How it Works
JET OPTOELECTRONICS
Loading...
620053U554
User Manual
30 pgs2.41 Mb0

JET OPTOELECTRONICS 620053U554 User Manual

Family Entertainment
System
Owner’s manual
EN
1
2
FAMILY ENTERTAINMENT SYSTEM
Contents
EN
© 2017 VoxxHirschmann Corporation. All rights reserved. This manual, or any portion thereof, may not be reproduced without the express written permission of VoxxHirschman Corporation. Design and specications subject to change without notice.
3
Welcome
Thank you for purchasing the Family Entertainment System. Before operating the system, read this manual thoroughly and retain it for future reference.
Important Notice
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. The monitors should never be installed where they will be visible, directly or indirectly, by the operator of the motor vehicle. If your vehicle is equipped with a wireless rear seat audio system or any other wireless infrared device, make sure it is powered off when operating the Rear Seat Entertainment System. If both systems are powered on at the same time, the two systems may obstruct each other, possibly creating undesirable audio interference through the wireless headphones
Safety Precaution
For safety reasons, when changing video sources, it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten safety belts to make any adjustments to the system. System adjustments can be accomplished using the remote control unit, while safety belts remain fastened. Enjoy your entertainment system but remember that safety of all passengers remains the number one priority. Direct eye contact from protruding HDMI cables and or USB memory sticks may result in injury during an accident. To prevent eye injury, disconnect all HDMI cables and USB
memory sticks when not in use.
Warnings
• Do not use any harsh solvents or chemicals when cleaning the unit.
• Do not use any abrasive cleaners that may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
• Do not put pressure on the screen.
4
Product Features
EVO 4
• 10.1-inch Color TFT-LCD Panel (1024x600) with 16:9 aspect ratio
• USB 2.0, SD Card, and MHL-compatible HDMI Ports
• 3.5mm Stereo Headphone Output
• Power Buttons on Side of Monitor
• 7 Function Capacitive Touch Buttons
• 11 Function Remote Control
• Infrared Transmitter for IR Wireless Headphones
• Remote Sensor on the Front Panel
• IP remote control capability (using optional mobile app)
• Monitor screen sharing
• Miracast wireless display capability
• Media streaming
EVO 0
• 10.1-inch Color TFT-LCD Panel (1024x600 with 16:9 aspect ratio
• 3.5mm Stereo Headphone Output
• Infrared Transmitter for IR Wireless Headphones
• Remote Sensor on the Front Panel
• 11 Function Remote Control
• Side Mounted Power Button
• 7 Function Capacitive Touch Buttons
• IP remote control capability (using optional mobile app)
• Monitor screen sharing
Caution
Be sure to run the vehicle engine while using the system. Using this system without running the engine can result in battery drain. To avoid the risk of battery drain, please remember to turn off the system when the vehicle is not in use. Do not touch the inner pins of the jacks on the front panel. Electrostatic discharge may cause permanent damage to the system.
Accessories
Wireless Headphones
Each monitor includes a built-in dual channel infrared transmitter for use with wireless headphones. The wireless headphones must be used within a direct line of sight from the screen. Infrared transmission, like visible light, travels only in a straight line.
How to Use the Wireless Headphones
When wearing the headphones, make sure to observe the “Left” and “Right” labels. The headphones must be oriented correctly in order to receive the audio signal. Press the power button located on the right side headphone. To switch between channel “A” (Driver’s side) and channel “B” (Passenger side), slide the selector switch located on the right side. Volume can be adjusted by rotating the wheel on the outside of the channel select button. The headphones are designed to automatically turn off after approximately 3 minutes of no activity to help prevent battery drain. If the headphones are not going to be used for an extended amount of time it is recommended to remove the batteries to prevent damage of the headphones due to battery corrosion.
EN
Wired Headphones
The System will allow you to use your personal headphones to listen to audio content. There are 3.5mm stereo headphone output jacks located on the front panel of each
monitor which can be used with most standard stereo headphones.
5
Control Description of the Front Panel - EVO 4
6
2
7
3
4
5
1. 10.1-inch TFT LCD Panel.
2. Headphone Output Jack. Connect wired headphones using a 3.5 mm stereo connector
3. USB Port. You can play music, images, and videos stored on most USB devices.
4. MHL-Compatible HDMI Port. Connect an external audio/video source using a MHL or HDMI connector.
5. Capacitive Touch Buttons. Directional arrows, Enter, Return, and Home functions can be accessed via these touch buttons on the front panel.
6. Power Button. This button will turn the monitor on and off.
7. SD Card Slot Insert full size SD Card into the slot located on the left side of the monitor when opened to view content.
6
1
Control Description of the Front Panel - EVO 0
EN
4
2
3
1. 10.1-inch TFT LCD Panel.
2. Headphone Output Jack. Connect wired headphones using a 3.5 mm stereo connector
3. Capacitive Touch Buttons. Directional arrows, Enter, Return, and Home functions can be accessed via these touch buttons on the front panel.
4. Power Button. This button will turn the monitor on and off.
1
7
Remote Control Operation
Installing or Replacing the Battery
1. On the rear of the remote control, use a coin to turn the battery cover slightly counterclockwise and remove the battery cover.
2. Install one “CR2032” battery as shown. Make sure that proper polarity (+ or -) is observed. The Positive (+) side of the battery should be facing upwards.
3. Place the cover back and turn it clockwise until it locks into place.
The remote control is only designed to operate this device. It is not a universal remote control and will not operate any other device.
Warning/Caution on using batteries
• Always ensure that the battery is inserted with the positive and negative terminals in the correct direction as shown in the battery compartment.
• If the remote control fails to function, replace the battery before seeking repairs at the dealer.
• Keep batteries out of the reach of children. Should the battery be swallowed, immediately consult a doctor. When disposing of used batteries, please comply with governmental regulations or environmental public institution rules that apply in your country/area.
• Remove the battery if the remote control is not used for a month or longer to avoid corrosion and damage to the remote control.
8
Remote Control Operation (continued)
1
2 3
4
EN
5
6
7
8
9
10 11
1. POWER Press this button to turn the monitor on and off.
2. A Press this button to operate monitor A.
3. B Press this button to operate monitor B.
4. UP Press this button to navigate up when displaying a menu or le list.
5. LEFT Press this button to navigate left when displaying a menu or le list.
6. DOWN Press this button to navigate down when displaying a menu or
le list.
7. RIGHT Press this button to navigate right when displaying a menu or
le list.
8. SELECT Press this button to make a selection or begin playback of the media.
9. HOME Press this button to return to the home screen.
10. BACK Press this button to go back to the previous screen.
11. CONTEXT MENU Press the button to go to the open the context menu options (when available).
9
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use