CONSTRUCTION FEATURES
TECHNICAL FEATURES
• Body, external housing, wash tank, and all chassis
components in brushed stainless steel 304 18/10
• Upper and lower wash and rinse revolving arms constructed
of reinforced fiberglass; easy to remove and clean without
the need for tools
• Integrated AISI 18/10 stainless steel booster with insulated
lining
• Safety micro-switch on the door to interrupt wash pump
action
• Independently-operated heating elements alternating
between booster and wash tank
• Alternating heating elements reducing maximum absorption
thereby reducing energy costs
• Automatic fill and water level regulation of the wash tank
• Wash pump protected with filter plus additional shield for
tank element
• New dFilter system ®
• Door-opening with overall clearance of 13.4” (340 mm)
• Slide out integrated front control panel provides easy access
for service
• Electronic Temperature gauges displaying wash and rinse
temperatures
• Rack capacity: 19.75” x 19.75” (500 mm x 500 mm)
• Complete operating cycle: Two programmable cycles
(1-3 Min)
• Wash tank capacity: 7.25 U.S. gallons (5.50 U.S. Ltl)
• Wash tank element: 2800 watts
• Wash temperature: 150°F (65°C)
• Booster capacity: 2.20 U.S. gallons (8 litres)
• Booster element: 4000 watts
• Booster (water) temperature:
185°F - 194°F (85°C - 90°C)
• Power supply: 208-240/60/1
• Amperage: 22.3 amps
• Maximum power rating: 4550 watts
• Water consumption: 0.79 U.S. gallons per cycle
(3 litres)
• Water consumption per hour: 25.9 U.S. gallons
(98 litres max.)
• Water supply: 1/2“ hot water supply 140°F / 60°C
• Recommended pressure: 25 p.s.i. (dynamic)
(PRV may be required)
• Water inlet connection: 3/4” male hose connector
(hose included)
• Drain connection: 1” ID (25.4mm) max height 36”
(915mm) (hose included)
• Shipping weight: 165 lbs (75 kg)
• Thermostatic control of wash and rinse temperatures ensure
optimum results
• Unit equipped with: automatic drain pump, automatic
peristaltic pumps for both liquid detergent and rinse additive
• Standard equipment includes: One open combination rack
and one peg dish rack 19.75” x 19.75” (500 mm x 500 mm)
FRONT VIEW
22.62"
19.87"
13.40"
SIDE VIEW
23.75"
OPTIONAL ACCESSORIES
• Pressure reducing valve (PRV) kit
• Stainless steel stand (12” high)
• Drain water tempering kit
REAR VIEW
15”
33.50"
Water Inlet
11”
22.62"
Electrical
Drain
2"
9"
11.50"
14"
5659 Royalmount Ave.
Montreal, QC, Canada H4P 2P9
Telephone: 514.737.9701 / Toll Free: 888.275.4538
Fax: 514.342.3854 / Toll Free: 877.453.8832
sales@mvpgroupcorp.com / mvpgroupcorp.com
JET-TECH is a registered trade mark of MVP Group.
Specifications subject to change without notice.
12000 Biscayne Blvd., Suite # 108
Miami, FL, United States 33181
Telephone: 786.600.4687 / Toll Free:
844.218.8477 Fax: 786.661.4100