model X-35C
Door-type single tank low-temp convertible
X-35C cleans your dishes, glassware, silverware and utensils in less than 90 seconds!
This model is excellent for small restaurants, fast food operations, institutions, nursing homes, etc.
• Just the push of one button fills the wash tank, fully automatically!
• No need for any booster heater
• New and improved wash arm design made entirely of stainless steel
provides you with better cleaning power and the most effective
wash spray pattern
• Highest quality fabrication using the most advanced machinery will
ensure long-life and increased durability
• The only machine you will need to satisfy any type of install:
Corner or in-line
TECHNICAL FEATURES
• Capacities
- Racks per hour 37
- Wash tank (Gal.) 1.6
• Wash motor 1 HP
• Water consumption
- Gal. per hour 62
- Gal. Per rack 1.6
• Temperature ºF
- Wash & Rinse 140ºF
• Time cycle (sec.)
- Wash 45
- Dwell 12
- Rinse 28
- Total cycle time 85
STANDARD FEATURES
• Automatic dump and fill
• Balanced three door lift system
• Field convertible for any usage
• 1 HP drip-proof pump motor
• Door safety switches
• Top-mounted splash-proof controls
• Interchangeable upper and lower arms
• Stainless steel front enclosure panel
• Detergent/chemical connections
• Common utility connections
• Reliable mechanical-type cam timer
• Cycle counter for convenience
• Central inside sump with built-in
scrap accumulator
model X-35C
CONTROL PANEL
Top cover is easily removed providing quick
access to all essential electrical components.
FRONT
8 3/8"
25 5/8"
23 1/2"
75 3/4"
65" 65"
31 5/8"
STRAINER
Built in waste strainer slides out for
instant cleaning.
7 1/2" 8 1/2"
Water in
1/2" NPT
140F
min 20 PSI
max 45PSI
59 3/4"
27"
PUMP AND MOTOR
The 1 HP pump provides high pressure
re-circulating wash. The motor is drip-proof
wired through a magnetic contact and has
thermal overload protection.
BACK SIDE VIEW
Power in
110 V
20 Amps
16 1/2"
INNER WASH TANK
Stainless steel wash and rinse arms are
interchangeable and easily removed for
cleaning. Ultra fast water drainage with
inside rear sump.
33 1/8"
9 1/8"
Legs can be adjusted
3/4"
from 1/2" to 2"
9 1/8"
6 1/2"
Drain outlet
2" Gravity
UTILITIES
ELECTRICAL: Machine connection / Machine Load Amps — Voltage 115/60/1, Amps 13.0
HOT WATER: 1/2” NPT 140ºF Hot Water Connection / Flow Pressure 25 PSI
DRAIN: 2” I.P.S
ANSI/NSF-3
JET-TECH SYSTEMS CORP.
TEL: (514) 737-9701
TOLL FREE: (888) 275-4538
jet-tech.com
In line with our continuing policy on research and product development, we reserve the right to alter specifications without notice.
FAX: (514) 342-3854
TOLL FREE FAX: (877) 453-8832
sales@jet-tech.com
27 1/4"