Jenn-Air JUR24FRACX00 Owner’s Manual

JENN-AIR®REFRIGERATOR/

REFRIGERADOR/RI£FRIG12RATEUR

Overlay Model/Modelo recubierto/Modble & panneau d_coratif

USE & CARE GUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR {1-800-536-6242} or visit our website at www.jennair.eom.

In Canada, call: 1-800-JENNAIR {1-800-536-6242}, or visit our website at www.jennair.ea.

MANUALDE USO Y CUIDADO

Si tiene preguntas respecto a las caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, Ilame al:

En CanadA, Ilame al: 1-800-JENNAIR (1-800-536-6247}, o visite nuestro sitio de internet www.jennair.ca.

1-800-JENNAIR (1-800-536-6247} o visite nuestro sitio de internet www.jennair.com.

GUIDE D'UTILISATIONET D'ENTR_I-IEN

Au Canada, pour assistance, installation ou service, composez le 1-800-JENNAIR (1-800-536-6247)

Table of Contents/[ndice/Table des matieres ...................................................................................... 2

ou visitez notre site web & www.jennair.ca.

JENN-AIR °

W10549543A

TABLE OF

REFRIGERATOR SAFETY ........................................................................... 3

Proper Disposal of Your Old Refrigerator ................................................. 3

INSTALLATION REQUIREMENTS ............................................................. 4

Tools and Parts ......................................................................................... 4

Location Requirements ............................................................................. 4

Electrical Requirements ............................................................................ 5

Product Dimensions ................................................................................. 5

Custom Overlay Panel .............................................................................. 5

INSTALLATION INSTRUCTIONS ............................................................... 6

Unpack the Refrigerator ........................................................................... 6

Reverse Door Swing (optional) ................................................................. 7

Install Custom Overlay Panel .................................................................... 8

Door Closing ............................................................................................. 9

REFRIGERATOR USE ................................................................................. 9

Normal Sounds ......................................................................................... 9

Using the Control ...................................................................................... 9

[NDICE

CONTENTS

REFRIGERATOR FEATURES ................................................................... 10

Refrigerator Shelves ............................................................................... 10

DOOR FEATURES ..................................................................................... 10

Door Bins ................................................................................................ 10

Lighting the Refrigerator ......................................................................... 10

REFRIGERATOR CARE ............................................................................ 10

Base Grille ............................................................................................... 10

Cleaning .................................................................................................. 11

Vacation and Moving Care ..................................................................... 11

TROUBLESHOOTING ............................................................................... 12

ASSISTANCE OR SERVICE ...................................................................... 13

In the U.S.A ............................................................................................. 13

In Canada ................................................................................................ 13

WARRANTY ............................................................................................... 14

SEGURIDAD DEL REFRIGERADOR ........................................................ 16

C6mo deshacerse de su viejo refrigerador ............................................ 17

REQUlSITOS DE INSTALACION .............................................................. 17

Piezas y herramientas ............................................................................. 17

Requisitos de ubicaci6n ......................................................................... 17

Requisitos electricos ............................................................................... 18

Medidas del producto ............................................................................. 18

Panel recubierto a la medida .................................................................. 19

INSTRUCCIONES DE INSTALACION ...................................................... 20

Desempaque el refrigerador ................................................................... 20

C6mo invertir el cierre de la puerta ........................................................ 20

C6mo instalar el panel recubierto a la medida ....................................... 22

Cierre de la puerta .................................................................................. 22

USO DE SU REFRIGERADOR .................................................................. 23

Sonidos normales ................................................................................... 23

Uso del control ........................................................................................ 23

TABLE DES MATII RES

S¢:CURIT¢: DU RC:FRIGC:RATEUR ........................................................... 30

Mise au rebut appropriee de votre vieux refrigerateur ........................... 31

EXIGENCES D'INSTALLATION ................................................................ 31

Outillage et pieces .................................................................................. 31

Exigences d'emplacement ..................................................................... 31

Specifications electriques ....................................................................... 32

Dimensions du produit ............................................................................ 32

Panneau decoratif personnalise ............................................................. 33

INSTRUCTIONS D'INSTALLATION ......................................................... 34

Deballage du refrigerateur ...................................................................... 34

Inversion du sens d'ouverture de la porte .............................................. 34

Installation du panneau decoratif personnalise ...................................... 36

Fermeture de la porte ............................................................................. 36

UTILISATION DU REFRIGERATEUR ....................................................... 37

Sons normaux ......................................................................................... 37

Utilisation de la commande .................................................................... 37

CARACTERiSTICAS DEL REFRIGERADOR ........................................... 23

Estantes del refrigerador ........................................................................ 23

CARACTERISTICAS DE LA PUERTA ...................................................... 24

Recipientes de la puerta ......................................................................... 24

C6mo iluminar el refrigerador ................................................................. 24

CUlDADO DEL REFRIGERADOR ............................................................ 24

Rejilla de la base ..................................................................................... 24

Limpieza .................................................................................................. 24

Cuidado durante las vacaciones y mudanzas ....................................... 25

SOLUCION DE PROBLEMAS ................................................................... 25

AYUDA O SERVICIO TECNICO ................................................................ 27

En los EE.UU ........................................................................................... 27

En Canad_ .............................................................................................. 27

GARANTIA ................................................................................................. 28

CARACTC:RISTIQUES DU RC:FRIGC:RATEUR ........................................ 37

Tablettes du refrigerateur ....................................................................... 37

CARACTERISTIQUES DE LA PORTE ...................................................... 38

Balconnets de porte ............................................................................... 38

€:clairage du refrig6rateur ....................................................................... 38

ENTRETIEN DU REFRIGERATEUR ......................................................... 38

Grille de la base ...................................................................................... 38

Nettoyage ............................................................................................... 39

Precautions & prendre pour lesvacances

et avant un dem6nagement .................................................................... 39

DC:PANNAGE ............................................................................................. 40

ASSISTANCE OU SERVICE ...................................................................... 41

Aux €:tats-Unis ........................................................................................ 41

Au Canada .............................................................................................. 41

GARANTIE .................................................................................................. 42

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

SAVE THESE INSTRUCTIONS

• Remove doors from your old refrigerator.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline, away from refrigerator.

• Use two or more people to move and install refrigerator.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

Proper Disposal of

Your Old Refrigerator

Suffocation Hazard

Remove doors from your old refrigerator.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned refrigerators are still dangerous

- even ifthey will sit for "just a few days." If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

• Takeoffthe door.

• Leave the shelves in place so that children may not easily climb inside.

Important information to know about disposal of refrigerants:

Dispose of refrigerator in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed,

EPA certified refrigerant technician in accordance with established procedures.

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation

TOOLS NEEDED:

• Phillips screwdriver

PARTS NEEDED:

Custom Overlay Door Panel--See "Overlay Panel--Rear View." Hardware (Optional)

PARTS SUPPLIED:

• M4 x 14 wood screws (12)

Opening Dimensions

• Height dimensions are shown with the leveling legs extended to the minimum height.

NOTE: When leveling legs are fully extended, add 5/8" (15.9 mm) to the height dimensions. See "Product

Dimensions."

• If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the kitchen floor.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

NOTES:

• For the refrigerator to be flush with the front of the base cabinets remove any baseboards or moldings from the rear of

the opening. See "Product Dimensions" and later in this section "Opening Dimensions."

• It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source.

• Do not install in a location where the temperature will fall below 55°F (13°C). For best performance, do not install the refrigerator behind a cabinet door or block the base grille.

I .........................A

610'n96 cm)

24" (60,96 cm) min.

Critical Dimensions:

A. 14_" (37.5 cm) utility opening B. 24" (60.96 cm) minimum opening width

343/8" (87.3 cm) min.

35" (88.9 cm) max.

I !!

_e©_/©@_ _J£@_s_s _@_@ _'t_as;; Side View (door open 90 °)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an

extension cord. NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, unplug refrigerator or disconnect power.

(121.4 cm)

,_ 473/,¢' >.

26V8"

(66.4 cm)

Top View

237/8''

(60.6 cm)

21%"

(55.0 cm)

• Height dimensions are shown with the leveling legs NOT extended.

• The power cord is 60" (152.4 cm) long.

Front View

m m

30V8"

(76.6 cm)

m i

(87.4 cm)

34V8"

(86.8 cm)

343/8 ''

*Dimension includes _" thick custom door panel

If you plan to install a custom overlay panel, you will need to create the panel yourself or consult a qualified cabinetmaker or

carpenter. See dimension drawings for panel specifications.

IMPORTANT:

• The thickness of the overlay panel must be 3/4"(1.91 cm).

• Overlay panel must not weigh more than 20 Ibs (9.07 kg).

• Overlay panels weighing more than recommended may cause damage to your appliance.

Overlay Panel-- Rear View

Create the custom overlay panel using the dimensions shown. IMPORTANT: The following graphic shows a custom panel for a

door with the hinges installed on the right-hand side. If your refrigerator has the hinges installed on the left-hand side, rotate the custom frame 180 ° so the hinge markings will be on the left.

INSTALLATION

INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see "Refrigerator Safety."

• Dispose of/recycle all packaging materials.

303/ls''

(76.6 crn)

I< 233/4"

A. Drill holes using a '_2" (12 mm) drill bit to a depth of approximately

½" (13 mm) before routing. (4 holes total)

B. Drill holes using a _" (8 mm) drill bit to a depth of approximately

½" (13 mm) before routing. (4 holes total)

C. Drill holes using a Y_" (2.8 mm) drill bit to a depth of approximately

½" (13 mm) before routing. (12 holes total)

D. Rout shaded areas for hinges to a '_2" (15 mm) depth.

E. Rout shaded areas for hinges to a ¼" (4 mm) depth. F. Corner radius of _" (3 mm) using a ¼" drill bit when routing

(5 radiuses total)

(60.3 crn)

When Moving Your Refrigerator: Your refrigerator isheavy. When moving the refrigerator for

cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or "walk" the refrigerator when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in

"Refrigerator Care."

important information to know about glass shelves

and covets:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

The door hinges are factory installed on the right-hand side. If you want the door to open from the opposite direction, you must

reverse the door. IMPORTANT: To avoid strain on the hinges, it is recommended

that you use two people to remove the door. Tools Needed: Phillips screwdriver and a 1/8"hex key wrench.

Remove the Door

Unplug or disconnect power and remove any items that might be stored inside.

Open the door completely to 90 °.

While one person supports the door, remove the screws attaching both the top and bottom hinges to the cabinet.

NOTE: After the screws are removed and the door is pulled away from the cabinet, a plastic spacer, located behind the

bottom hinge, will become free. Set the spacer aside. You will need this spacer when you reinstall the door.

4. Remove the door from the cabinet and gently lay it on a flat surface to avoid damaging the covers attached to the top and bottom hinges.

A. Hinge cover

B. Custom overlay door frame

Reinstall the screws into the holes remaining after the hinges are removed from the cabinet.

If a wooden overlay panel has been previously installed, remove the panel. See "Install Custom Overlay Frame."

Reverse the Door

Remove the screws attaching the black, metal L-beams to the top and bottom of the door.

Remove the screw attaching the metal light switch plate to the center of the bottom L-beam. Remove the light switch plate.

NOTE: The light switch plate is attached with both a screw and adhesive tape. It may require some force to remove it

from the L-beam.

A. Light switch plate B. Bottom L-beam

C. Top L-beam

3. Remove the two metal, L-beams from the door noting which L-beam was on the top and which was on the bottom.

4. Move the L-beams to the opposite ends of the door with the hinges now on the left-hand side (asyou are facing the front of

the door).

A. Bottom L-beam B. Top L-beam

Using the screws removed in Step 1, reinstall the L-beams, to their new location on the door.

Using the screw removed in Step 2 and the adhesive tape included in the door installation kit, reinstall the light switch plate onto the bottom of the door.

7. Reinstall the overlay panel, if removed earlier. See "Install Custom Overlay Frame."

Replace the Door

1. Make sure the hinge covers are still attached to the L-beams.

2. Remove the screws from the both the top and bottom of the opposite side of the cabinet.

3. Align the holes in the hinges with the holes in the cabinet.

IM PORTANT:

• Create custom overlay panel according to the specifications in the "Custom Overlay Panel" section.

• Jenn-Air is not responsible for the removal or addition of molding or decorative panels that would not allow access to the refrigerator for service.

Install Custom Frame

Open the door completely to 90°.

A. Hinge screws removed in Step 2 B. Holes in cabinet

Using the screws removed in Step 2, loosely fasten the door to the left-hand side of the cabinet.

For the bottom hinge only, slide the plastic spacer, with the slots facing downward, between the bottom hinge and the

cabinet. NOTE: The slots inthe spacer go around the screws.

Using two people, hold the wooden frame so that the holes in the frame align with the holes at the top and bottom of the

door. Then, fasten the custom frame to the door using six wood screws at the top and six wood screws at the bottom.

A.M4 x 10wood screws

Check that the custom frame is aligned with the door and completely tighten the 12 screws.

A.Bottom hinge spacer

6. Fully tighten the screws.

Door Closing

l_i:/@S //1;t

REFRIGERATORUSE

Your refrigerator has four leveling legs. If your refrigerator seems unsteady or you want the door to close more easily, adjust the refrigerator's tilt using the instructions below.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be

concerned about them. Most of the new sounds are normal. Hard surfaces, such as the flooring and surrounding structures, can make the sounds seem louder. The following describes the kinds

of sounds and what may be making them.

• Your refrigerator is designed to run more efficiently to keep your food items at the desired temperatures and to minimize

energy usage. The high efficiency compressor and fans may cause your refrigerator to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.

• Rattling noises may come from the flow of refrigerant or items stored inside the refrigerator.

• As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator.

• You may hear water running into the drain pan when the refrigerator is defrosting.

• You may hear clicking sounds when the refrigerator starts or stops running.

The control is located behind the base grille. Lift up on the door in the center of the grille to access the control.

For your convenience, your refrigerator temperature control is preset at the factor),. When you first install your refrigerator, make sure that the control is still preset to the mid-setting as shown.

Move the refrigerator into its final location.

Turn the leveling legs to the right to lower the refrigerator or turn the leveling legs to the left to raise it. It may take several

turns of the leveling legs to adjust the tilt of the refrigerator. NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling legs. This makes it easier to adjust the leveling legs.

Open the door again to make sure that it closes as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both front leveling screws to the left. It may take

several more turns, and you should turn both leveling legs the same amount.

Adjusting Controls

The mid-setting should be correct for normal usage. The control is set correctly when beverages are as cold as you like.

If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature.

To make the refrigerator colder, adjust the control to the next higher setting. To make the refrigerator less cold, adjust the control to the next lower setting.

REFRIGERATORFEATURES DOOR FEATURES

Important information to know about glass shelves

an_ covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

' S se yes

To Remove or Adjust Upper Shelves:

1. Remove the shelf by lifting it up and out of the shelf brackets.

2. Remove the two shelf brackets and reposition them in the desired location.

3. Replace the shelf by inserting it into the shelf brackets. NOTE: Be sure the shelf is level.

D@@_ _ B __S;v__':"

Your refrigerator has two door bin locations for maximum storage capacity.

To Remove and Replace the Door Bins:

1. Remove the door bin by tilting it forward and pulling it out.

2. Replace the bin by placing the rear of the bin under the support on the door and sliding into place.

The refrigerator has an interior light that comes on any time the door is opened.

NOTE: The light is an LED which does not need to be replaced. If the LED does not illuminate when the door is opened, call Service

to replace the light. See Assistance or Service for contact information.

To Remove and Replace Lower Shelf:

1. The very bottom glass shelf slides straight out.

2. Replace the shelf by aligning the edges with the guides and pushing it in toward the back of the refrigerator.

REFRIGERATORCARE

Base

You must remove the base grille to access the condenser coils for cleaning.

To remove the base grille:

1. Open the refrigerator door.

2. Using a Phillips screwdriver, remove the two screws. Push both tabs in toward the center to release the base grille from

the refrigerator.

".............................................. _::::: %,_.......... d-d--r:::_ %

..........,.,<,.,<,.,< < ,,,

A B A

A. Tabs B. Screws

3. Remove the base grille.

To replace the base grille:

1. Open the refrigerator door.

2. Position the base grille so that both tabs align and the base grille snaps into place. Replace the two screws. Tighten the screws.

Explosion Hazard

Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

Vacations

If you choose to leave the refrigerator on while you're away, use up any perishables and freeze other items.

If you choose to turn the refrigerator off before you leave, follow these steps.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean the refrigerator. See "Cleaning."

4. Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building up.

Clean the refrigerator about once a month to avoid buildup of odors. Wipe up spills immediately.

To clean your refrigerator:

1. Unplug refrigerator or disconnect power.

2. Remove all removable parts from inside, such as shelves, etc.

3. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

• Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.

• To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs to 1 qt [26 g to 0.95 L] of water).

Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners containing

chlorine. These can scratch or damage materials. Dry thoroughly with a soft cloth.

NOTE: To keep your stainless steel refrigerator looking like new and to remove minor scuffs or marks, it is suggested that

you use the manufacturer's approved Stainless Steel Cleaner and Polish. To order the cleaner, see "Accessories."

IMPORTANT: This cleaner is for stainless steel parts only! Do not allow the Stainless Steel Cleaner and Polish to come

into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If unintentional contact does occur, clean plastic part with a sponge and mild

detergent in warm water. Dry thoroughly with a soft cloth.

Replace the removable parts.

Clean the condenser coils regularly. They are located behind the base grille. Coils may need to be cleaned as often as every other month. This may help save energy.

• Remove the base grille. See "Base Grille."

• Use a vacuum cleaner with an extended attachment to

clean the condenser coils when they are dusty or dirty.

• Replace the base grille.

7. Plug in refrigerator or reconnect power.

Moving

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1. Remove all food from the refrigerator.

2. Unplug the refrigerator.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the back of the refrigerator.

When you get to your new home, put everything back and refer to the "Installation Instructions" section for preparation instructions.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.

Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit.

Is the Refrigerator Control turned to the OFF position? See

"Using the Control."

The motor seems to run too much

Is the temperature outside hotter than normal? Expect the

motor to run longer under warm conditions. At normal outdoor temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more of the time.

Has a large amount of food just been added to the refrigerator? Adding a large amount of food warms the

refrigerator. It is normal for the motor to run longer in order to cool the refrigerator back down.

Is the door opened often? Expect the motor to run longer when this occurs. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food

organized so it is easy to find, and close the door as soon as the food is removed.

Is the control set correctly for the surrounding conditions? See "Using the Control."

Is the door closed completely? Push the door firmly shut. If it will not shut all the way, see "The door will not close completely" later in this section.

Are the condenser coils dirty? This obstructs air transfer and makes the motor work harder. Clean the condenser coils. See

"Cleaning."

Temperature is too warm

Is the door opened often? Be aware that the refrigerator will

warm when this occurs. In order to keep the refrigerator cool, try to get everything you need out of the refrigerator at once,

keep food organized so it is easy to find, and close the door as soon as the food is removed.

Has a large amount of food just been added to the refrigerator? Adding a large amount of food warms the

refrigerator. It can take several hours for the refrigerator to return to the normal temperature.

Is the control set correctly for the surrounding conditions? See "Using the Control."

Is the base grille blocked? For best performance, do not install the refrigerator behind a cabinet door or block the base grille.

There is interior moisture buildup

Is the door opened often? To avoid humidity buildup, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. When the door is opened,

humidity from the room air enters the refrigerator. The more often the door is opened, the faster humidity builds up, especially when the room itself is very humid.

Is it humid? It is normal for moisture to build up inside the refrigerator when the air is humid.

Is the food packaged correctly? Check that all food is securely wrapped. Wipe off damp food containers before placing in the refrigerator.

Is the control set correctly for the surrounding conditions? See "Using the Control."

The door is difficult to open

Explosion Hazard

Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

• Is the gasket dirty or sticky? Clean the gasket and the surface that it touches. Rub a thin coat of paraffin wax on the

gasket following cleaning.

The door will not close completely

Are food packages blocking the door open? Rearrange

containers so that they fit more tightly and take up less space. Are the shelves out of position? Put the shelves back into

their correct positions. See "Refrigerator Use" for more information.

ASSISTANCE OR SERVICE

Explosion Hazard

Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

• Is the gasket sticking? Clean the gasket and the surface that it touches. Rub a thin coat of paraffin wax on the gasket

following cleaning.

Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If you

still need help, follow the instructions below. When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new Jenn-Air ®

appliance. To locate factory specified replacement parts in your area, call us

or your nearest designated service center.

Call the Jenn-Air Customer eXperience Center toll free: 1-800-JENNAIR (1-800-536-6247).

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.).

• Referrals to local dealers, repair parts distributors, and service companies. Jenn-Air designated service technicians are trained to fulfill the product warranty and provide after- warranty service, anywhere in the United States.

To locate the Jenn-Air designated service company in your area, you can also look in your telephone directory Yellow Pages.

For further assistance If you need further assistance, you can write to Jenn-Air with any

questions or concerns at:

Jenn-Air Brand Home Appliances Customer eXperience Center

553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Call the Jenn-Air Canada Customer eXperience Centre toll free: 1-800-JENNAIR (1-800-536-6247).

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Use and maintenance procedures.

• Accessory and repair parts sales. Referrals to local dealers, repair parts distributors, and

services companies. Jenn-Air Canada designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in Canada.

For further assistance If you need further assistance, you can write to Jenn-Air Canada

with any questions or concerns at:

Jenn-Air Canada Customer eXperience Centre

200 - 6750 Century Ave. Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

JENN-AIR®REFRIGERATORWARRANTY

FIRST YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Jenn-Air brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter "Jenn-Air") will pay for factory specified replacement parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was

purchased.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CAVITY LINER AND SEALED REFRIGERATION SYSTEM

In the second through fifth years from the date of purchase, when this major appliance is installed, operated and maintained according to the instructions attached to or furnished with the product, Jenn-Air brand will pay for factory specified replacement parts and repair labor

for the following components to correct non-cosmetic defects in materials and workmanship in this part that prevent function of the refrigerator and that existed when this major appliance was purchased:

• Refrigerator/freezer cavity liner if the part cracks due to defective materials or workmanship.

• Sealed Refrigeration system (includes compressor, evaporator, condenser, dryer and connecting tubing).

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THE LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. Service must be provided by a designated Jenn-Air service company. This limited warranty is valid in the United States or Canada and

applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of the original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.

2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing.

3. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty coverage.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by Jenn-Air.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage results from defects in materials or workmanship and is reported to Jenn-Air within 30 days from the date of purchase.

6. Any food or medicine loss due to refrigerator or freezer product failures.

7. Pickup and delivery. This major appliance is intended to be repaired in your home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Jenn-Air servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with Jenn-Air's published installation instructions.

11. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined.

12. Discoloration, rust or oxidation of stainless steel surfaces.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty

gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Jenn-Air makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with

this major appliance, you should ask Jenn-Air or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. JENN-AIR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the

exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

If outside the 50 United States and Canada, contact your authorized Jenn-Air dealer to determine if another warranty applies. If you think you need repair service, first see the "Troubleshooting" section of the Use & Care Guide. If you are unable to resolve the problem

after checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling us at

1-800-JENNAIR (1-800-536-6247). 4/13

+ 30 hidden pages