Jet Tools JPS-10TS User Manual
10" PROSHOP™ SAW
The new JET® ProShop Table Saw is driven by 1-3/4 HP motor, features a fully enclosed
cabinet for highly efficient dust collection and a built-in arbor lock. Also, included is the
new ProShop fence system for precise cutting results and added versatility. Available
with either sheet metal or cast iron table extension wings.
STOCK NO. 900494
10M 07/07
©2007 WMH TOOL GROUP, Inc. All Rights Reserved.
jettools.com
Industrial
Paddle
Style
Switch
Heavy-Duty
Steel Stand
10" PROSHOP™ SAW
Arbor
Lock
Exclusive
ProShop
Fence
Steel
Extension
Wings
10" PROSHOP™ SAW
• EXCLUSIVE 30" ProShop fence system with T-square design
• Integrated arbor lock allows for quick, safe and easy blade changes
• Heavy-duty cast iron table with T-style miter slot provides large flat work
surface and increased cross cut capacity
• Enclosed cabinet with EXCLUSIVE leg stand design for easy assembly
• 4" dust port for increased dust collection efficiency
• Rigid, left tilting cast iron trunnion
• Powder coated paint for a long-lasting, chip-resistant finish
• Steel extension wings for added workpiece support
708480K 708481K 708482K 708483K
PROSHOP™SAW
STEEL WINGS
30" RIP
708485K 708486K 708487K 708488K
PROSHOP™SAW
STEEL WINGS
30" RIP
WITH XACTA LIFT
PROSHOP™SAW
STEEL WINGS
52" RIP
PROSHOP™SAW
STEEL WINGS
52" RIP
WITH XACTA LIFT
PROSHOP™SAW
CAST IRON WINGS
30" RIP
PROSHOP™SAW
CAST IRON WINGS
30" RIP
WITH XACTA LIFT
PROSHOP™SAW
CAST IRON WINGS
52" RIP
PROSHOP™SAW
CAST IRON WINGS
52" RIP
WITH XACTA LIFT
STOCK NUMBER 708480K
Model Number JPS-10TS
Net Weight (lbs.): 285
Blade Diameter (in.): 10
Arbor Diameter (in.): 5/8
Arbor Speed (RPM):
Maximum Depth of Cut (in.):
Maximum Depth of Cut at 45 Degrees (in.):
Maximum Rip Right of Blade (in.):
Maximum Rip Left of Blade (in.):
Table in Front of Saw Blade at Maximum Depth of Cut (in.):
Maximum Width of Dado (in.):
Maximum Diameter of Dado (in.):
Table Height (in.): 34-3/4
Table Size with Standard Extension (L x W/in.): 27 x 44
Table Size without Extension (L x W/in.): 27 x 20
Dust Port Diameter (OD/in.): 4
Motor HP:
Motor Phase:
Motor Amps:
Motor Voltage:
Prewired: 115
3600
3-1/8
2-1/8
30
12
10-1/2
13/16
8
1-3/4HP
1Ph
17/9
115/230V
jettools.com
Loading...