Lean back and escape into the warmth of your new WaterDance Bath by Jetta
with the condence that you have made the right choice.
WaterDance Baths have unique features that are not found in any
other whirlpool bath. We have mastered the ergonomics of body comfort and
perfect jet placement, giving you luxury at a reasonable price. Our
passive warm air induction systems and totally insulated whirlpools allow us to
provide our exclusive Jetta Stay Hot Guarantee. We guarantee the water
temperature will stay within 2 degrees of its original temperature after 30 minutes
of use. This insulation also means that distractive motor noises and vibrations are
virtually eliminated, allowing you to escape from the world a little bit longer.
In this manual, you will nd the information that you will need to install and
operate your new bath. If you have any additional questions regarding your
tub, feel free to call us at 1-800-288-7771, and we’ll be happy to answer your
questions.
Jetta Bath Systems are available in a wide variety of shapes, sizes, and jet congurations with several premium •
models available and offers the ultimate in hydrotherapy and relaxation. Jetta has mastered the ergonomics
of body comfort and jet placement and includes built in arm, foot and head rests as well as lumbar support for
maximum comfort.
Made with the highest quality materials and manufactures to ANSI and ASME standards, Jetta offers quality •
and luxury at an affordable price. Features such as rebar, extra thick acrylic, low density insulating foam
surrounding each tub and a permanent color throughout the entire bath set Jetta apart. Each bath is
manufactured with a high gloss, high impact non-porous acrylic, which casts permanent color throughout and
is chemical, stain and UV resistant. Due to the high heat retention of this material, the acrylic is warm to the
touch, providing a more comfortable bathing experience and will maintain a beautiful appearance for years.
Unlike most bath tubs, our insulated whirlpool and soaker baths are engineered to stay hot without the use of •
an in-line heater. In fact, we are so condent in our insulation and warm air induction system, we guarantee
that the water will stay within 2 degrees of its original temperature after 30 minutes of use. The insulation
surrounding each tub also protects the plumbing, gives added support and cuts down on noise and vibrations.
The fact that there is no hazardous heating element in contact with the bath water is also an important safety
feature, which will save you on costly wiring, operating costs, and repair bills when the heater inevitably fails.
Jetta baths are tted with full size ow-adjustable rotating and directional jets. Elite and Designer baths have •
rotating back jets that are also adjustable to stationary jets. All body jets and Classic back jets are direction
adjustable at the jet to allow focused water ow. Each full size jet is volume adjustable for a truly customized
hydro-massage.
Our air option can be added to most whirlpool baths to create the ultimate bathing experience for an •
air/whirlpool combination. The air option may also be added to most un-skirted soaker bath to provide
a gentle relaxing massage.
The passive warm air induction system is another unique feature of Jetta baths. This efcient system quietly •
recirculates heated air from the motor back to the bath water through the jets. This very efcient system
combined with the low density polyurethane foam insulation eliminates the need for an in-line heater.
Jetta whirlpools are plumbed with antimicrobial ex pipe. This antimicrobial piping is held in place by our •
insulation, uses drain-back technology and will not hold water. Along with our 100% self draining suction
tting (IAPMO listed), this makes for a cleaner, healthier bath.
Safety is always a consideration. Details like skid resistant bottoms, grab bars and a raised lip to keep •
splash-over in the bath, not on the oor allow the user to relax knowing their tubs are safe.
Jetta baths are extra deep - each tub is at least 20” deep, but can go to 32”, they are available in non-jetted, •
“soaker” models and several styles are also available with integral skirts with access panels.
WaterDance baths are available in standard colors of White, Biscuit, and Bone. A wide variety of Kohler, •
American Standard and other decorator and designer colors are available. Each tub can be trimmed with
matching acrylic or can be upgraded to a Chrome, Polished Brass, Oil Rubbed Bronze or Satin Nickel trim kit.
Jetta baths are U.L. Listed as hydro-massage baths. Jetta baths are commercial quality and designed to reduce •
utility costs, noise complaints and service calls. Each Jetta J-Line and WaterDance Baths by Jetta bath comes
with a 10-year limited factory warranty.
Jetta baths are available with many options available including contoured and jetted neck pillows, Mood or LED •
lights, waste and overow systems, aromatherapy, and 6” acrylic grab bars to customize your Jetta experience.
IMPORTANT: READ AND FOLLOW ALL INSTRUCTIONS PRIOR TO INSTALLATION
AND USE. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Operational:
Do not permit children to use unit unless they are closely supervised at all time. Supervision is also required when 1.
the bath is used by an elderly or handicapped individual.
Use this unit only for its intended use as described in this manual. Only use attachments recommended by the manufacture. 2.
Never drop or insert any object into any opening. Do not operate electrical appliances while in or within 5 feet of the bath. 3.
Do not operate this unit without the guard over the suction tting. Long hair must be kept away from the suction 4.
screen to avoid entrapment. If entrapment occurs, immediately turn unit off.
Never turn on pump before unit is lled with water 2” above jets – this will void the warranty. 5.
Water level should not exceed the lowest edge of the overow or controls. 6.
The water in a whirlpool should never exceed 40°C (104°F). Water temperatures between 38°C (100°F) and 40°C 7.
(104°F) are considered safe for a healthy adult. Prolonged immersions in hot water may produce hyperthermia.
The symptoms of hypothermia include an increase in the internal temperature of the body, dizziness, lethargy,
drowsiness and fainting, which can be fatal. Lower temperatures are recommended for extended use (exceeding
10-15 minutes) for young children.
Since excessive water temperatures have a high potential for causing fetal damage during the early months of 8.
pregnancy, pregnant or possibly pregnant woman should limit water temperature to 38°C (100°F). Consult a
physician before using.
Persons using medication should consult a physician before using a whirlpool since medication may induce drowsi-9.
ness while other medication may affect heart rate, blood pressure and circulation. The use of alcohol, drugs or
medication before or during whirlpool use may lead to unconsciousness with the possibility of drowning.
Persons suffering from obesity or with a medical history if heart disease, low or high blood pressure, circulatory 10.
system problems, or diabetes should consult a physician before using a whirlpool.
Electrical:
This unit must be connected to a supply circuit that is protected by a ground-fault-circuit-interrupter (GFCI). Such 1.
a GFCI should be provided by the installer and should be tested on a routine basis. To test the GFCI, push the
test button. The GFCI should interrupt power. Push the reset button. Power should be restored. If the GFCI fails to
operate in this manner, there is a ground current owing indicating the possibility of an electric shock. Do not use
this unit. Disconnect the unit and have the problem corrected by a qualied service representative before using.
Disconnect power before servicing. 2.
Whirpool pump connections only: 3.
a. A green colored terminal (or wire connector marked “G”, “GR”, “Ground” or “Grounding”) is provided within the
terminal compartment. To reduce the risk of electric shock, connect this terminal or connector to the grounding terminal of your electric service or supply panel with a continuous green insulated copper wire equivalent in size to the
circuit conductors supplying this equipment.
b. A pressure ground connector is provided on the exterior of the terminal box within this unit to permit connection
of a No. 8 AWG (8.4mm²) solid copper bonding conductor between this unit and all other electrical equipment and
exposed metal in the vicinity, as needed to comply with state and local requirements.
For whirlpools and soakers the Mood or LED light option has its own separate power cord and must be plugged in. 4.
Install to permit access for servicing (for built-in and custom units).5.
Installer / Owner bears all responsibility to comply with all state and local codes when installing this product. 6.