Stand for JWSS-22B Scroll Saw
Assembly Instructions and Parts Breakdown
Shipping contents
Refer to Figures 1 and 2, and exploded view on
reverse side.
2 Long top braces – (#3)
2 Short top braces – (#4)
2 Short bottom braces – (#7)
2 Long bottom braces – (#8)
4 Legs – (#5)
4 Leg extensions – (#10)
1 Hardware kit, contains:
4 Hex cap screws 5/16x1 – (HP1)
24 Carriage bolts 5/16x1/2 – (HP2)
32 Flat washers 5/16 – (HP3)
28 Hex nuts 5/16 – (HP4)
Tools required for assembly
5. Some scrollers prefer to tilt the saw toward them
for convenience. If this is desired, adjust only
the two front leg extensions.
6. Mount scroll saw to stand, according to
instruct io n s i n t he scro ll sa w m an ual.
14mm open-end wrench
12mm wrench
Assembling stand
1. Assemble stand pieces, referring to Figure 10.
Only hand-tighten all fasteners at this time.
2. The leg extensions (#10, Figure 1) can be
adjusted for height.
3. If stand will not be bolted to the floor, install the
leveling feet that were included w ith the scroll
saw, onto the bottoms of the stand leg
extensions.
4. Position stand upright on level floor. Push down
on stand assembly to settle it on floor, then fully
tighten all fasteners with 12mm wrench.
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-727200S
Ph.: 800-274-6848 Edition 1 05/2016
www.jettools.com Copyright © 2016 JET
Figure 1: stand assembly
Figure 2: hardware kit JWSS22B-SHK
Specifications
Stock number ............................................................................................................................................. 727200S
Stand footprint (LxW) .................................................................................................. 28 x 25-1/2 in. (711 x 648 mm)
Net weight ........................................................................................................................................ 21. 5 lbs (9.8 kg)
Shipping weight ................................................................................................................................. 2 3 lbs (10.4 kg)
Specifications were current at time of publication, but because of our policy of continuous improvement, JET reserves
the right to change specifications at any time and without prior notice, without incurring obligations.
Replacement Parts
To order parts or reach our ser vice department, call 1-80 0-274-6848 Mo nday through Frida y, 8:00 a.m. to 5:00
p.m. CST. Having the Model Number and Serial Number of your product available when you call will allow us to
serve you quickly and accurately. Non-proprietary parts, such as fasteners, are usually available at local
hardware stores or may be ordered from JET.
Index No P art No Description Size Qty
.................. 727200S .................... Stand for Scroll Saw (#1 thru 10)............................. ........................................
1 ................ TS-0051051 .............. Hex Cap Screw ........................................................ 5/16"-18 x 1" ................. 4
2 ................ TS-0680031 .............. Flat Washer ............................................................. 5/16" ............................ 32
3 ................ JWSS22B-103........... Top Short Brace....................................................... ...................................... 2
4 ................ JWSS22B-104........... Top Long Brace ....................................................... ...................................... 2
5 ................ JWSS22B-105........... Leg ........................................................................... ...................................... 4
6 ................ TS-0570021 .............. Hex Nut .................................................................... 5/16"-18 ...................... 28
7 ................ JWSS22B-107........... Bottom Short Brace ................................................. ...................................... 2
8 ................ JWSS22B-108........... Bottom Long Brace .................................................. ...................................... 2
9 ................ JWSS22B-109........... Round Hd. Carriage Bolt, b.oxide ............................ 5/16"-18 x 1/2” ............ 24
10 .............. JWSS22B-110........... Leg Extension .......................................................... ...................................... 4
11 .............. JWSS22B-111........... Rubber washer (included with saw hardware) ......... ...................................... 4
.................. JWSS22B-SHK ......... Stand Hardware Kit (#1,2,6,9) ................................. ........................................
2
Loading...