Jet Tech PW-48TD User Manual
INDUSTRIAL DIVISION
POT, PAN & UTENSIL WASHER
MODEL PW-48TD
Three door pass-thru or corner operation:
The extra third door allows for easy access during operation and
maintenance of the machine. For wash and rinse operations, this model
is equipped with a 42” diameter rotating table. All three door openings
are 40 1/2” W. x 28” H.
CONSTRUCTION:
•
Pass thru or corner design
•
Third door for easy access inside the machine
•
#14 gauge stainless steel construction
•
Stainless steel control panel enclosure
•
Adjustable stainless steel sanitary legs
•
Removable scrap trays
•
Stainless steel machine base
•
Stainless steel door-cable pulley supports
•
42” diameter roto-table
•
Stainless steel wash piping and nozzles
•
Stainless steel internal rinse piping with brass nozzles
•
12” diameter vent opening
FEATURES:
•
10 HP wash pump to deliver 280 gpm at 40 psi
•
Wash and rinse pressure and temperature gauges
•
Steam injector tank heat
•
Steam pressure gauge and shut-off valve for tank heat
•
Vacuum breaker and strainer for rinse water
•
Tank drain and overflow
•
Machine pre-wired and tested
•
Single point electrical connection
CAPACITY:
•
18 batches per hour
•
63 gallon (U.S.) wash tank
•
42” diameter x 28” H. internal work area
CONTROLS:
•
Automatic wash water (tank) temperature control
•
Complete automatic wash drain and rinse cycles
•
Adjustable wash, drain and rinse cycles
•
“Push-stop” button for emergency shut down
•
Capability of continuous (manual) wash or rinse cycle
UTILITY REQUIREMENTS:
•
Hot water: 14 gpm @ 20 psi / Consumption: 108 gph
•
Tank heat steam: 80 lb./hr. @ 15 psi
•
Electrical:
460v-3ph-60hz, 8kw, 16amp
230v-3ph-60hz, 8kw, 32amp
208v-3ph-60hz, 8kw, 36amp
OPTIONAL EQUIPMENT:
•
Steam coil tank heat
•
Powered vent fan
•
Electric tank heat (user to provide a separate fused disconnect)
•
Rinse water temperature booster; steam heated or electric
to raise incoming rinse water temperature from 120º
or 140º F to 180º F
•
Racks:
-
General utility basket
-
Utensil basket
-
Sheet pan rack
-
40” diameter rack
-
Cover for 40” rack
-
Assorted pan rack
MODEL PW-48TD
INDUSTRIAL DIVISION
JET TECH SYSTEMS CORP.
TEL: (514) 737-9701
TOLL FREE: (888) ASK 4 JET
FAX: (514) 342-3854
Engineering Offices (CENTPAR INDUSTRIES):
N.J. TEL: (908) 322-6150
FAX: (908) 322-6110
www.jet-tech.com
e-mail: info@jet-tech.com
In line with our continuing policy on research
and product development, we reserve the right
to alter specifications without notice.
Loading...