Jetson JGBS User Manual

USER MANUAL

MODEL #: JGBS | VERSION #: 1

GRAVITY BALANCE BIKE

1

Model #: JGBS | Version #: 1

Congratulations on your new Jetson Gravity Balance Bike! Please

note, this is not an electric device. Before your rst ride, please
check whether the wheels are damaged, or parts are loose. If there
are any abnormalities, please contact Jetson Customer Support at

1-[phone], or email [e-mail].

This product manual can help you understand, assemble, use, and maintain
your Jetson Gravity Balance Bike. In order to avoid danger caused by colli­sions, falls, and loss of control, please use caution and learn how to ride the
Jetson Gravity Balance Bike safely. Jetson and authorized dealers cannot be
held liable for injury or damage caused from riding the Jetson Gravity Bal­ance Bike. Falling, losing control, and collisions (including failure to obey the
Jetson Gravity Balance Bike manual) may cause injury. In order to minimize
the risk, ensure you read the Jetson Gravity Balance Bike manual carefully.
Users ride at their own risk.

The user is responsible for consequences caused by violating warnings or
improper operations.

If for any reason you want to return this product, please call us at 1-(888)
976-9904 or email us at [e-mail] before returning
it to the store.

WHAT’S IN THE BOX:

• 1 x Gravity Balance Bike

• 2 x Bearing Bushings

• 3 x Headset Caps

• 1 x Pipe Clip

• 1 x Allen Wrench

2

Model #: JGBS | Version #: 1

FOR YOUR SAFETY:

• This product is suitable for children age 2-5, and for use on private
property and closed courses. Always drive defensively, and watch out

for potential obstacles that may catch your wheel or cause you to swerve
suddenly.

• The Jetson Gravity Balance Bike should always be used under super­vision.

• Always check any local laws or regulations which may a󰀨ect where the
Jetson Gravity Balance Bike may be used.

• Ride at your own risk and use common sense. Any rider that is unable to t
comfortably on the vehicle should not attempt to ride it. All decisions on who
is allowed to ride the Jetson Gravity Balance Bike should be made based on
their maturity, skill, and ability to follow the rules.

• The Jetson Gravity Balance Bike is designed for one rider, with a maximum
weight of 65 pounds. Never carry passengers, and do not attach the Jetson
Gravity Balance Bike to other objects.

• This product was manufactured for performance and durability, but is not
impervious to damage. Jumping and aggressive riding should be avoided
under all circumstances. The rider assumes all responsibility and risk associ­ated with high-stress activity.

• Keep your ngers and other body parts away from all other moving compo­nents when operating the Jetson Gravity Balance Bike. Keep your hands on
the handlebars at all times.

• Do not wear headphones or use a cell phone while operating the Jetson
Gravity Balance Bike.

• Do not operate the Jetson Gravity Balance Bike in wet or icy weather, and
never immerse the product in water.

• Avoid excessive speeds when riding downhill, as it increases the risk of
accident and injury. Avoid wet, slick, bumpy, uneven or rough surfaces while
using the Jetson Gravity Balance Bike. Never risk damaging surfaces such

as carpet and ooring by using the product indoors.

• Do not ride at night, or when visibility is limited.

• Always wear proper protective equipment, such as a helmet, elbow pads,
and knee pads. Athletic shoes with rubber soles are best for riding the Jet­son Gravity Balance Bike.

• Never operate the product barefooted or in sandals, and keep shoelaces
tied and out of the wheels.

3

Model #: JGBS | Version #: 1

OVERVIEW:

1) Handlebar

2) Pipe Clip

3) Front Frame

4) Headset Bushing (Headset Cap
with Bearing Bushing)

5) Front Fork

6) Seat

7) Wheel

4

Model #: JGBS | Version #: 1

ASSEMBLY INSTRUCTIONS:

1. Insert a Headset Cap and Bearing Bushing (4)
into the top of the Front Fork (5).

2. Insert the Front Fork (5) through the Front
Frame tube (3) and slide it down against the
Headset Cap and Bearing Bush (4). Place
the remaining Headset Cap and Bearing
Bushing in the top of the Front Fork tube.

3. Put the Pipe Clip (2) in the top of the Front
Fork tube, and insert the Handlebar (1) into
the Pipe Clip. Tighten using the included
Allen Wrench.

5

Model #: JGBS | Version #: 1

To adjust the seat height, you must
change the Connection Plate (as
pictured to the right). To raise the
seat, insert the Connection Plate
with the opening upwards. To lower
the seat, ip the Connection Plate
so the cross bracing faces upwards.

NOTE: Seat and handlebar heights must be adjusted before your rst ride. The
proper riding position is seated comfortably, with legs completely straight and
able to touch the ground with the tips of your toes. Always check the seat and
handlebar heights before riding.

The Jetson Gravity Balance Bike has the ability to raise and lower
the seat, depending upon the height of the child.

PRODUCT REGISTRATION

Please complete and mail this card within 10 days of purchase.

Name: _____________________________________________________________________

Age: _______________________________________________________________________

Address: ___________________________________________________________________

City, State, Zip: _____________________________________________________________

Email: _____________________________________________________________________

Home Phone: __________________ Work Phone: ________________________________

Purchase Date: ___________ Purchased from: _________________________________

Serial Number: _____________________________________________________________

Product: ___________________________________________________________________

Gender: _______________ Occupation: ________________________________________

Is this your rst Jetson product? _____________________________________________

Other similar product owned before: _________________________________________

How did you hear about the Jetson

®

Gravity Balance Bike?

____________________________________________________________________________

____________________________________________________________________________

Complete this form and mail it to:

Attention: Product Registration

Jetson Electric Bikes

1 Rewe Street

Brooklyn, NY 11211

A LEADER

IN ELECTRIC TRANSPORTATION

888-976-9904

[e-mail]

WWW.JETSONBIKE.COM

IF YOU LIKE THIS PRODUCT, PLEASE CHECK OUT THE

OTHER PRODUCTS ON OUR WEBSITE, INCLUDING OUR:

• ELECTRIC BICYCLE

• FOLDING ELECTRIC SCOOTER

• ELECTRIC MOPED

• ELECTRIC SKATEBOARD

...AND MORE!