connector 3-phone Jack
PWR1 Power out Connector 4-pin Connector
SATA1,SATA2 Serial ATAII Connectors 7-pin Connector
6
Headers
Header Name Description
AUDIO1 Front panel audio Headers 9-pin block
CDIN1 CD Audio-In Header 4-pin Block
SPDIF_OUT1 HDMI_SPDIF out header 2-pin Block
USB2/USB3 USB Headers 9-pin Block
SPEAK1 Speaker Header 4-pin Block
PWRLED1 Power LED 3-pin Block
JW_FP1
(PWR LED/ HD LED/
/Power Button /Reset)
Front Panel Header
(PWR LED/ HD LED/ /Power
Button /Reset)
9-pin Block
CPUFAN1,SFAN1/2 FAN Speed Headers 3-pin Block
IDE1 IDE Hard Disk Drive header 44-pin block
PARALLEL1 Parallel Port Header 25-pin Block
COM2 Serial Port Header 9-pin Block
TX-RXCOM2 RS 232/422/485 port headers 4-pin block
LVDS1 LVDS Header 32-pin Block
INVERTER1 LVDS Inverter Connector 7-pin Block
CN1; CN2 Jetway Daughter Card Connector 50-pin *2 Block
GPIO1 GPIO Header 10-pin Block
LPC1 LPC Header 11-pin Block
7
Chapter 2
Hardware Installation
2-1 Jumper Setting
(1) JP1(3-pin): Inverter1 5V/12V Select
1-2 closed
Inverte r 12V selected
2-3 closed
Inverter 5V select
JP1
JP1
133
(2) JP2 (3-pin): LVDS1 PVCC 5V / 3.3V Function setting
2-3 closed : LVDS1 PVCC 3.3V
JP2
1-2 closed: LVDS1 PVCC 5V
JP2
1
133
8
(3) JP3 (3-pin) : Mini PCI-E Power VCC3.3V/ Dual 3.3 V Function Select
2-3 closed ： MINI PCI-E
VCC= 3.3 V
JP3
1-2 closed ： MINI PCI-E
VCC= Dual 3.3V
1
(4) JP4 (3-pin):K/B, USB Power On Function Setting
2-3 closed:
KB/MS/USB POWER-ON Enabled
JP4
1-2 Closed:
KB/MS/USB POWER-ON Disabled (default)
1
JP4
1
3
3
9
(5) JP5(3-pin): USB2/3 Power On Function Setting
2-3 closed: USB 2/3Header POWER-ON Enabled
JP5
JP5
1-2 closed : USB 2/3 Header POWER-ON Disabled(default)
1
(6) JCOMP1(6-pin): COM1 Pin9 function select
3-4 closed : +12V
JCOM1P1
1
1-2 closed: RS232
1 1
5-6 closed : +5V
10
(7)JCOMP2(6-pin): COM2 Pin9 function select
3-4 closed : +12V
JCOMP2
1
1-2 closed: RS232
1
1
5-6 closed : +5V
(8) JCOM2(6-pin): COM2 Port RS232/485/422 Function Select
3- 4 closed : RS485
JP8
1
1-2 closed: RS232
11
5-6 closed : RS422
11
2-2 Connectors and Headers
2-2-1 Connectors
(1) I/O Panel Connector:
(2) Serial-ATA Port connector: SATA1/SATA2;
Serial-ATA Connect o rs
SATA2
SATA1
MIC-IN
VGA Port
Line-OUT
Line-IN
PS/2
Keyboard Port
COM Port
ESATA Port
RJ-45 LAN Connector
DC12V
Power Connector
USB Connectors
USB Connector
12
2-2-2 Headers
(1) Line-Out, MIC-In Header (9-pin): Front Panel Audio Header: AUDIO1
This header connects to Front Panel Line-out, MIC-In connector with cable.
Li n e-Out, MIC Headers
AUDIO
Pin 1
Lineout2-L
Lineout2-R
Sense-FB
Audio-GND
NC
NC
2
9
10
KEY
MIC2-L
NC
MIC2-R
(2) CD AUDIO-In Headers (4-pin): CDIN1
CDIN are the connectors for CD-Audio Input signal. Please connect it to
CD-ROM CD-Audio output connector.
CD Audio-In Hea ders
CDIN1
4 1
GNDCD-R CD-LGND
13
(3) HDMI-SPDIF Out header: SPDIF_OUT
HDMI_SPDIF Header
1
GND
2
HDMI_SPDIF_OUT
(4) USB Port Headers (9-pin): USB2/USB3
US B2 /3 He ader
VCC
Pin 1
-DATA
GND
+DATA
VCC
NC
-DATA
GND
+DATA
(5) Speaker connector: SPEAK1
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(6) Power LED: PWRLED1
The Power LED is light on while the system power is on. Connect the Power LED
from the system case to this pin.
14
SPEAK1
SPEAK
NC
NC
VCC
Pin 1
PWRLED1
Pin 1
VCC
GND
GND
(7) Front Panel Header: JW-FP1
System Case Connections
HDLED
RESET
VCC5
GND
PWRLED
PWR LED
PWRBTN
PWRBTN
GN
D
HDDLED
RSTSW
N
C
GND
JW_FP1
Pin 1
（8）FAN Speed Headers (3-pin): CPUFAN1, SFAN1/SFAN2
Pin1: GND
Pin2: +12V fan power
Pin3: Fan Speed
15
3
1
31
SYSFA N2
SYSFA N 1
1 3
CPUFA N 1
(9) Serial Port Connectors (9-Pin female): COM2
erial COM Port 9-pi n Block
Pin1
Pin6
DCD
Pin5
DSR
RXD
TXD
DTR
GND
RT
S
CTS
R
I
(10) RS232/422/485 Header: TX-RXCOM2
TX-RX Header
TX-RXCOM2
Pin 1
RXDP
TXDN
TXDP
3
RXDN
2
4
1
6
(11) LVDS Headers（32 Pin）: LVDS1
Pin NO. Pin Define Pin NO. Pin Define
Pin 1
NC
Pin 2
NC
Pin 3
NC
Pin 4
NC
Pin 5
NC
Pin 6
NC
Pin 7
NC
Pin 8
NC
Pin 9
NC
Pin 10
NC
Pin 11
LVDS_DDC_DATA
Pin 12
LVDS_DDC_CLK
Pin 13
GND
Pin 14
GND
Pin 15
GND
Pin 16
GND
Pin 17
NC
Pin 18
NC
Pin 19
LVDS_CLKAP
Pin 20
LVDS_CLKAN
Pin 21
LVDSA_DATAP2
Pin 22
LVDSA_DATAN2
Pin 23
LVDSA_DATAP1
Pin 24
LVDSA_DATAN1
Pin 25
LVDSA_DATAP0
Pin 26
LVDSA_DATAN0
Pin 27
PVDD
Pin 28
PVDD
Pin 29
PVDD
Pin 30
PVDD
Pin 31
GND
Pin 32
GND
1
7
Pin 1
LVDS1
Pin 2
(12)LVDS Inverter headers: Inverter1
Pin 1 and pin2: VCC of inverter
Pin3, pin4 and pin6: GND
Pin5: Backlight
Pin7: Brightness
Pin 1
VCC
VCC
GND
GND
Backlight
GND
Brightness
18
(13) GPIO Header (10-pin): GPIO1
GPIO1 Header
GPIO 1
9
GPIO_10
GND
GPIO_11
GPIO
_
12
GPIO_13
GPIO
_
14
GPIO_64
GPIO
_
6
3
2
Pin 1
10
GPIO
_
6
5
VCC
(14) LPC Connector (12-pin): LPC1
LPC 1 Connector
11
LPC_CLOCK
VCC3
LFRAME-
LPCRST-
LAD3
GND
VCC
NC
2
Pin 1
12
LAD2
LAD1
GN
D
LAD0
19
Chapter 3
Introducing BIOS
Notice! The BIOS options in this manual are for reference only. Different
configurations may lead to difference in BIOS screen and BIOS
screens in manuals are usually the first BIOS version when the board is
released and may be different from your purchased motherboard.
Users are welcome to download the latest BIOS version form our
official website.
The BIOS is a program located on a Flash Memory on the motherboard. This program
is a bridge between motherboard and operating system. When you start the computer,
the BIOS program will gain control. The BIOS first operates an auto-diagnostic test
called POST (power on self test) for all the necessary hardware, it detects the entire
hardware device and configures the parameters of the hardware synchronization.
Only when these tasks are completed done it gives up control of the computer to
operating system (OS). Since the BIOS is the only channel for hardware and
software to communicate, it is the key factor for system stability, and in ensuring that
your system performance as its best.
In the BIOS Setup main menu of Figure 3-1, you can see several options. We will
explain these options step by step in the following pages of this chapter, but let us first
see a short description of the function keys you may use here:
•
Press <Esc> to quit the BIOS Setup.
•
Press ↑↓←→ (up, down, left, right) to choose, in the main menu, the option you
want to confirm or to modify.
•
Press <F10> when you have completed the setup of BIOS parameters to save
these parameters and to exit the BIOS Setup menu.
•
Press Page Up/Page Down or +/– keys when you want to modify the BIOS
parameters for the active option.
20
3-1 Entering Setup
Power on the computer and by pressing <Del> immediately allows you to enter Setup.
If the message disappears before your respond and you still wish to enter Setup,
restart the system to try again by turning it OFF then ON or pressing the “RESET”
button on the system case. You may also restart by simultaneously pressing <Ctrl>,
<Alt> and <Delete> keys. If you do not press the keys at the correct time and the
system does not boot, an error message will be displayed and you will again be asked
to
Press <Del> to enter Setup
3-2 Getting Help
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of
the screen.
Status Page Setup Menu/Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use
and the possible selections for the highlighted item. To exit the Help Window, press
<Esc>.
3-3 The Main Menu
Once you enter AMI ® BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will
appear on the screen. The Main Menu allows you to select from fourteen setup
functions and two exit choices. Use arrow keys to select among the items and press
<Enter> to accept or enter the sub-menu.
21
Figure 3-1
Standard BIOS Features
Use this Menu for basic system configurations.
Advanced BIOS Features
Use this menu to set the Advanced Features available on your system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and optimize your
system’s performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
Power Management Setup
Use this menu to specify your settings for power management.
PnP/PCI Configurations
Use this menu to specify your settings for PnP and PCI configurations.
PC Health Status
This entry shows your PC health status.
22
Miscellaneous Control
Use this menu to specify your settings for Miscellaneous Control.
Load Optimized Defaults
Use this menu to load the BIOS default values these are setting for optimal
performances system operations for performance use.
Load Standard Defaults
Use this menu to load the BIOS default values for the minimal/stable performance
system operation
Set Supervisor Password
Use this menu to set supervisor password.
Set User Password
Use this menu to set user password.
Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
3-4 Standard BIOS Features
The items in Standard CMOS Setup Menu are divided into several categories. Each
category includes no, one or more than one setup items. Use the arrow keys to
highlight the item and then use the <PgUp> or <PgDn> keys to select the value you
want in each item.
23
System Date
The date format is <day><month><date><year>.
Day
Day of the week is from Sun to Sat, determined by BIOS. Read-only.
Month
The month is from Jan. through Dec.
Date
The date from 1 to 31 can be keyed by numeric function keys.
Year
The year depends on the year of the BIOS.
System Time
The time format is <hour><minute><second>.
SATA 1/SATA 2/ESATA
IDE Channel Master/Slave
While entering setup, BIOS auto detects the presence of harddisk devices. This
displays the status of auto detection of harddisk devices.
Type:
The optional settings are: Not Installed; Auto; CD/DVD and ARMD.
LBA/Large Mode:
The optional settings are Auto; Disabled.
Disabled: disables LBA mode.
24
Auto: enables LBA Mode if the devices support it and the device is not already
formatted with LBA Mode disabled.
Block (Multi-Sector Transfer):
The optional settings are: Disabled and Auto.
Disabled: The Data transfer from and to the device occurs one sector at a time.
Auto: The Data transfer from and to the device occurs multiple sectors at a time if the
device supports it.
PIO Mode: the optional settings are:
Auto, 0, 1, 2, 3 and 4.
DMA MODE:
the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
S.M.A.R.T.:
This option allows you to enable the HDD S.M.A.R.T Capability
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Enabled.
32 Bit Data Transfer:
the optional settings are: Disabled and Enabled.
3-5 Advanced BIOS Features
25
Virus Warning
The selection Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempt to write data into
this area, BIOS will show a warning message on screen and alarm beep.
Disabled
(default) No warning message to appear when anything attempts to
access the boot sector or hard disk partition table.
Enabled
Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access
the boot sector of hard disk partition table.
Quick Power On Self Test
This item allows BIOS to skip certain tests while booting. This will decrease the time
needed to boot the system. The optional settings: Disabled; Enabled.
Boot Up NumLock Status
The default value is On.
On
(default)
Keypad is numeric keys.
Off
Keypad is arrow keys.
APIC Mode
Use this item to include ACPI APIC table pointer to ESDT pointer list. The optional
settings are: Disabled; Enabled.
MPS Version Control for OS
This option is only valid for multiprocessor motherboards as it specifies the version of
The Multiprocessor Specification (MPS) that the motherboard will use.
Quiet Boot
The optional settings: Disabled; Enabled.
Disabled: Displays normal POST messages. Enabled: Displays OEM logo instead of
POST messages.
26
3-5-1 CPU Feature
Hyper Threading Technolegy
Enabled for Windows XP and Linux4(OS optimized for Hyper Threading Technology)
and disabled for other OS (OS not optimized for Hyper –Threading Technology)
Limit CPU MaxUal
The optional settings are: Disabled; Enabled.
Execute-Disable Bit Capabill
The optional settings are: Disabled; Enabled. When disabled, force the XD feature
Flag to always return 0.
27
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the
chipset registers. These registers control most of the system options in the computer.
DRAM Timing Settings by SPD
The optional settings are: Disabled; Enabled.
Initate Graphic Adapter
The optional settings are: 1GD; PCIE/IGD. Select which graphic controller to use as
the primary boot device.
Internal Graphics Mode Select
Use this item to select the amount of system memory used by the internal graphics
device. The optional settings: Disabled; Enabled, 4MB. Enabled, 8MB.
DVMI Mode Select
The optional value is: Fixed Mode; DVMT Mode.
DVMI/FIXED Memory
28
The optional values are: 128MB; 256 MB; Maximum DVMT.
LVDS Suppor
t
The optional settings are: Disabled; Enabled.
3-7 Integrated Peripherals
PWR Status after PWR Failure
The optional settings are: Always off; Always on; Former Status.
29
3-7-1 Onboard SATA Function
30
3-7-2 Onboard Device Function
High Definition Audio
This item allows you to decide to auto /disable the chipset family to support HD Audio.
The settings are: Auto, Disabled.
Onboard LAN Controller
The optional settings are: Enabled; Disabled.
Onboard LAN Boot ROM
The optional settings are: Enabled; Disabled.
Mini PCIE Device
The optional settings are: Enabled; Disabled.
Mini PCIE Wireless Single
The optional settings are: Enabled; Disabled.
USB 2.0 Operation Mode
The settings are: FullSpeed; HiSpeed.
31
USB Host Controller/USB 2.0 Function / Keyboard Legacy/Mouse Legacy
/Storage Legacy Support
Select enabled if your system contains a Universal Serial Bus (USB) controller and
you have a USB mouse /keyboard/USB storage device. The settings are: Enabled,
Disabled.
3-7-3 Onboard Super IO Function
Serial Port 1 Address
The optional settings
are：Disabled, 3F8/IRQ4, 3E8/IRQ4，2E8/IRQ3.
Serial Port 2 Address
The optional settings
are：Disabled, 2F8/IRQ3, 3E8/IRQ4，2E8/IRQ3.
Serial Port 2 RS485 Select
The optional settings
are：Disabled(RS232); Enabled(RS485)
Parallel Port Address
Use this item to allow BIOS to select parallel port base adresses
32
The optional settings are: Disabled; 378; 278; 3BC
Parallel Port Mode
The optional settings are: Normal; Bi-Directional; ECP; EPP; ECP & EPP.
Watchdog Timer Select
This item is used to activate the watchdog function. The optional settings are: Enabled;
Disabled.
When set as Enabled, The following subitems shall appear:
WatchDog Timer Val: User can typing a numbering the range of 10 to 255.
WatchDog Timer Unit: The optional settings are: Sec.; Min. .
3-8 Power Management Setup
The Power Management Setup allows you to configure your system to most
effectively save energy saving while operating in a manner consistent with your own
style of computer use.
33
ACPI Suspend Type
Users can select the ACPI state used for system suspend. The optional settings are:
S1(POS); S3(STR).
Video Power Down Mode
The optional settings: Disabled; Standby; Suspend.
Suspend Time out
Use this item to select the specified time for system to go into suspend. The optional
settings are: Disabled;1Min,2 Min;4 Min;8 Min;10 Min;20 Min;30 Min;40 Min;50 Min;60
Min.
Power Button Mode
Use this item to go into On/Off or Suspend when power button is pressed.
PS2 KB/MS Wake-Up from S3-S5; Wake-Up by PCI Card; Wake-Up by
Ring;Wake-Up by LAN from S3-S5;Wake-Up by USB from S3(S4);Resume by
Alarm.
User can set them as Enabled or Disable for to enable or disble respective functions.
EUP Function
The optional settings are: Auto; Disabled.
3-9 PnP/PCI Configurations
IRQ Resources
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity
of the selected IRQ always awakens the system.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some
non-standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
34
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status.
This is only available if there is Hardware Monitor onboard.
35
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature
over this setting the system will auto shutdown to protect CPU.
CPU Thermal Throttling
The optional settings are: Disabled; Enabled. When it is set as Enabled user could set
value for CPU Thermal-Throttling Temp.; CPU Thermal-Throttling Duty and CPU
Thermal-Throttling Beep.
Smart Fan Configuration
Press Enter to set certain values for the following three items: CPUFAN Smart Mode ,
SYSFAN1 Smart Mode and SYSFAN2 Smart Mode to set respectively for value in
Full-Speed Temp.; Idle Temp. and Idle-Speed Duty .
+5V OUT/+12V OUT/Vcc3V OUT
Use this item to select a value for +5V OUT/+12V OUT/Vcc3V OUT from the optional
setting range..
3
6
CPU Temperature/ System Temperature/ /CPUFAN/ SYSFAN1/SYSFAN2 Speed/
Vcore/ /NB1.05V/5VSB/VDIMM/ +5V/+12V/5 /Vcc3V/3VSB/VBat /
This will show the CPU/FAN/System voltage chart and FAN Speed, etc.
3-11 Miscellaneous Control
Spread Spectrum
The optional settings are: Enabled; Disabled.
Linear PCIEX Clock
The optional settings are from 100 to 200.
DRAM Clock at Next Boot
This item allows you to set DRAM clock. The optional settings are: Auto; 667MHz;
800MHz
Host/PCI Clock at Next Boot
The optional settings are from 166 to 600.
VDIMM Select
3
7
Use this item to select a voltage value for DIMM. The optional value is from
1.80V(Default) to 1.95V.
3-12 Password Setting
You can set either supervisor or user password, or both of them. The differences
are:
Supervisor password: Can enter and change the options of the setup menus.
User password: Can only enter but do not have the right to change the options
of the setup menus. When you select this function, the
following message will appear at the center of the screen to
assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The
password typed now will clear any previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and press
<Enter>. You may also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the
password. A message will confirm that the password will be disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you
try to enter Setup. This prevents an unauthorized person from changing any part of
your system configuration.
Additionally, when a password is enabled, you can also require the BIOS to request a
password every time your system is rebooted. This would prevent unauthorized use
of your computer.
You determine when the password is required within the BIOS Features Setup Menu
and its Security option. If the Security option is set to “System”, the password will be
required both at boot and at entry to Setup. If set to “Setup”, prompting only occurs
when trying to enter Setup.
38
3-13 Load Optimized /Standard Defaults
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> loads the default values that are factory settings for optimal
performance system operations.
Load Standard Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> loads the default values that are factory settings for stable
performance system operations.
3-14 Save & Exit Setup/ Exit Without Saving
Save and Exit Setup
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> save the values you made previously and exit BIOS setup.
39
Exit Without Saving
When you press <Enter> on this item, you get a confirmation dialog box with a
message similar to:
Pressing <OK> to leave BIOS setting without saving previously set values.
Loading...