MICROWAVE OVEN BUILT-IN TRIM KIT
INSTALLATION INSTRUCTIONS
Built-In Trim Kit Models UCTK27, UCTK30
UL listed for use over built-in electric ovens:
27 (68.6 cm): MEW5527, MEW6527
30 (76.2 cm): MEW5530, MEW6530, AEW3530, AEW4530, JJW8130DD, JJW8330DD, JJW9130DD, JJW9330DD
Table of Contents
MICROWAVE OVEN SAFETY ..................................................1
INSTALLATION INSTRUCTIONS.............................................1
Tools and Parts ...................................................................... 1
Location Requirements..........................................................2
Trim Kit Frame .......................................................................2
Minimum Cutout Dimensions................................................. 2
MICROWAVE OVEN SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
Electrical Requirements ..........................................................2
Microwave Oven Preparation .................................................3
Bottom Duct Assembly...........................................................3
Microwave Oven Installation...................................................4
Install Top and Bottom Brackets ............................................4
Install Trim Kit Frame ..............................................................4
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
INSTALLATION INSTRUCTIONS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
■ Measuring tape
■ Pencil
■ Phillips screwdriver
■ Drill
■ 7/64" drill bit
■ Ta pe
Parts Supplied
Duct base Bottom duct Rear duct bracket
Aluminum tape Rear duct Upper duct
2
1
Templates 1 and 2 Top bracket Bottom bracket
follow
W10308504A
Trim kit frame
13/16" screws 9/16" screws 1/2" screws
(2) (16) (4 - painted)
Location Requirements
The microwave oven may be installed over a built-in oven. If
installing over a built-in oven, make sure there is a minimum of 3"
(7.6 cm) between the top of the oven cutout and the microwave
oven cutout floor.
The microwave oven may also be installed in a cabinet by itself
(without a built-in oven below). For best usability, we recommend a
minimum distance of 36" (91.4 cm) from the floor to the cutout floor.
Make sure the surrounding cabinetry has clearance to open and
close freely. Allow a clearance of at least 1" (2.5 cm) below the
cutout floor (3" [7.6 cm] for installation above a built-in oven), and
a clearance of at least 2" (5.1 cm) above the cutout opening.
NOTES:
■ Height, width and depth measurements have ±1/16" (2 mm)
tolerance.
■ 3" (7.6 cm) minimum dimension is from lower oven cutout
ceiling to microwave oven cutout floor.
■ Trim kit frame extends 11/16" (1.8 cm) below, and 1⁹⁄₁₆"
(4.0 cm) above the cutout opening.
Electrical Requirements
WARNING
2"
(5.1 cm)
B
1"
(2.5 cm)
D
E
A. Upper cabinet
B. Microwave oven cutout
C. Lower oven cutout
Trim Kit Frame Dimensions
19¹⁄₈"
(48.6 cm)
*27" (68.6 cm) trim kit
**30" (76.2 cm) trim kit
Minimum Cutout Dimensions
23³⁄₄"
(60.3 cm)
16⁷⁄₈"
(42.9 cm)
3"
(7.6 cm)
A. Trim kit frame overhang
B. Cutout for lower oven
(91.4 cm)
26
⁷⁄₈
" (68.3 cm)*
29
³⁄₄
" (75.6 cm)**
24" (61.0 cm)
25" (63.5 cm)
A
36"
D. Lower cabinets
E. Floor
WidthWidth
B
C
1⁷⁄₁₆
" (7.3 cm)**
⁷⁄₈
2
(2.2 cm)
3" (7.6 cm)
1⁹⁄₁₆"
(4.0 cm)
¹¹⁄₁₆"
(1.8 cm)
" (3.7 cm)*
⁷⁄₈"
A
B
2"
(5.1 cm)
3"
(7.6 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Observe all governing codes and ordinances.
Required:
■ A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
Recommended:
■ A time-delay fuse or time-delay circuit breaker.
■ A separate circuit serving only this microwave oven.
GROUNDING INSTRUCTIONS
■
For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING: Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.
SAVE THESE INSTRUCTIONS
Microwave Oven Preparation
1. Unplug microwave oven before proceeding with installation.
2. Remove any loose items inside microwave oven.
2