Jet Tech PW-36TD User Manual

INDUSTRIAL DIVISION
POT, PAN & UTENSIL WASHER
MODEL PW-36TD
Three door pass-thru or corner operation:
The extra third door allows for easy access during operation and maintenance of the machine. For wash and rinse operations, this model is equipped with top and bottom Roto-Spray assemblies.
CONSTRUCTION:
Pass-thru and corner design
Third door for easy access inside the machine
#14 gauge stainless steel construction
Stainless steel control panel enclosure
Removable scrap trays
Stainless steel machine base
Stainless steel door-cable pulley supports
Stainless steel wash piping and nozzles
Stainless steel internal rinse piping with brass nozzles
FEATURES:
5 HP wash pump to deliver 90 gpm at 40 psi
Top and bottom rotating stainless steel wash and rinse arms
Wash and rinse pressure and temperature gauges
Steam injector tank heat
Steam pressure gauge and shut-off valve for tank heat
Vacuum breaker and strainer for rinse water
Tank drain and overflow
Machine pre-wired and tested
Single point electrical connection
CAPACITIES:
19 batches per hour
37 gallon (U.S.) wash tank
28” W x 28” D x 28” H internal work area
CONTROLS:
Automatic wash water (tank) temperature control
Complete automatic wash, drain and rinse cycles
Adjustable wash, drain and rinse cycles
“Push-stop” button for emergency shut down
Capability of continuous (manual) wash or rinse cycle
UTILITY REQUIREMENTS:
Hot water: 13 gpm @ 20 psi / Consumption: 82 gph
Tank heat steam: 60 lb./hr. @ 15 psi
Electrical: 460v-3ph-60hz, 4kw, 7amp 230v-3ph-60hz, 4kw, 13amp 208v-3ph-60hz, 4kw, 15amp
OPTIONAL EQUIPMENT:
Steam coil tank heat
Powered vent fan
Electric tank heat (user to provide a separate fused disconnect)
Rinse water temperature booster; steam heated or electric to raise incoming rinse water temperature from 120º F or 140º F to 180º F
Racks:
-
General utility basket
-
Utensil basket
-
Sheet pan rack
-
Hold-down covers
-
Counter pan rack
MODEL PW-36TD
INDUSTRIAL DIVISION
JET TECH SYSTEMS CORP.
TEL: (514) 737-9701 TOLL FREE: (888) ASK 4 JET FAX: (514) 342-3854
Engineering Offices (CENTPAR INDUSTRIES): N.J. TEL: (908) 322-6150 FAX: (908) 322-6110
www.jet-tech.com e-mail: info@jet-tech.com
In line with our continuing policy on research and product development, we reserve the right to alter specifications without notice.
Loading...