JETWAKE B200 C1 AB User Manual

Electric Surfboard

(USER MANUAL)

VERSION 19-JW001

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

PLEASE KEEP THIS MANUAL AT A SAFE PLACE AND HAND IT OVER TO A NEW OWNER IF YOU SELL THE VESSEL.

Copyright 2019, All rights reserved

User's Guide

INTRODUCTION

Copyright 2019, All rights reserved

In addition to our passion for technology, the JETWAKE ™ team constantly pursues perfection to ensure that all products are new and fun.

"Pleasure for users", this is our vision.

We are not afraid to try new ideas and overcome the limitations in order to experience the greatest joy.

By changing our common sense as an innovative product, we will create a new culture of marine leisure sports.

JETWAKE ™ Electric Surfboard designs and manufactures all parts in Korea.

We use JETWAKE ™ to produce the best quality production technology using only the best materials and parts currently produced in

Korea.

Due to its own production, JETWAKE ™ ensures maximum precision and efficient production.

It is eco-friendly product because it does not pollute by using battery and motor.

With cutting-edge expertise, engineers have been putting the JETWAKE ™

We developed a stable mechanical battery that does not explode and a BLDC motor with efficiency of 90% or more.

The boards use BLDC motors to keep quiet and rechargeable batteries easy to replace and continue to use.

It is composed of three modules of battery pack, board and water jet propulsion, and is very convenient for A / S.

Self-repair is possible through easy operation and basic knowledge.

The greatest benefit of JETWAKE ™ is that the software can be upgraded continuously, and we promise to continually improve and

improve the product after purchase.

Check the website (www.jetwake.co.kr) regularly.

In order to enjoy JETWAKE ™ for a long time, we provide the following information.

INTRODUCTION

This manual will help you to operate the JETWAKE ™ electric surfboard 'B200' safely and easily.

The B200 provides information on the name of each part, its description, precautions, how to use it, system and operation, maintenance,
and maintenance.

Please read it carefully before you use it and familiarize yourself with a lot of information about 'B200'.

Never use the product at high waves and low depths (50cm or less), and be sure to wear protective gear (helmets, life jackets, etc.) for
safe use.

This user's guide does not contain detailed maintenance or repair instructions. If you experience a problem with the product, stop using
it.

Contact your JETWAKE ™ manufacturer (headquarters) or your dealer. If you have a maintenance manual, do the following:

Maintenance and repair of JETWAKE ™ electric surfboards can only be done by qualified and trained personnel.
JETWAKE ™ assumes no liability for any problems caused by disassembly, maintenance or repair.

Use the product safely through periodic safety checks.

You should be aware that parts will wear out over time.
In particular, some parts, such as battery packs and impellers, need to be replaced at least once a year.

In addition, it may be severely damaged depending on the wrong operation and handling.
It is not compatible with other products. Do not use parts manufactured arbitrarily.

Always use it in a safe place and at a safe speed and course according to correct usage.

You must comply with all national laws while using JETWAKE ™.

Keep this manual in a safe place. If you are an existing owner, please hand over the manual to the new owner.

JETWAKE ™ Electric Surfboard 'B200'

JETWAKE Co., Ltd.

Electric Surfboard

Model : B200

Size : 1800 x 700 x 130 mm

Weight : Board 15 kg/Controller10 kg/Battery 20kg

Run time: 30~45 min

Operating temperature : 5~35℃
Storage temperature : 0~40℃

Speed: 25~40 km/h

* Test rider : height 184cm, weight 80kg -> speed 30kmh
* Test rider : height 170cm, weight 64kg -> speed 40kmh

* Change speed and use time based on user's weight

* The operation of the product is only required when the

board controller and the battery pack are combined,
and the charge of the product is possible when the
battery pack and the charger are connected.

Wireless Controller

Model : B200-C1-AB

Size : 118 x 67 x 22 mm

Weight :122g

Operating temperature : 5~35℃

Storage temperature : 0~40℃

B200 SET

1 2

1. Board

2. Propellent

3. Battery Pack

4. Wireless Controller

5. Power Charger

6. Magnet Switch (with leash)

3

1 PC

1 PC

1 PC

1 PC

1 PC

1 PC

4

5

6

1. Board

1-6

1-3

1-1. Board body

1-2. Battery Room

1-3. Fasteners – Locking Receptacle

1-4. Drain Plug

1-5. Foot strap1

1-6. Foot strap2

1-2

1-5

1-1

1-4

2. Controller

2-5

2-6

2-1. Jet Nozzle

2-2. Guide Vane

2-3. Jet Tunnel

2-4. BLDC Motor

2-5. Main Controller

2-6. Connector (+)

2-7. Liquid Tight Threaded Vent Plug

2-7

2-4

2-3

2-2

2-1