Jenn-Air W10300219A User Manual

INSTALLATION INSTRUCTIONS

DRAWER DISHWASHER

INSTRUCCIONES DE INSTALACIÓN

DE LA LAVAVAJILLAS DE CAJÓN

INSTRUCTIONS D’INSTALLATION

LAVE-VAISSELLE À TIROIR(S)

Table of Contents/Índice/Table des matières..................................................................2

IMPORTANT:

Save for local electrical inspector's use.

Installer: Leave installation instructions with the homeowner. Homeowner: Keep installation instructions for future reference.

IMPORTANTE:

Guarde para tenerlas a disposición del inspector de electricidad local.

Instalador: Deje las instrucciones de instalación con el propietario. Propietario: Conserve las instrucciones de instalación para referencia futura.

IMPORTANT :

Conserver pour consultation par l'inspecteur local des installations électriques.

Installateur : Remettre les instructions d'installation au propriétaire. Propriétaire : Conserver les instructions d'installation pour référence ultérieure.

W10300219A

TABLE OF CONTENTS

DISHWASHER SAFETY.............................................................................3

INSTALLATION REQUIREMENTS ...........................................................4

Tools and Parts.......................................................................................4

Location Requirements...........................................................................4

Water Supply Requirements...................................................................5

Electrical Requirements..........................................................................6

Drain Requirements ................................................................................6

INSTALLATION INSTRUCTIONS .............................................................7

Unpack Dish Drawer...............................................................................7

Prepare Cabinet Opening .......................................................................7

Prepare Dishwasher................................................................................8

Route Electrical Wiring............................................................................9

ÍNDICE

SEGURIDAD DE LA LAVAVAJILLAS .....................................................19

REQUISITOS DE INSTALACIÓN ............................................................20

Piezas y herramientas...........................................................................20

Requisitos de ubicación .......................................................................20

Requisitos del suministro de agua .......................................................21

Requisitos eléctricos.............................................................................22

Requisitos de desagüe .........................................................................22

INSTRUCCIONES DE INSTALACIÓN ....................................................23

Desempaque el cajón para platos........................................................23

Prepare la abertura en el armario .........................................................23

Prepare la lavavajillas............................................................................24

Dirija el cableado eléctrico....................................................................25

Route Water Supply Line and Drain Hose ...........................................10

Connect Water Supply Line and Drain Hoses .....................................11

Make Electrical Connection..................................................................12

Install Trim Pieces and Level Dishwasher............................................13

Secure Dishwasher...............................................................................15

Complete Installation............................................................................15

CUSTOM PANEL INSTALLATION INSTRUCTIONS ............................17

Custom Drawer Panel...........................................................................17

Preparing Custom Panel ......................................................................17

Install Panel Fasteners..........................................................................17

Mount the Custom Panel......................................................................18

Cómo dirigir la línea de suministro de agua y

la manguera de desagüe......................................................................26

Conecte la línea de suministro de agua y

las mangueras de desagüe ..................................................................27

Conexión del suministro eléctrico ........................................................28

Instale las piezas de adorno y nivele la lavavajillas..............................30

Asegure la lavavajillas...........................................................................31

Complete la instalación ........................................................................32

INSTRUCCIONES DE INSTALACIÓN DEL PANEL A LA MEDIDA.....33

Panel del cajon a la medida .................................................................33

Preparación del panel a la medida.......................................................33

Cómo instalar los sujetadores del panel..............................................33

Cómo montar el panel a la medida ......................................................34

TABLE DES MATIÈRES

SÉCURITÉ DU LAVE-VAISSELLE..........................................................35

EXIGENCES D’INSTALLATION..............................................................36

Outillage et composants.......................................................................36

Exigences d’emplacement ...................................................................36

Spécifications de l’alimentation en eau................................................37

Spécifications électriques.....................................................................38

Évacuation de l’eau de lavage—Critères à respecter..........................38

INSTRUCTIONS D'INSTALLATION .......................................................39

Déballage du lave-vaisselle ..................................................................39

Préparation de l'espace d'installation entre les placards ....................39

Préparation du lave-vaisselle................................................................40

Acheminement du câblage électrique..................................................41

Acheminement du conduit d'alimentation

en eau et du tuyau de vidange.............................................................42

Raccordement du conduit d'alimentation

en eau et des tuyaux de vidange .........................................................43

Raccordement du circuit électrique .....................................................44

Installation des pièces de garniture; établissement

de l’aplomb du lave-vaisselle ...............................................................45

Fixation des tiroirs à vaisselle...............................................................47

Achever l’installation.............................................................................48

INSTRUCTIONS D’INSTALLATION DU PANNEAU DÉCORATIF .......49

Panneaux décoratifs des tiroirs personnalisés ....................................49

Préparation du panneau personnalisé .................................................49

Installation des dispositifs de fixation du panneau..............................49

Montage du panneau décoratif............................................................50

DISHWASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

follow instructions.

can be killed or seriously injured if you don't

You instructions.

■ Read all instructions before using the dishwasher.

■ Use the dishwasher only for its intended function.

■ Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

■ When loading items to be washed:

1) Locate sharp items so that they are not likely to damage the door seal; and

2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.

■ Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

■ Do not touch the heating element during or immediately

after use.

■ Do not operate the dishwasher unless all enclosure panels

are properly in place.

SAVE THESE INSTRUCTIONS

Do not open dishwasher drawer until inside cabinet opening. Doing so can result in death or serious injury.

■ Do not tamper with controls.

■ Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

■ To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

■ Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the dishwasher turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

■ Remove the door or lid to the washing compartment

when removing an old dishwasher from service or discarding it.

WARNING

Tip Over Hazard

You nee d to:

■ Slowly open dishwasher drawer while someone grasps the

rear of the dishwasher. Remove shipping materials. Close dishwasher drawer. Latch the dishwasher drawer shut.

■ Observe all governing codes and ordinances.

■ Install this dishwasher as specified in these instructions.

■ Have everything you need to properly install dishwasher.

■ Contact a qualified installer to ensure that dishwasher is

installed to meet all electrical and plumbing national and local codes and ordinances.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

■ Pliers

■ Phillips screwdriver

■ Flat-blade screwdriver

■ ³⁄₁₆" and ¼" nut drivers or

hex sockets

■ Measuring tape or ruler

■ 1½" hole saw bit

Parts Needed

■ 10" adjustable wrench

■ Utility knife

■ Level

■ Cordless drill

■ ¹⁄₈" drill bit

■ Security T-20 TORX

®†

driver (if installing custom front panel)

Parts Supplied

Check that all parts are included.

A. 72" (182.9 cm) flexible water

supply line B. Zip tie C. Appropriate sized UL-listed wire

connectors (2)

†®TORX is a registered trademark of Acument Intellectual Properties, LLC

D. Handle (if installing custom

front panel)

E. Custom panel (if installing

custom front panel)

³⁄₄

" UL-listed strain relief

B. 1.25" hose clamp C. Mounting bracket screws (8) D. Unit mounting screws (4)

E. Drain hose connector

F. Mounting brackets (4) G. Drain connector spring

clamps (2)

H. Trim strips (2)

I. Toe kick brackets (2)

J. Toe kick bracket screws (2)

K. Toe kick trim

L. Panel fasteners (on some

models) (2)

M. TORX

N. Drain hose

®†

screws (on some

models) (10)

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Failure to meet codes and ordinances could lead to fire or electrical shock.

Proper installation is your responsibility.

■ Contact a qualified installer to ensure that the dishwasher is

installed to meet all electrical and plumbing national and local codes and ordinances.

■ Install the dishwasher as specified in these instructions.

■ Have everything you need to properly install dishwasher.

■ Avoid damage from freezing to dishwasher and water lines

leading to dishwasher. Damage from freezing is not covered by the warranty.

■ This dishwasher is manufactured for indoor use only.

■ Install and level dishwasher on a floor that will hold the weight,

and in an area suitable for its size and use.

Product Dimensions

Preferred Utililty Area

(61 cm)

¹⁄₄"

(48.9 cm)

24"

23³⁄₈"

(59.5 cm)

¹⁄₂"

(3.75 cm)

33³⁄₄"

(85.7 cm)

¹⁄₂"

(1.3 cm)

25"

(63.5 cm)

(20.3 cm)

A. Left-hand or right-hand drain and water connection route B. Left-hand or right-hand electric connection route

NOTES:

■ All holes should be drilled at 1½" (3.8 cm) diameter.

■ If the cabinet is wood, sand the hole until smooth. If the

cabinet is metal, cover the hole with a grommet (Part Number

302797) (provided with power supply cord kit [Part Number 4317824] only).

■ For power supply cord connection, a mating, grounded

3 prong outlet is required in a cabinet next to the dishwasher opening.

Installation Clearances

Cutout Dimensions

24"

(61 cm)

24"

(61 cm)

33³⁄₄"

(85.7 cm)

Water Supply Requirements

■ A hot water line with 20-120 psi (138-862 kPa) water pressure.

■ 120°F (49°C) water temperature at dishwasher.

■ Flexible stainless steel braided fill line (½" minimum plastic

tubing is not recommended).

Electrical Requirements

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

GROUNDING INSTRUCTIONS

■

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The dishwasher is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the dishwasher is properly grounded. Do not modify the plug provided with the dishwasher; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

■

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal, permanent wiring system, or an equipmentgrounding conductor must be run with the circuit conductors and connected to the equipmentgrounding terminal or lead on the dishwasher.

SAVE THESE INSTRUCTIONS

Direct Wire Connection

■ Use flexible, armored or nonmetalic sheathed, copper wire

with grounding wire that meets the wiring requirements for your home and local codes and ordinances.

■ Use strain relief method provided with house wiring junction

box or install a UL-listed/CSA-approved clamp connector to the house wiring junction box. If using conduit, use a UL-listed/CSA-approved conduit connector.

Power Supply Cord Connection

Use Power Supply Cord Kit (Part Number 4317824) marked for use with dishwashers. Kit contents include:

■ Voltex, Inc., UL-listed 16-gauge 3-wire power supply cord with

3 prong grounding plug

■ Neer C-500 ⁷⁄₈" strain relief

■ 3 wire connectors

■ Grommet (Part Number 302797)

Follow the kit instructions for installing the power supply cord. NOTE: Power supply cord must plug into a mating, grounded

3 prong, outlet, located in the cabinet next to the dishwasher opening. Outlet must meet all local codes and ordinances.

IMPORTANT: If you plan to install a garbage disposal, an additional separate 120-volt, 60 Hz, AC-only, 15- or 20-amp fused electrical supply is required.

Drain Requirements

■ Use the new drain hose supplied with your dishwasher. If this

is not long enough, use a new drain hose with maximum length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test standards, is resistant to heat and detergent, and fits the 1" (2.5 cm) drain connector of the dishwasher.

■ Connect drain hose to waste tee or disposer inlet above drain

trap in house plumbing and 20" (50.8 cm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter, or be connected to an air gap.

■ Use a drain air gap if the drain hose is connected to house

plumbing lower than 20" (50.8 cm) above the subfloor or floor.

Drain Air Gap

■ Use ½" (1.3 cm) minimum I.D. drain line fittings.

It is the customer’s responsibility to:

■ Contact a qualified electrician.

■ Ensure that the electrical installation is adequate and in

conformance with all national and local codes and ordinances.

Requirements:

■ 120-volt, 60 Hz, AC-only, 15- or 20-amp fused electrical

supply

■ Copper wire only, 2 wire with ground

Recommended:

■ Time-delay fuse or circuit breaker

■ Separate circuit

INSTALLATION INSTRUCTIONS

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Turn off water supply.

Unpack Dish Drawer

2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses

and electrical wiring as shown. Holes should be placed ½" (1.3 cm) from back wall.

¹⁄₂"

(1.3 cm)

25"

(63.5 cm)

(20.3 cm)

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Read valuable information on exterior of shipping box before

opening.

2. Remove shipping materials, tape and film from the

dishwasher. Remove parts package from inside the dishwasher.

Prepare Cabinet Opening

1. To ensure minimum clearance dimensions exist:

■ Measure the distance from the cabinet countertop to the

floor and ensure 33³⁄₄" (85.7 cm) minimum height.

■ Measure the distance from the front of the cabinet to the

back wall and ensure 24" (61 cm) minimum depth.

■ Measure the distance from the left-hand side to the right-

hand side of opening and ensure 23½" (59.7 cm) minimum width.

A. Choose left-hand or right-hand drain and water hose route. B. Choose left-hand or right-hand electric wire route.

Wood cabinet: Sand the hole until smooth. Metal cabinet: Cover hole with grommet (Part Number 302797

provided).

3. Install mounting brackets 17" (43.2 cm) from floor using

screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet.

17"

(43.2 cm)

4. Decide which dishwasher-to-counter attachment method will

be used.

Option 1: Solid surface countertop installation

■ Install second set of mounting brackets 33½" (85 cm) from

floor. If needed, drill ¹⁄₈" pilot holes in cabinet.

Prepare Dishwasher

WARNING

33¹⁄₂"

(85 cm)

Option 2: Wood countertop installation

■ Prepare dishwasher by folding over tabs located on the

top front as shown.

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet opening.

Doing so can result in death or serious injury.

WARNING

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

1. Measure cabinet opening height from floor to bottom of

countertop.

2. Using two or more people, place corner packaging on the

floor and place dishwasher on its back.

3. Adjust leveling legs based on the cabinet opening

measurement and the chart below.

H : X H : X 33

⁷⁄₈

" (86 cm) : 0" 34

34" (86.3 cm) :

¹⁄₈

" (86.7 cm) :¼" (0.6 cm) 34

34 34

¹⁄₄

" (87 cm) :

³⁄₈

" (87.3 cm) :½" (1.3 cm) 35" (88.9 cm) :1

¹⁄₈

" (0.3 cm) 34

³⁄₈

" (1 cm) 34

¹⁄₂

" (87.6 cm) :

⁵⁄₈

" (87.9 cm) :

³⁄₄

" (88.3 cm) :

⁷⁄₈

" (88.6 cm) :1" (2.5 cm)

4. Place dishwasher in upright position.

⁵⁄₈

" (1.6 cm)

³⁄₄

" (1.9 cm)

⁷⁄₈

" (2.2 cm)

¹⁄₈

" (2.9 cm)

Option 1: Right-hand side utility route

Route wire through 1½" (3.81 cm) hole located

8" (20.32 cm) above the floor.

After routing the electrical wire through the right-hand hole, attach the wire to back left-hand side of cabinet wall 8" (20.32 cm) above the floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening.

Route Electrical Wiring

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Follow all national and local codes and ordinances for completing electrical supply to cabinet.

Option 2: Left-hand side utility route

Route wire through 1½" (3.81 cm) hole located 8"

(20.32 cm) above the floor.

After routing the electrical wire through the left-hand hole, continue routing the wire along the left-hand side of cabinet to the front of the opening.

Route Water Supply Line and Drain Hose

1. Connect water supply line to water valve on dishwasher.

2. Slide clamp onto drain hose, and then push hose into “Y”

connector until fully seated. Several clicks will be heard.

Option 1: Right-hand side utility access

■ For right-hand routing, place the water supply line in the

clips.

3. Slide clamp into position over the “Y” connector.

■ Route drain hose on clips on bottom/back of unit.

Option 2: Left-hand side utility access

■ For left-hand routing, place hose in clip on bottom right-

hand side of the dishwasher.

■ Route water supply line and drain hoses into the cabinet.

2. Slide clamps onto drain hoses (Figure A). Do not cut drain

hoses.

3. Push hose into drain connector until fully seated (Figure B).

Several “clicks” will be heard.

4. Slide clamp into position (figures C and D).

■ Slide dishwasher partway into the cabinet opening. Allow

for access to the electrical terminal box.

5. Connect the drain hose using one of the following options:

Option 1: Waste disposer no drain air gap

Connect Water Supply Line and

Drain Hoses

1. Connect water supply line to the water valve under the sink.

A. Hot water supply

A. For new construction, remove disposer plug. B. Connect drain connector to waste disposer.

C. Tighten clamp.

Option 2: No waste disposer and drain air gap

A. Drain air gap B. Drain hose connector C. Waste

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Option 3: Waste disposer and drain air gap

A. Drain air gap B. Drain hose connector C. Waste

Option 4: No waste disposer, no drain air gap

1. Remove screw securing the electrical box cover. Remove

cover.

2. Route electrical wires through strain relief and secure to

electrical plate.

A. Drain hose connector B. Waste

NOTE: Attach the drain hose connector to the water waste line using the supplied hose clamp.

6. Turn on water and check for leaks.

3. Tighten the conduit connector and strain relief screws.

WARNING

Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in

terminal box. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

4. Connect wires as follows using twist-on connectors sized to

connect direct wire to 16 gauge dishwasher wire.

Power supply wire: Terminal box wire:

white white

black black

ground wire ground connector

6. Reinstall electric box cover with all wires contained inside the

terminal box.

Install Trim Pieces and Level Dishwasher

1. Open bottom drawer.

2. Push in clips and slide rails back 5" (12.7 cm).

5. Attach ground wire to the green ground screw.

A. Attach ground wire to green screw. B. Attach white and black wires.

3. Lift drawer off slide rails. Place drawer off to the left on

covering. Slide rails into dishwasher.

4. Slide the dishwasher into position in the cabinet opening.

Check to ensure that the drain hose and electrical wiring are not kinked.

5. Check left to right level by placing the level on the top of the

drawer. Check front to back level by placing level on the slide rails.

6. Adjust legs with a ³⁄₁₆" socket wrench to level the dishwasher.

8. Attach the toe kick bracket to the frame.

9. Place the trim strip into the toe kick bracket.

A. Adjust legs.

7. Rest the trim strip on the floor and mark the trim at the top of

the frame flange height. Pick the closest groove to the mark. If the mark is between 2 grooves, choose the groove that makes the trim strip shorter. On a covered surface, cut the trim strip at the selected groove.

10. Attach the toe kick bracket on the opposite side.

11. Place the flexible side trim strips on both sides as shown.

Option 1: Solid surface countertop

Attach dishwasher to the side cabinet mounting brackets (installed earlier).

A. Attach dishwasher to side cabinet mounting brackets.

Secure Dishwasher

1. Remove top drawer (same procedure as followed to remove

bottom drawer) and set drawer on bottom drawer separated with corner packaging.

2. Attach dishwasher to the lower cabinet mounting bracket

(installed earlier).

Option 2: Wood countertop

Attach the dishwasher to the countertop using the folded over mounting tabs located on the top of the dishwasher.

A. Attach dishwasher to countertop using folded over mounting tabs.

Complete Installation

1. Pull top drawer slide rails out and set top drawer on slide rails.

A. Attach dishwasher to lower cabinet mounting bracket.

3. Attach dishwasher to upper cabinet mounting brackets.

2. Pull slide rails forward until they snap into position.

OFF

3. Push top drawer in and repeat above steps for bottom drawer.

4. In the cabinet under the sink, coil excess drain hose and wrap

with a zip tie.

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

5. Plug in dishwasher or reconnect the power.

6. Select the Rinse Only cycle and press START/RESUME. Allow

the dishwasher to fill, rinse and drain. Check for leaks. If leaks are found, secure the connection and repeat this step.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the User Instructions or contact the dealer from whom you purchased your dishwasher.

CUSTOM PANEL INSTALLATION INSTRUCTIONS

Custom Drawer Panel

If you plan to install a custom wood panel, you will need to create the panel yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■ The thickness of the custom panel must be ¹⁄₂" (13 cm) to ³⁄₄"

(1.9 cm).

■ Do not exceed the height dimension for the custom panel. A

panel that exceeds the height dimension may damage the drawer dishwasher, cabinets or countertop.

■ The width of the custom panel may vary according to the

width of the cabinet opening.

2. Using a pencil, mark the centerpoints for the 2 panel fastener

pilot holes and 6 pilot holes needed for the panel.

2¹⁄₂"

(6.3 cm)

11¹⁄₄"

(28.5 cm)

8¹⁄₈"

(20.7 cm)

(28.5 cm)

8¹⁄₈"

(20.7 cm)

11¹⁄₄"

1¹⁄₂"

(3.8 cm)

(20.2 cm)

14¹⁄₈"

(36.6 cm)

Custom Panel Dimensions

Upper Drawer Panel

³⁄₄"

(1.9 cm)

Lower Drawer Panel

³⁄₄"

(1.9 cm)

23⁷⁄₁₆"

(59.5 cm)

23⁷⁄₁₆"

(59.5 cm)

16¹⁄₄"

(41.3 cm)

12³⁄₄"

(32.4 cm)

A. Center line B. Panel fastener pilot holes (2) C. Pilot holes (6)

3. Mark the centerpoints for the 2 panel fastener pilot holes and

4 pilot holes need for the lower panel.

2¹⁄₂"

(6.3 cm)

11¹⁄₄"

(28.5 cm)

(20.7 cm)

8¹⁄₈"

(20.7 cm)

11¹⁄₄"

(28.5 cm)

1¹⁄₂"

(3.8 cm)

(26.7 cm)

10¹⁄₂"

A. Center line B. Panel fastener pilot holes (2) C. Pilot holes (4)

4. Using a ¹⁄₈" drill, drill each hole ³⁄₈" (1 cm) deep.

³⁄₈" (1 cm)

Hardware Installation

Center the hardware (left to right) onto the custom panel. When installing the hardware, be sure that the mounting screws are flush with the back of the custom panel.

Preparing Custom Panel

1. Lay the custom panel face down on a clean, soft work

surface.

IMPORTANT: To avoid drilling through to the front of the custom panel, do not drill deeper than ³⁄₈" (1 cm).

Install Panel Fasteners

1. Remove the 2 panel fasteners from the face of the inner door

of the drawer.

2. Screw the 2 panel fasteners into the panel fastener pilot holes

of the custom panel.

+ 39 hidden pages