Jet City Amplification Custom 22 Owner's Manual
JJEETT CCIITTYY AAMMPPLLIIFFIICCAATTIIOONN
CCuussttoomm 2222
OOWWNNEER
R
’
’
SS MMAANNUUAALL
2
DANGER: RISK OF ELECTRIC SHOCK,
DO NOT OPEN
ATTENTION: RISQUE DE CHOC
ELECTRIQUE!
NE PAS OUVIRIR!
ACHTUNG: STROMSHLAG GEFÄHRDUNG,
NICHT AUFMACHEN!
CAUTION: To reduce the risk of electric shock, do not
remove cover or open rear panel. No user serviceable parts
inside: refer handling to qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not
expose this amplifier to rain or moisture.
Before using your amp.
Before operating the Custom 22 please make sure of the following:
First, connect the amp head to a speaker cabinet or other
suitable load. Never run the amp without a load connected
to the output.
Connect the power cable into the back panel and then to a
power outlet.
With the amp in the standby position, switch the power to
ON and wait about 30 seconds for the tubes to warm up.
Change the standby switch to ON.
You’re ready to go.
WARNING: If a speaker or suitable “dummy load” is not connected to
the speaker output, output transformer failure is very possible.
3
Important Safety Message.
1. Read and keep these instructions.
2. Heed all warnings and follow all instructions.
3. Do not operate near water.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions
6. Do not install near heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
7. Protect the power cable from being walked on or pinched
at the plugs, convenience receptacles, and the point where
they exit the unit.
8. Do not defeat the safety purposes of the polarized or
grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The third prong is
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of
the outdated/obsolete outlet.
9. Unplug the amplifier during lighting storms or when unused
for long periods of time.
10. Refer all servicing to qualified service personnel. Servicing is
required when the amp has been damaged in any way, such
as power cable or plug damage, liquid has been spilled or
objects have fallen inside, the amp has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
4
Thank you.
We truly appreciate and value your support through your
purchase. If you have any questions or concerns about your
new amp, feel free to email to doug@jetcityamplification.com
This Custom 22 was designed in USA, and meticulously assembled
to assure that it meets the highest quality standards and value.
Our ‘Custom Shop’ is a virtual concept, with the base model
assembled in our usual way, and custom variations of the amp
completed in a variety of secondary locations. This means it is
possible some of the features and components may be different
from other Custom 22 amps. Therefor this manual will just cover
the base features.
Thank you for purchasing a JET CITY AMPLIFICATION product, we
hope you love it.
Douglas White
Founder.
Loading...