JETWAY 194 Series User's Manual Operation And Maintenance Instructions

All Information in this manual may change from time to time without prior notice.

LCD Monitor Series

19.0 TFT Active Matrix LCD Panel
194X Series User’s Manual

19.0 TFT Active Matrix LCD Panel User Manual

English 2

Table of Content

Table of Content.................................................................................. …2

Safety Instructions.............................................................................. …3

View of Monitor ....................................................................................... 4

Unpacking................................................................................................ 6

Warning.................................................................................................... 6

Cleaning Notes........................................................................................ 7

Precaution ...............................................................................................7

Features ................................................................................................... 7

Hardware Installation.............................................................................. 8

Hardware Installation Step by Step ....................................................... 9

How to Remove Quick-Stand of Monitor.............................................10

Monitor Setup Button ........................................................................... 11

Troubleshooting.................................................................................... 12

OSD (On-Screen Display) Menu (PC Mode)........................................ 12

Display Mode......................................................................................... 19

Specification.......................................................................................... 20

19.0 TFT Active Matrix LCD Panel User Manual

English 3

Safety Instructions

1. Please read these safety instructions carefully.

2. Please keep this User‘s Manual for later reference.

3. Please disconnect this equipment from connecter before cleaning. Don‘t use

liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for

cleaning.

4. Make sure the voltage of the power source when you try to connect the

equipment to the power outlet.

5. All cautions and warnings on the equipment should be noted.

6. Never pour any liquid into opening, this could cause fire or electrical shock.

7. Never open the equipment. For safety reason, the equipment should only be

opened by qualified service personnel.

8. If one of the following situations arises, get the equipment checked by a service

personnel :

a. Liquid has penetrated into the equipment.

b. The equipment has been exposed to moisture.

c. The equipment has not work well or you can not get it work according to

user‘s manual.

d. The equipment has dropped and damaged.

d. If the equipment has obvious sign of breakage.

9. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 40°C, IT MAY
DAMAGE THE EQUIPMENT.

19.0 TFT Active Matrix LCD Panel User Manual

English 4

View of Monitor

Front View Type 1 (1)

Front View Type 2 (2)

19.0 TFT Active Matrix LCD Panel User Manual

English 5

View of Monitor

Back View (3)

Side View (4)

19.0 TFT Active Matrix LCD Panel User Manual

English 6

Unpacking

Thank you for your purchase. Please first check the following package content of the

19” LCD monitor. Contact your dealer or store where you purchased the LCD monitor

if anything is missing.

19” TFT LCD Monitor

External Univ15 pin

D-sub

(RGB Analog) input

signal cable

Power Cord

Audio Cable

with

Stereo Phone Jack

Quick Start Guide

CD User’s Manual

Quick Stand

Warning

1. Make sure that the system power is turned off.

2. Plug the signal cable to the signal connector at the rear of PC.

3. Plug power cord to the jack at the rear of LCD monitor.

4. Turn on the computer and the monitor.

5. For the best display quality, we suggest that you set the resolution as shown

page 19 (Display Mode).