Page 1
FPG-2 DBC
®
GRINDER DBC
ILLUSTRATED PARTS CATALOG
Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
are subject to change without notice.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
36777.0000A 04/04 ©2004 Bunn-O-Matic Corporation www.bunnomatic.com
Page 2
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY
Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:
1) All equipment other than as specified below: 2 years parts and 1 year labor.
2) Electronic circuit and/or control boards: parts and labor for 3 years.
3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.
4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis:
parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.
These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it
will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing
within the applicable warranty period. This warranty does not apply to any equipment, component or part that
was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration,
improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned
on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217)
529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN,
shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior
authorization from BUNN that the defective equipment is under warranty.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN
are not authorized to make modifications to this warranty or to make additional warranties that are binding on
BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and
should not be relied upon.
If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its
exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts
and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective
components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace
the equipment or refund the purchase price for the equipment.
THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE
OF THIS EQUIPMENT , WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, A T BUNN’S
SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.
In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales,
loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute
equipment, facilities or services, or any other special, incidental or consequential damages.
2
36777 041604
Page 3
TABLE OF CONTENTS
TITLE
PAGE NO.
Electrical and Operating Controls............................................................................................................... 10
Hopper and Lid Assembly ............................................................................................................................ 6
Housing and Panels ..................................................................................................................................... 4
Motor, Burr Housing and Components ...................................................................................................... 12
Numerical Index......................................................................................................................................... 14
Solenoid and Components........................................................................................................................... 8
3
36777 041604
Page 4
BUNN
®
HOUSING AND PANELS
FPG-2 DBC
2
GRINDER DBC
®
3
1
4
5
6
9
7
8
10
P2949.65
4
36777 041604
Page 5
HOUSING AND PANELS
ITEM PART NO. QTY. DESCRIPTION
1 20617.1014 1 Panel W/Decal, Rear (Includes item 2)
01315.0000 4 Screw, Truss Head #8-32 x .38".001
00917.0000 4 Fastener, “J” Type #8
2 36706.0000 1 Schematic, Electrical
3 36455.0000 1 Housing, Hopper (Also order item 4)
01311.0000 4 Screw, Truss Head #8-32 x .25"
4 29975.0000 1 Membrane Switch
5 20585.0001 1 Support, Motor
02308.0000 3 Screw, Pan Head Serrated #8-32 x .38"
6 36512.0000 1 Outlet Funnel
7 05839.0000 2 Rail, Funnel
02308.0000 4 Screw, Pan Head Serrated #8-32 x .38"
8 20591.1003 1 Housing W/Decals, Base (Includes item 8)
9 20545.0000 1 Decal, Warning - Electrical
10 20704.0000 2 Pad, Base W/Adhesive Back
5
36777 041604
Page 6
BUNN
®
7
HOPPER AND LID ASSEMBLY
FPG-2 DBC
1
2
3
4
8
5
6
P1024
6
36777 041604
Page 7
HOPPER AND LID ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
- 27076.1000 1 Hopper/Lid Assy (Includes items 1 thru 8)
1 00725.0000 2 Knob, Hopper Lid
2 26855.1000 1 Lid & Hinge Assy W/ Decals, Hopper (Includes item 3)
02328.0000 3 Screw, Pan Head Locking #6-32 x .38"
3 05876.0000 2 Decal, Caution
4 25997.0000 1 Divider, Hopper
01317.0000 2 Screw, Truss Head #8-32 x .50"
00991.0000 2 Nut, Elastic Lock #8-32
5 25994.0000 1 Brace, Divider
01315.0000 2 Screw, Truss Head #8-32 x .38"
01516.0000 2 Washer, Nylon-Retainer #8 x .312" O.D.
6 20751.0001 1 Hopper
01315.0000 4 Screw, Truss Head #8-32 x .3/8"
01516.0001 8 Washer, Nylon-Retainer #8 x .50" O.D.
00917.0000 4 Fastener, “J” Type #8
7 20694.0000 2 Bracket, Divider Mounting
01317.0000 2 Screw, Truss Head #8-32 x .50"
00991.0000 2 Nut, Elastic Lock #8-32
8 25996.0000 1 Bracket, Hopper Filler
01315.0000 4 Screw, Truss Head #8-32 x .38"
01516.0000 4 Washer, Nylon-Retainer #8 x .312" O.D.
7
36777 041604
Page 8
BUNN
10 11 12 13 14 15 16
®
SOLENOID AND COMPONENTS
FPG-2 DBC
1
2
18
21
20
19
22
4
3
17
5
9
6
5
8
7
9
23
P1025
8
36777 041604
Page 9
SOLENOID AND COMPONENTS
ITEM PART NO. QTY. DESCRIPTION
1 20611.0000 1 Gasket, Motor/Hopper
2 23976.0000 1 Ring, Retaining
01370.0000 3 Screw, Pan Head #8-32 x .75"
00970.0000 3 Nut, Keps #8-32
3 26854.0000 1 Divider, Burr Housing
4 26824.0000 1 Plate, Filler
5 23978.0000 2 Plate, Slide
6 23979.0000 1 Plate, Spacer
7 23983.0000 1 Ring, Mounting
8 27102.0000 1 Setscrew, Cup Point #10-32 x .38"
9 27089.0000 2 Pin, Dowel
10 05939.0000 2 Solenoid & Bracket Assembly
01311.0000 8 Screw, Truss Head #8-32 x .25"
11 23923.0000 2 Washer .063" Thick
12 27087.0000 2 Spring
13 23922.0000 2 Washer .035" Thick
14 27086.0000 2 Plunger, Solenoid
15 02858.0000 2 Pin, Spring .125" Dia.
16 23919.0000 2 Ring, Snap
17 26033.0001 2 Bearing, Snap-in
18 23975.0000 2 Bracket, Solenoid Mounting
19 21438.0002 2 Washer, Shoulder .203" I.D.
20 23982.0000 1 Plate, Solenoid Mounting
21 27088.0000 2 Washer, Nylon
22 24457.0000 2 Screw, Shoulder #8-32 x .125" Long
23 21484.0000 1 Setscrew, Burr Housing Divider Retaining, Cup Point #8-32 x .38"
9
36777 041604
Page 10
BUNN
®
ELECTRICAL AND OPERATING CONTROLS
FPG-2 DBC
1
2
3
6
7
8
9
4
5
10
P2950
36777 041604
Page 11
ELECTRICAL AND OPERATING CONTROLS
ITEM PART NO. QTY. DESCRIPTION
1 29970.0000 1 Mount
00973.0000 2 Nut, Keps #6-32
2 29972.0000 1 Control Board 120V
00973.0000 2 Nut, Keps #6-32
3 32156.0000 1 Spacer
4 01309.0000 1 Screw, Power Cord Ground, Pan Head W/Terminal Washer #10-32 x .50"
5 20987.0000 1 Circuit Breaker, 3 Amp
6 22126.0000 1 Rectifier, Bridge Sgl Phase
01338.0000 1 Screw, Truss Head #8-32 x .62"
7 25948.0000 1 Relay 120V
02308.0000 2 Screw, Pan Head Serrated #8-32 x .38"
8 36693.0000 1 Bracket, Component Mounting
9 00707.0000 1 Bushing, Strain Relief
10 20630.0001 1 Cord Assy, Power(120V)
11 36708.0000 1 Harness, Wiring
12 35260.0000 1 Cable Mount, Adhesive
Not Illustrated
11
36777 041604
Page 12
BUNN
®
16
13
15
MOTOR, BURR HOUSING AND COMPONENTS
FPG-2 DBC
1
2
OPTIONAL EXTRA FINE
DECHAFFER
10
12
3
4
5
6
7
8
9
11
13
12
14
P1027
36777 041604
Page 13
MOTOR, BURR HOUSING AND COMPONENTS
ITEM PART NO. QTY. DESCRIPTION
1 20576.0000 1 Cover, Motor
20609.0000 2 Screw, Flat Head #8-32 x .50"
2 25909.1000 1 Motor & Housing Assy (Includes Terminals)
25909.1001 1 Motor & Housing Assy (Includes Terminals) (LPGA-2E, 230V)
01326.0000 3 Screw, Truss Head #10-32 x .25"
3 -------------- 1 Burr, Upper (Order item 17)
20669.0000 2 Screw, Binding Head #10-32 x .29"
4 -------------- 1 Burr, Lower (Order item 17)
20669.0000 2 Screw, Binding Head #10-32 x .29"
5 20667.0000 1 Bushing, Spring Retainer
6 20666.0000 1 Spring, Burr Rotor
7 26043.0000 1 Rotor Assy (Includes item 6)
8 20670.0000 1 Disc, Load
9 20673.1000 1 Cap, Burr Housing (Includes item 10)
20672.0000 2 Screw, Fillister Head #10-32 x .62"
10 05880.0002 1 Decal, Grind Indicator
11 20671.1000 1 Screw, Burr Adjusting (Includes item 12)
12 05796.0000 1 Decal, Adjusting Screw
13 20588.0000 2 Spring Plate, Dechaffing
14 20572.0000 2 Support, Dechaffer
02336.0001 2 Screw, Truss Head #4-40 x .31"
15 33223.0000 2 Support, Dechaffer
02336.0003 2 Screw, Truss Head #4-40 x .68"
16 33222.0000 2 Support, Dechaffer
17 05861.1002 - Burr Kit (Includes items 3, 4 and Mounting Screws)
18 20620.0000 1 Burr Adjuster (Not Illustrated)
Optional. Models with
Extra Fine Dechaffer
13
36777 041604
Page 14
NUMERICAL INDEX
PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO. PART NO. PAGE NO.
00707.0000 .......................11
00725.0000 .........................7
00917.0000 ......................5,7
00970.0000 .........................9
00973.0000 .......................11
00991.0000 .........................7
01309.0000 .......................11
01311.0000 ......................5,9
01315.0000 ..................... 5,7
01317.0000 .........................7
01326.0000 .......................13
01338.0000 .......................11
01370.0000 .........................9
01516.0000 .........................7
01516.0001 .........................7
02308.0000 ....................5,11
02328.0000 .........................7
02336.0001 .......................13
02336.0003 .......................13
02858.0000 .........................9
05796.0000 .......................13
05839.0000 .........................5
05861.1002 .......................13
05876.0000 .........................7
05880.0002 .......................13
05939.0000 .........................9
20545.0000 .........................5
20572.0000 .......................13
20576.0000 .......................13
20585.0001 .........................5
20588.0000 .......................13
20591.1003 .........................5
20609.0000 .......................13
20611.0000 .........................9
20617.1014 .........................5
20620.0000 .......................13
20630.0001 .......................11
20666.0000 .......................13
20667.0000 .......................13
20669.0000 .......................13
20670.0000 .......................13
20671.1000 .......................13
20672.0000 .......................13
20673.1000 .......................13
20694.0000 .........................7
20704.0000 .........................5
20751.0001 .........................7
20987.0000 .......................11
21438.0002 .........................9
21484.0000 ........................
22126.0000 .......................11
23919.0000 .........................9
23922.0000 .........................9
23923.0000 .........................9
23975.0000 .........................9
23976.0000 .........................9
23978.0000 .........................9
23979.0000 .........................9
23982.0000 .........................9
23983.0000 .........................9
24457.0000 .........................9
25909.1000 .......................13
25909.1001 .......................13
25948.0000 .......................11
25994.0000 .........................7
25996.0000 .........................7
25997.0000 .........................7
26033.0001 .........................9
26043.0000 .......................13
26824.0000 .........................9
26854.0000 .........................9
26855.1000 .........................7
27076.1000 .........................7
27086.0000 .........................9
27087.0000 .........................9
27088.0000 .........................9
27089.0000 .........................9
27102.0000 .........................9
29970.0000 .......................11
29972.0000 .......................11
29975.0000 .........................5
32156.0000 .......................11
33222.0000 .......................13
33223.0000 .......................13
35260.0000 .......................11
36455.0000 .........................5
36512.0000 .........................5
36693.0000 .......................11
36706.0000 .........................5
36708.0000 .......................11
9
22
36777 041604
Loading...