Jenn-Air JS42PPDUDB16, JS42PPDUDB20, JS42SEDUDW15, JS42SEDUDW20, JS48PPDUDB14 Installation Guide

...

JENN-AIR_SIDEBYSIDEBUILT-INREFRIGERATOR

REFRIGERADOREMPOTRADO

DEDOS_ERTASJENN-AII_

INSTALLATIONGUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.

GUIIA DEINSTALACION

Si tiene preguntas respecto alas caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, Ilame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

En CanadA, Ilame al: 1-800-807-6777, o visite nuestro sitio de internet: www.jennair.ca.

GUIDED'INSTALLATION

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web & www.jennair.ca.

Table of Contents/[ndice/Table des matieres ...................................................................................... 2

JENN-AIR°

W10555565A

TABLEOF CONTENTS

REFRIGERATOR SAFETY ............................................................. 3

MODELS .......................................................................................... 4

INSTALLATION REQUIREMENTS ................................................ 6

Tools and Parts ............................................................................ 6

Location Requirements ................................................................ 6

Electrical Requirements ............................................................... 7

Water Supply Requirements ........................................................ 8

Tipping Radius ............................................................................. 8

Product Dimensions ..................................................................... 9

Door Swing Dimensions ............................................................. 10

Overlay Series Door Panel and Cabinetry Clearance ................ 11

Overlay Series Custom Panels and Handle Kits ....................... 13

Euro-Style and Pro-Style ®Custom Side Panels ........................ 14

Overlay Series Custom Side Panels .......................................... 15

[NDICE

SEGURIDAD DEL REFRIGERADOR ........................................... 24

MODELOS ..................................................................................... 25

REQUlSITOS DE INSTALACION ................................................. 27

Herramientas y piezas ................................................................ 27

Requisitos de ubicacion ............................................................. 27

Requisitos electricos .................................................................. 28

Requisitos del suministro de agua ............................................. 29

Arco de vuelco ........................................................................... 29

Medidas del producto ................................................................ 30

Medidas de oscilacion de las puertas ....................................... 31

Espacio para el panel de la puerta y para los armarios

de la serie de paneles recubiertos ............................................. 32

Paneles a la medida y juegos de manijas

de la serie de paneles recubiertos ............................................. 34

Paneles laterales a la medida Euro-Style y Pro-Style ®.............. 36

Paneles laterales a la medida para la

serie de paneles recubiertos ...................................................... 36

INSTALLATION INSTRUCTIONS ................................................ 16

Unpack the Refrigerator ............................................................. 16

Reduce Tipping Radius .............................................................. 16

Move the Refrigerator into House .............................................. 17

Install Anti-Tip Boards ................................................................ 17

Connect the Water Supply ......................................................... 18

Plug in Refrigerator..................................................................... 19

Move Refrigerator to Final Location........................................... 19

Level and Align Refrigerator ....................................................... 19

Install Overlay Series Custom Panels ........................................ 20

Adjust Doors ............................................................................... 21

Install Side Panel ........................................................................ 22

Install Base Grille ........................................................................ 22

Complete Installation .................................................................. 23

Water System Preparation ......................................................... 23

INSTRUCCIONES DE INSTALACION ......................................... 37

Desempaque el refrigerador ...................................................... 37

Como reducir el arco de vuelco ................................................. 38

Como hacer entrar el refrigerador en la casa ............................ 38

Como instalar los tableros antivuelco ........................................ 38

Conexion del suministro de agua .............................................. 39

Como enchufar el refrigerador ................................................... 40

Como mover el refrigerador a su ubicacion final ....................... 41

Nivelacion y alineamiento del refrigerador ................................. 41

Como instalar los paneles a la medida para

la serie de paneles recubiertos .................................................. 42

Ajuste las puertas ....................................................................... 43

Como instalar el panel lateral ..................................................... 44

Como instalar la rejilla de la base .............................................. 44

Como terminar la instalacion ..................................................... 45

Preparacion del sistema de agua .............................................. 45

TABLEDESMATIERES

SI_CURITI_ DU RI_FRIGI_RATEUR .............................................. 46

MODI=LES ..................................................................................... 47

EXIGENCES D'INSTALLATION ................................................... 49

Outillage et pieces ...................................................................... 49

Exigences d'emplacement ......................................................... 49

Specifications electriques .......................................................... 50

Specifications de I'alimentation en eau ..................................... 51

Rayon de basculement .............................................................. 51

Dimensions du produit ............................................................... 52

Dimensions pour le pivotement des portes ............................... 53

serie Panneaux decoratifs--Panneau de porte et placard--

espace libre ................................................................................ 54

Panneaux personnalises et poignees de la serie Panneaux

decoratifs .................................................................................... 56

Panneaux lateraux personnalises des

Style Euro, et Pro-Style ®............................................................ 58

Panneaux lateraux personnalises

de la serie Panneaux decoratifs ................................................. 58

INSTRUCTIONS D'INSTALLATION ............................................. 59

Deballage du r6frigerateur .......................................................... 59

Reduction du rayon de basculement ......................................... 60

Faire entrer le refrig6rateur dans le domicile ............................. 60

Installation de planches antibasculement .................................. 60

Raccordement & I'alimentation en eau ...................................... 61

Branchement du r6frigerateur .................................................... 62

Deplacement du refrig6rateur & I'emplacement final................. 63

Reglage de I'aplomb et alignement du refrig6rateur ................. 63

Installation des panneaux personnalises

de la serie Panneaux decoratifs ................................................. 64

Ajustement des portes ............................................................... 65

Installation du panneau lateral ................................................... 66

Installation de la grille de la base ............................................... 66

Achever I'installation .................................................................. 67

Preparation du systeme d'eau ................................................... 67

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not compJetely instaJJed.

Keep doors taped closed until refrigerator is compJetely instaJJed.

Use two or more people to move and instaJJ refrigerator.

Failure to do so can result in death or serious injury.

Non-Dispensing Refrigerators

MODELS

Euro-Style Design

Features stainless steel wrapped doors with towel bar handles. JS42SEFXDB JS48SEFXDB

Pro-Style ®Design Features stainless steel wrapped doors and Pro-Style ®handles

with diamond-etched grip. JS42PPFXDB JS48PPFXDB

Overlay Design Uses custom-made panels and custom hardware for a seamless

appearance designed to blend with existing kitchen cabinetry. JS42CXFXDB JS48CXFXDB

Dispensing Refrigerators

Euro-Style Design

Features stainless steel wrapped doors with towel bar handles. JS42SEDUDB JS48SEDUDB

Pro-Style ®Design Features stainless steel wrapped doors and Pro-Style ®handles

with diamond-etched grip. JS42PPDUDB JS48PPDUDB

Overlay Design Uses custom-made panels and custom hardware for a seamless

appearance designed to blend with existing kitchen cabinetry. JS42CXDBDB JS42CXDUDB

JS48CXDBDB JS48CXDUDB

INSTALLATIONREQUIREMENTS

IMPORTANT:

• Installer: Leave Installation Instructions with the homeowner.

• Homeowner: Keep Installation Instructions for future reference. Save these Installation Instructions for the local

electrical inspector's use.

Tools Needed Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed here.

• Cordless drill

• Drill bits

• Adjustable wrenches (2)

• Phillips screwdriver

• Small level

• Appliance dolly

Parts Needed

• #8 x 3" (7.6 cm) wood screws (longer screws may beneeded) (6)

• 2" x 4" x 32" (5cm x 10 cm x 81 cm) wood board(s) (1 or 2)

• Overlay Series: Make custom panels, or consult a qualified cabinetmaker or carpenter to make the panels. See "Overlay

Series Custom Panels" for more information. Pro-Style ®and Euro-Style Series are shipped complete.

• If you are connecting the water line directly to copper tubing and not to a shutoff valve, you need a ferrule, a union, and a V4"(6.35 mm) compression fitting.

• Torx®tT27 screwdriver

• 1%2"nut driver

• 3/8"and V2"open-end wrenches

• %2" hex key

• V4"and sAe"socket drivers

• Tape measure

• Utility knife

The refrigerator can be recessed in an opening between cabinets or installed at the end of a cabinet run using a side panel to enclose the refrigerator.

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IM PORTANT:

• Observe all governing codes and ordinances.

• It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source.

• Do not install in a location where the temperature will fall below 55°F (13°C).

• Floor must support the refrigerator weight, more than 600 Ibs (272 kg), door panels and contents of the refrigerator.

• Ceiling height must allow for side tipping radius. See "Tipping Radius."

• Location should permit door to open fully. See "Door Swing Dimensions."

• Location must permit top grille removal. See "Opening Dimensions."

I"®TORX is a registered trademark of Saturn Fasteners, Inc.

Opening Dimensions

To avoid tipping during use, the solid soffit must be within 1" (2.5 cm) maximum above the refrigerator. If the solid soffit is higher than 1" (2.5 cm) or one is not available, then the refrigerator must be braced.

If the anti-tip boards are needed, they must be attached to the rear wall studs 80" to 90" (203 cm to 229 cm) above the floor. See "Install Anti-Tip Boards" for more information.

NOTE: A clearance of _/2"(1.3 cm) must be maintained above the top grille in order for the top grille to be removed.

A grounded 3 prong electrical outlet should be located within a specified number of inches from the right-hand side cabinets or end panel. See the chart following the graphic for the number of inches required for your model. For more information, see "Electrical Requirements."

Thewatershutoffshouldbelocatedinthebasecabineton eithersideoftherefrigeratororsomeothereasilyaccessible

area.Ifthewatershutoffvalveisnotinthecabinets,the plumbingforthewaterlinecancomethroughthefloororthe backwall.See"WaterSupplyRequirements"formore

information.

ii 80" - 90"

i i(203-229 cm)

Dimension

31/2" (212.1 cm) ram.

843/4" (215 cm) max. to bottom of solid soffit

77"

(196 cm)

Width

(see chart following)

15.2 cm]

(2.54 cm)

24"

(60.96 cm) rain.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical

connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an

extension cord. IMPORTANT: If this product is connected to a GFCI (Ground

Fault Circuit Interrupter) protected outlet, nuisance tripping of the power supply may occur, resulting in loss of cooling. Food quality and flavor may be affected. If nuisance tripping has occurred, and if the condition of the food appears poor, dispose of it.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, remove the top grille and turn the master power switch to OFF or disconnect power at the circuit breaker

box. When you are finished, turn ON the master power switch or

reconnect power at the circuit breaker box. Then reset the control to the desired setting.

Width A Width A for Dimension B (as shown Overlay Models (as shown

Model above) (as shown above) above)

48 471/2"to 473/4" 473/4"to 48" 16" (40.6 cm)

NOTE: Flooring under refrigerator must be at same level as the room. Face of cabinetry must be plumb.

411W'to413/4" 413/4"to 42" (106 cm 10"(25.4cm) (105.4 cm to to 106.7 cm)

106 cm)

(120.7 cm to (121.3 cm to

121.3 cm) 121.9 cm)

Water Pressure

Allinstallationsmustmeetlocalplumbingcoderequirements. Thewatershutoffshouldbelocatedinthebasecabineton

eithersideoftherefrigeratororsomeothereasilyaccessible area.Theright-handsideisrecommended.Theaccesshole throughthecabinetmustbewithin1/2"(12.7mm)oftherear

wall. NOTE:Ifthewatershutoffvalveisinthebackwallbehindthe

refrigerator,itmustbeatananglesothatthetubeisnot kinkedwhentherefrigeratorispushedintoitsfinallocation.

• Ifthewatershutoffvalveisnotinthecabinets,theplumbing forthewaterlinecancomethroughthefloor.A1/2"(12.7mm) holeforplumbingshouldbedrilledatleast6"(15.2cm)from therightorlefthandsidecabinetorpanel.Onthefloor,the holeshouldbenomorethan1"(2.54cm)awayfromtheback wall.See"ConnecttheWaterSupply."

• Ifadditionaltubingisneeded,usecoppertubingandcheck forleaks.Installthecoppertubingonlyinareaswherethe householdtemperatureswillremainabovefreezing.

• Donotuseapiercing-typeor3/le"(4.76mm)saddlevalve whichreduceswaterflowandclogsmoreeasily.

NOTE:Yourrefrigeratordealerhasakitavailablewitha1/4" (6.35mm)saddle-typeshutoffvalve,aunion,andcopper tubing.Beforepurchasing,makesureasaddle-typevalve complieswithyourlocalplumbingcodes.

A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. Ifyou have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill after heavy usage.

• If your refrigerator has a water filter cartridge, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter cartridge.

If you have questions about your water pressure, call a licensed, qualified plumber.

Rc_dt s

Be sure there is adequate ceiling height to stand the refrigerator upright when it is moved into place.

• The dolly wheel height must be added to the tipping radius when a dolly is used.

• If needed, the tipping radius can be reduced. See "Reduce Tipping Radius."

Side Tipping Radius

The side tipping radius varies depending upon the width of the model. Use the chart provided to determine the side tipping

radius. NOTE: Tip on side only.

s II

i I

Model Tipping Radius A 42 93" (236.2 cm) 48 96" (243.8 cm)

,J_ tiSC_t__°°'_,,,,.......;_........

Side View

• The depth from the front of the top grille to the back of the refrigerator cabinet is 253/8"(64.5 cm) for Euro and Pro-Style ®. The Overlay style depth is 251/8'' (63.8 cm) without custom panels.

• The power cord is 84" (213 cm) long.

• The water line attached to the back of the refrigerator is 5 ft (1.5 m) long.

• Height dimensions are shown with leveling legs extended 1A" (3 mm) below the rollers.

Euro-Style and Pro- Style ®

25%"

(64.5 crn) --_

3,/8"

(9.53 rnrn)

Overlay Style

"833/8"

(211.8 crn)

*83s/a''

(211.8 crn)

84" (213.4 crn) Power Cord

*When leveling legs are fully extended to 1V4"(3.2 cm) below

rollers, add 1V8"(2.9 cm) to the height dimensions.

*When leveling legs are fully extended to 1V4"(3.2 cm) below

rollers, add 1_A" (2.9 cm) to the height dimensions.

Top View

Euro-Style and Pro-Style ®

241/8"

(61.3 crn)

'TT

(60.3 crn)

231/2''

(59.7 crn)

231¼e, '

Model A B

42 Euro-Style 41" (104.1 cm) 21/8"(5.3 cm) 48 Euro-Style 47" (119.4 cm) 21/8'' (5.3 cm) 42 Pro- Style e 41" (104.1 cm) 25/8'' (6.67 cm) 48 Pro- Style ® 47" (119.4 cm) 2s/8'' (6.67 cm)

Overlay Style

(60.16 crn)

D SwngDme;,sons

The location must permit both doors to open to a minimum of 90°. Allow 41/2'. (11.4 cm) minimum space between the side of the refrigerator and a corner wall.

NOTE: More clearance may be required if you are using overlay panels, custom handles, or extended handles.

To adjust the door swing, see "Adjust Doors."

42 41" (104.1cm)

48 47" (119.4 cm)

Front View

• Width dimensions were measured from trim edge to trim edge.

• Height dimensions are shown with leveling legs extended 1/8" (3 mm) below the rollers.

I I

I[ ]

Model Width A

42" (106.7 cm) Models

371/4"

(94.6 crn)

(105.1crn)

41%"

--_._,_

Model A B Pro-Style ® 103/4'' (27.11 cm) 141/4'' (36.11 cm)

Euro

48" (121.9 cm) Models

101/4'' (25.87 cm) 133/4'' (34.88 cm)

"833/8" (211.8 crn)

(seechart following)

Model Width A (Trim edge to trim edge) 42 421/4"(107.3 cm) 48 481/4'' (122.6 cm)

*When leveling legs are fully extended to 1V4" (3.2 cm) below

rollers, add 1V8"(2.9 cm) to the height dimensions.

Model A B Pro-Style® 123/16'' (30.84cm) 161/4'' (41.16cm)

Euro 115/8'' (29.43 cm) 1511/16'' (39.75 cm)

The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see "Door Swing 90 °,' on next page.

Door Swing 110°

Actual Size

Refrigerator to

Cabinetry Clearance

Refrigerator

Side Trim

Hinge

NOTE: For Overlay Series models, rout the hinge side of the custom door panels to a radius that is equal to at least half the

thickness of the panel if a 130° door swing is desired. See "Adjust Doors."

When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.

Panel

]

90° Door

Stop Position

Refrigerator Side Trim

(1.9 cm)

1/ . ,

/2 '

(1.3,cm)i

) )

I I I I

Door Swing 90°

Actual Size

Refrigerator to Cabinetry Clearance

l lm

(2.5 cm)

3/4ram

1/4"(6.35 mm)

Hinge

1/2"

(1.3cm)

3/4"

(1.9cm) i

( 1"

1/2"(1.3 cm)

3/4"(1.9 cm)

1" (2.5 cm)

(2.5cm)

11/4"

(3.2 cm)

O O

11/2

(3.8 cm)

Spacer Panel

Allow a minimum of 41/2'' (11.4 cm) of space between the side of the refrigerator and a corner wall. More clearance may be needed if thicker custom panels or custom handles are used. Do not overlook baseboards.

Custom overlay panels allow you to blend the exterior of your refrigerator into the overall kitchen decor, and to use custom handles for additional design flexibility.

The custom panels must have backer panels attached in order to mount them to the refrigerator. It is most common to work with three panels, as shown in the following graphic: a decorative overlay panel, a 1/8"(3.18 mm) spacer panel or spacer strips and a 1/4" (6.35 mm) backer panel.

In some cases, your cabinet manufacturer may choose to work with one panel routed for the different dimensions. Follow these panel dimension and placement instructions to be sure that the custom overlay panels will fit properly.

IM PORTANT:

• The weight of the refrigerator door overlay panel cannot exceed 50 Ibs (23 kg).

• The weight of the freezer door overlay panel cannot exceed 40 Ibs (18.1 kg).

• The weight of the top grille overlay panel cannot exceed 10 Ibs (4.5 kg).

To minimize panel weight, you may use 2" (5.08 cm) spacer strips around the perimeter in place of full-sheet solid spacer panels. The spacer strips must be set in at least 1" (2.54 cm) from the top, bottom and sides edges of the backer panel. If you use spacer strips, it is also recommended that you use two 2" (5.08 cm) strips horizontally centered for added support.

Overlay Panel

Spacer Panel I

Spacer Panel

Ti Owra ane

1/8"

-_- ,

l ( BackerPanel

LJ- 1" minimum .

I (2.54 cm_ ......

I _---_-<door/G ri,,eTrin_

_( _ Offset D mens on

(15.88 to 1/8" (6.35 ram)

19.05 ram) (3.18 ram)

Decorative Overlay Panel

7¼" I

(18.4era)I GrillePanel 1

Freezer

Door Pane(

Preferred

Radius

1/2,,

(1.27 cm)

141/4"

(36.2 cm)

337/8"

(86.0cm)

Model A B C

42 171/4" 231/4" 403/4"

48 193/4" 263/4" 463/4"

(Dispenser)

,_- 10T/a,,.-_.

(27.6cm) 7 " DFreezerr.P_I Refrigerator

(183 cm)(Non°._ris er)

pen: DoorPanel

Dispenser cutout is

centered left-to-right

(43.82 cm) (59.06 cm) (103.51 cm)

(50.17 cm) (67.95 cm) (118.75 cm)

*Represents placement of dispenser overlay.

Backer Panels

Dispenser Frame (dispenser models only)

NOTES:

• Dashed lines represent backer panel placement.

• Illustration shows backer panels placed on decorative overlays.

63/le '' i

(15.7 ore) [ ....

Top Offset

5/a ' (4.13 cm)

..... I

22"

(55.9cm)

701/2" (179.1 cm)

=f .....

331/4"

c "1

_t' _ll e Offset

Bottom Offset _ 1/2"(12.7 ram) 1/2" (1.27 cm)

I I I I m

Handle-

Side Offset

1/4,,

(6.4 ram)

701/2" (179.1 cm)

(84.5cm)

The dispenserframe attaches to the panel with 4 screws.

_'(- -- A --_ _'_ -- B ---_

__"_t___- _ _t.......

__. Bottom Offset E Bottom Offset ]

1/8" (3.2 mm) 1/8" (3.2 mm)

Model A B C

42 163/4'' 223/4'' 393/4''

(42.55 cm) (57.79 cm) (100.97 cm)

48 191/4" 261/4" 453/4"

(48.9 cm) (66.68 cm) (116.21 cm)

A. Decorative panel B. Refrigerator door

C. Dispenser frame

The dispenser frame overlaps the dispenser cutout by sAe" (0.78 cm) on each side and 1/2"(1.27 cm) on the top and bottom.

i_ _ " _/ ¸ i¸ i

il;_! iii;/ iiAi _i_ii

" / is _, U

ii ii ii Ii ki iJ (} ii !I Ii i] ii

A. ½" (1.27 cm) overlap

; ii ii i/

CII) t;1 #='_;;_'_Fi(_)ISI, =

Custom side panels may be needed when not enough space is available to have cabinets on both sides of the refrigerator or

when the refrigerator is placed at the end of a cabinet run. You may choose an Inset, Flush, or Recessed Inset panel installation.

Refrigerator and Side Trim Dimensions

The width and height of a side panel are determined by the type of installation you are planning.

NOTES:

• The dimensions shown are actual product dimensions and may not reflect the needed panel installation dimensions.

• The side panel should be a minimum of 1/2"(1.27 cm) thick to avoid warping.

• If the opening depth is 25" (63.5 cm) or more, you may want to install a support board on rear wall.

Refrigerator

Recessed Inset Installation Dimensions

241/8"

(61.3 cm)

(60.3cm)

23W'

(59.7 cm)

Side Trim

(6.35 rnrn)

1%2" (10 ram) v/8

(15.7 rnm)

Inset Installation Dimensions

Measure the distance from point A (as shown) to the back wall. Add 7/32"(5.6 mm) to this measurement to allow the side

panel to fit into the trim.

If the panel is more than 1/4"(6.35 mm) thick, route the front edge to allow the side panel to fit into the trim.

1. Measure the distance from point A (as shown) to the back wall.

2. Route the front edge of the support board or attach a 1/4" (6.35 mm) board to hold the panel in the cabinet side trim.

Custom side panels may be needed when not enough space is available to have cabinets on both sides of the refrigerator or when the refrigerator is placed at the end of a cabinet run. You may choose an Inset or Recessed Inset panel installation.

Refrigerator and Side Trim Dimensions

The width and height of a side panel are determined by the type of installation you are planning.

NOTES:

• The dimensions shown are actual product dimensions

and may not reflect the needed installation dimensions. The side panel should be a minimum ofl/2 '' (1.27 cm) thick

to avoid warping.

If the opening depth is 25" (63.5 cm) or more, you may

want to install a support board on rear wall.

Refrigerator

Overlay

Flush Installation Dimensions

1. Measure the distance from point A (as shown) to the back wall.

2. Attach the support board with a screw or adhesive that is compatible with aluminum and wood.

2311/le ''

(60.16 crn)

Side Trim 2. If the panel is more than 3/8"(9.5 mm) thick, route the front

edge to allow the side panel to fit into the trim.

3/8"

(9.7 rnrn)

Recessed Inset Installation Dimensions

1/16"

(1.5 mm)

1. Measure the distance from point A (as shown) to back wall.

2. Route the front edge of the support board or attach a 3/8" (9.5 mm) board to hold the panel in the cabinet side trim.

3/32"

(2.38 rnrn)

Inset Installation Dimensions

1. Measure the distance from point A (as shown) to the back wall. Add 1/32"(0.8 mm) to this measurement to allow the side panel to fit into the trim.

INSTALLATIONINSTRUCTIONS

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

A m

1. Remove and save the literature package bag taped to the side of the refrigerator and the parts bag behind the grille. Remove the four brackets (two on each side) that attach the shipping base to the refrigerator bottom.

NOTE: Do not remove tape and door bracing until the refrigerator is in its final location.

2. If necessary, reduce the tipping radius. See "Tipping Radius" for ceiling height requirements or "Reduce Tipping Radius" for step-by-step instructions. If you do not need to reduce the tipping radius, proceed to "Move the Refrigerator into

House."

Before bringing the refrigerator into the home, be sure there is adequate ceiling height to stand the refrigerator upright. See "Tipping Radius" in the "Installation Requirements" section for

more information. If you do not have adequate ceiling height to stand the

refrigerator upright, the tipping radius can be reduced by removing the top grille and side trims (see the following chart).

IMPORTANT:

• Do not remove the film covering until the refrigerator is in its operating location.

• All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.

• Keep the cardboard shipping piece or plywood under the refrigerator until it isinstalled in the operating location.

Model Reduced Tipping Radius

42 881/2'' (224.8cm)

48 891/4'' (226.7 cm)

1. Grasp both ends of the top grille.

Push the top grille straight up; then pull straight out. Lay the grille on a soft surface.

B A B

2. Place pieces of the shipping carton on the floor when rolling the dolly and refrigerator into the house. Move the refrigerator close to the built-in opening.

3. Place top of cardboard carton or plywood under refrigerator.

4. Stand the refrigerator up. First, place the left bottom edge of the refrigerator on the floor, stand the refrigerator upright and then lower the right-hand side of the refrigerator to the floor.

5. Reassemble the trim and top grille after the dolly has been removed from the refrigerator.

A. Top grille B. Cabinet side trim

Remove the six screws attaching each cabinet side trim to the refrigerator and remove the side trims.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

f"s cl A Bo(slx:s

IMPORTANT:

• It is recommended that board(s) be installed before the refrigerator is installed.

• Board(s) must be long enough to fully cover the width of the compressor cover.

• Locate the board(s) so the bottom surface(s) of the board(s) is(are) 84" (213 cm) from the floor.

• During installation, raise the refrigerator up so there is 1/4"(6.35 mm) maximum between the top of the refrigerator and the bottom of the anti-tip board(s). Do not crush the compressor cover when raising the rear leveling legs.

To Install Anti-tip Boards

1. Mark the stud locations on rear wall 80" to 90" (203 cm to 229 cm) above floor.

2. Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 cm) (or longer) wood screws. The wood screws must be screwed into the studs at least 11/2"(3.8 cm). The board(s) must overlap the compressor cover.

A B

Place an appliance dolly under the left side of the refrigerator as shown. Place the corner posts from the packing materials over the trims and handles as appropriate to avoid damage. Slowly tighten the strap.

NOTE: Pass the dolly strap under the handles for the Architect _Series.

2" (5 cm)

A. Center board _" (6.35 mm) max. above refrigerator B. 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards (2) C. Attach to studs with six #8 x 3" (7.6 cm) screws D. Compressor cover

Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line

is connected, turn the ice maker OFR

Connect to Water Line

Parts Needed

• Minimum 7 ft (2.13 m) flexible, codes approved water supply line

Style 1--Shutoff Valve Connection NOTE: If your water line connection does not look like Style 1,

see "Style 2--Copper Line Connection."

1. Unplug refrigerator or disconnect power supply.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from becoming clogged.

2. Connect the flexible, codes approved water supply line to the water shutoff valve by threading the provided nut onto the

shutoff valve as shown. NOTE: The shutoff valve shown is in the side cabinet as

recommended.

A. Bulb C. Water tubing B. Nut

3. Place the end of the tubing into a bucket, and turn shutoff valve ON.

4. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 2--Copper Line Connection NOTE: If there is a water supply line that meets the specifications

in "Water Supply Requirements," proceed to "Connecting to Refrigerator." If not, use the following instructions to connect to the household cold water supply.

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3. Locate a 1/2"to 1V4"(1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from the drill and keep normal sediment from collecting in the

valve.

4. Determine the length of copper tubing you need. Measure from the connection on the refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use 1/4"(6.35 mm) O.D.

(outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a 1/4"(6.35 mm) hole in the cold water pipe you have selected.

................................A

G ...........................B

...................C

A. Cold water pipe E. Compression sleeve

B.Pipe clamp F. Shutoff valve C. Copper tubing G.Packing nut D. Compression nut

6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm) drilled hole inthe water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal.

Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from becoming clogged.

7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten the clamp or the sleeve. This will crush the copper tubing.

8. Turn off the shutoff valve on the water pipe. Coil the copper tubing.

9. Connect the flexible, codes approved water supply line to the water shutoff valve by threading the provided nut onto the shutoff valve.

10. Place the end of the tubing into a bucket, and turn shutoff valve ON.

11. Check for leaks around the saddle valve. Tighten any nuts or connections (including connections at the valve) that leak.

Connect to Refrigerator

Parts Supplied

• 1/4"to 1/4" 6.35 mm to 6.35 mm) male-to-male

61t 6 It

(15.2crn)lI

1 "

(2.54cm)

I (17.78 cm)

coupling

NOTE: The flexible, codes approved water supply line should connect to the supply valve through the floor.

1. Unplug the refrigerator or disconnect power.

2. Connect the 7 ft (2.13 m) flexible codes approved water tube to the water supply valve.

3. Flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes

clear.

4. Tape the 7 ft (2.13 m) flexible codes approved water supply line to the floor, 7" (17.78 cm) from the left side of the refrigerator. Tape along the length of the tubing, which will allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes approved water supply line to be loose at the front of the refrigerator for connecting to the refrigerator.

5. Connect the 7 ft (2.13 m) flexible codes approved water supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the refrigerator, a secondary water shutoff valve may be installed

in line with the water supply line at the front of the product.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: To avoid floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before

moving.

1. Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2. Do not remove film or cover.

3. Move the refrigerator straight back and evenly into the opening. Be sure that the refrigerator side trims are not interfering with the door opening. Also, be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

A. Household water line B. Nut (purchased)

C. Ferrule (purchased) D. Coupfing

Turn on the water supply valve and check all connections for

E.Bulb F Nut

G. Refrigerator water tubing

leaks.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving refrigerator and not for permanent support.

After moving the refrigerator to its final location:

1. Use a 5Ae"socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be

off the floor.

1. Set control switch at top of cabinet to the OFF position.

2. Plug into a grounded 3 prong outlet.

A. Rear leveling bolt B. Front leveling bolt

Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinetry. The cabinetry surface must be plumb for the ideal fit of the refrigerator side trim.

Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least 1" (2.54 cm) of the top soffit.

NOTE: If an anti-tip board has been used, adjust the leveling legs until the top of the refrigerator is within 1/4"(6.35 mm) of the bottom of the anti-tip board as shown. Do not crush the compressor cover.

A B

• Jenn-Air is not responsible for the removal or addition of molding or decorative panels that would not allow access to the refrigerator for service.

Door Panel Installation

1. Remove all tape and door bracing from the refrigerator and freezer doors.

2. Open the refrigerator and freezer compartment doors.

3. Remove the handle side and top trims.

IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII

A. Center board _" (6.35 mm) max. above refrigerator B. 2" x 4 " x 32" (5 cm x 10 cm x 81 cm) boards (2) C.Attach to studs with six #8 x 3" (7.6 cm) screws D. Compressor cover

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with

the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than

50 inch-pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1Y4"

(3.18 cm) below the rollers.

For Classic and Overlay models, additional adjustments may be needed after the custom panels are installed.

IMPORTANT:

• Install the custom handles prior to installing the panels on the refrigerator. For more information on Jenn-Air custom handle selection, refer to the Jenn-Air Catalog, visit www.jennair.com, or call 1-800-JENNAIR (1-800-536-6247). In Canada, visit www.jennair.ca, or call

1-800-807-6777.

• Create custom door overlay panels according to the specifications in the "Overlay Series Custom Panels" section.

A. Trims

Slide the custom panels into the bottom and hinge side trims on the refrigerator compartment and freezer compartment

doors, making sure that the backer panel fits into the hinge side trims.

llIllllllllllllllllllllIlllllllllllllllllll

A. Panels

Reinstall the handle-side and top trims.

Remove the skin from the screw covers. Slide or snap the screw covers into the handle trim section.

7. Check refrigerator level and alignment. Adjust if needed.

Top Grille Panel

1. Grasp both ends of the top grille.

2. Push straight up, then pull straight out. Place the top grille panel-side down on a soft working surface.

B A B

Euro-Style and Pro-Style ®Styles Remove the door stop screw from the bottom side of the hinge with a 3/8"open end wrench.

A. Top grille

B. Cabinet side trim

Remove one end cap by loosening the nuts and sliding off the end cap.

......................B

A.Bottom rail C.End cap B.Nuts D. Toprail

Slide the backer panel into the top grille channel and reattach the end cap.

A B C

A. Bushing B. Door stop screw C. Locking plate

Overlay Style Remove the two door stop screws: one from the bottom side using a 3/8"open end wrench and one from the top side using a 8/32"hex key.

A B

A.Door stop screw from bottom B.Door stop screw from top (110 °)

Remove the locking plate as shown.

A. Backerpanel

Replace the top grille in the cabinet side trims and pull the panel down slightly to lock it into place.

B A B

A. Top grille

B. Cabinet side trim

Door Height Adjustment

Use the following steps to adjust the door height, up or down, after the doors have been leveled.

1. Open the freezer or refrigerator door. Locate the bottom hinge and remove the door stop screw.

3. Turn the bushing located underneath the bottom of the hinge using a 1/2"open end wrench. Turning the bushing to the left will lower the door. Turning the bushing right will raise the

door.

4. After adjusting, check the doors to make sure they are even at the top and bottom. If the doors are not even, continue to turn the bushing to adjust the door height.

5. Replace the locking plate.

6. Turn the bushing slightly to align the hinge and locking plate screw holes.

7. Replace the door stop screw or screws and tighten. IMPORTANT: Do not place the door stop screw in the 130 °

position on Overlay Series models unless the custom panels have been routed on the hinge side. See "Overlay Series Door Panel and Cabinetry Clearance."

+ 47 hidden pages